fd747a0ffc9526ea5ff87b1745354932b4d0fd39
38
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Vito
|
fd747a0ffc |
fix(inspect): keep a replaced video in place until its pipeline has started (#291)
WebKit (GStreamer) deadlocks the page when a video leaves the page or the viewport before its pipeline has started: the main thread changes the pipeline state and waits for the source's streaming thread, which waits on the main thread in a synchronous bus handler (native stacks of the hung WPE web process in the pinned image). Removing, hiding or merely pushing the video below the fold all hung; none of pause(), removing src, load() or the revoke was the cause on its own. A video replaced while still starting now stays where it is, inert and aria-hidden, with the new preview inserted after it, and the session's revoke of its URL waits. Once it reports metadata or an error (or after 15 s) it is paused, loses its src, is reset with load() and removed, and only then is its URL revoked. Every released video is reset with load(), so no decoder is kept per replaced video. The loadstart replacement spec now runs on WebKit too (15 fresh pages, replaced at loadstart + 0-4 ms). TESTING.md D62 records the cause. |
||
|
Vito
|
3b1d00501f |
fix(config): serialized config store and registry admission (#289)
* fix(config): report settings persistence failures (#220) Settings saves now go through one serialized config store (py/config_store.py). A commit re-reads config.json under a process lock, applies the change to a copy and replaces the file atomically (temp file beside it, fsync, close, os.replace), so a failed write leaves the old file in place. POST /prompt_manager/settings commits first and only then publishes the values at runtime. A write failure is 500 config-write-failed, an unparseable config.json is 409 config-unreadable (the file is kept instead of replaced) and a stale expected_revision is 409 settings-changed. A save reports persisted, revision, runtime_applied and restart_required_fields; GET adds the revision. Only submitted keys are written; other sections and the CivitAI key are kept. * fix(lora): report integration save failures (#220) POST /prompt_manager/lora/enable commits integrations.lora_manager through the config store and publishes the runtime values only after config.json holds them. Before, it set the runtime values, rewrote the whole runtime config (dropping sections it did not know) and reported success even when the write had failed. A write failure is 500 config-write-failed and changes nothing at runtime; an unparseable config.json is 409 config-unreadable. The body goes through the capped JSON reader and the flags must be booleans. A trigger word cache that fails to load is reported as persisted:true, cache_loaded:false. The CivitAI key is never echoed. The LoRA tests now write to a temporary config path. * fix(jobs): refuse legacy record-changing operations while a job runs The job registry gains admission classes. A records job is refused while any records or guarded job runs, a guarded job while a records job runs, and read jobs share only the one-job-per-kind rule. record_changing=True stays as the spelling of records. Job summaries add cancellable and admission, and a non-cancellable job ignores cancel. JobRegistry.hold() registers a running, non-cancellable job for a legacy-page operation and ends it when the request does. The legacy restore, maintenance, prompt cleanup, duplicate image delete, LoRA import and batch auto-tag routes hold as records; thumbnail generation (both routes) and thumbnail clear hold as guarded. A maintenance run of only read checks holds as read. So a restore during a scan, or a scan during a legacy restore, is refused with the running job named instead of interleaving; this closes the gap noted on #269. Refusals keep each route's shape: the JSON routes return the legacy 409 "<title> already running", and the thumbnail and LoRA streams send their existing error event. * test(lora): keep the preserved-section fixture free of secret values CodeQL flagged the fixture that writes the secret constant into a test config file as clear-text storage. The test only needs a marker value to prove the stored key survives a save. * fix(config): read under the commit lock and publish saves in write order - ConfigStore.read takes the commit lock, so no read handle is open while config.json is replaced (Windows refuses that replace). - os.replace is retried briefly on a Windows PermissionError (antivirus or indexer handles) before the save is reported as not written. - The temp file is written beside realpath(config.json), so a symlinked config keeps its link and a bind mount fails truthfully. - commit() takes a publish callback that runs under the lock after the write; settings and LoRA saves publish there, so two concurrent saves reach the runtime in write order and the runtime ends on the last one. - The concurrency tests now wait until the second caller is blocked on the lock (tests/lock_probe.py) before releasing the first. * fix(jobs): require an admission class, admit holds on entry, true Activity states - JobRegistry.start raises TypeError when neither admission nor record_changing is given, so a new job never runs as "read" beside a scan by omission. - hold() admits when its block is entered, so a hold that is never entered leaves no running records job behind; callers that answer a refusal in their own way check blocker() first, with no await before the block. - A held SSE operation that ends in an error event (thumbnail generation, legacy batch auto-tag) is listed as failed, and refused input (duplicate delete without paths, an unreadable thumbnail body) is answered before the hold, so it is not listed as a job. - Activity keeps a job's cancellable flag (true when an older server omits it) and shows Cancel only for a running, cancellable job, in Recent work and in the job view. A held legacy job no longer offers a Cancel that does nothing. * fix(admin): legacy pages show why a request was refused A job running in the workspace refuses the legacy record-changing requests, and a corrupt config.json refuses a settings save. The legacy pages now name the reason instead of hiding it: - LoRA import: the busy and failure frames carry status and progress, and the admin modal handles type "error": it shows the message, notifies and closes, instead of staying on "Initializing..." at 0%. - Legacy batch auto-tag: a refusal by another job is a 200 stream with one error frame ({type, status, message}), which both pages already render; a second batch keeps its exact JSON 409. - Gallery cache clear: a refused server clear shows the reason and stops before the success toast and the "Not generated" reset. - Admin settings save and maintenance show the reply's error ("config.json cannot be read...", "Scan for metadata already running") instead of "Failed to save settings" or "HTTP 409: Conflict". - Tests cover the read-only /maintenance branch: a read-only selection runs during a scan as a read hold; a mixed or default selection is refused. * refactor(api): move the settings routes out of admin.py GET and POST /prompt_manager/settings, their validation, the config commit and runtime publication, and the shared commit-failure reply now live in py/api/settings_routes.py as SettingsRoutesMixin, before S3 adds host fields there. No behaviour change: the same routes, payloads and status codes; admin.py drops about 300 lines. * chore(coverage): raise the floors of the frontend files this round touched admin.js, gallery.js, activity.mjs and activity-job-view.mjs, to their measured coverage. No floor is lowered. * fix(admin): the gallery starts no thumbnail status read while it leaves The gallery's startup thumbnail check runs one second after load. When that second ended while the page was leaving (CI, WebKit: the workflow test navigates from the gallery to the admin page), WebKit failed the new read with "Fetch API cannot load ... due to access control checks." and Playwright reported a page error. Like the admin page (#290), the gallery now has a page lifetime that ends on beforeunload and pagehide (and starts again on a back/forward restore). The check starts no read once it has ended and passes it as the read's signal. A page-clock workflow test that leaves before the second ends failed on both events, in Chromium and WebKit, before this change. |
||
|
Vito
|
a8aff3a39d |
feat(annotations): bulk Add tags and Auto-tag selected as Activity jobs (#283)
* feat(activity): image tagging jobs for bulk Add tags and Auto-tag
POST /prompt_manager/jobs/image-tags starts one record-changing
"image-tags" job over 1..500 listed images (202, or the same 409 busy
envelope as /jobs/scan). Add tags hashes each current file and unions a
fixed set into that byte record; Auto-tag captures each still image, asks
one legacy engine for its top N suggestions on the capture (count from
the options or autotag.defaults.suggestion_limit), re-hashes the file and
unions only onto the same bytes. Outcomes are grouped as tagged,
unchanged, skipped (video, too large, file changed, file not found, not a
still image) and errors; cancel stops at a file boundary.
Auto-tag holds the shared model gate for the whole job (409 model-busy at
start when it is held), loads the model once and never downloads one: an
unavailable model fails the job before the first file. The registry gains
blocker() so a start answers busy before taking the gate.
* feat(annotations): Add tags and Auto-tag selected in the selection bar
The Images selection bar gains the concept's Add tags and, beside it,
Auto-tag selected (D85). Add tags starts the image-tags Activity job with
the dialog's comma-separated names; Auto-tag selected reuses the Tag image
model panel (server defaults, Suggestions count) without Generate, refuses
a model that is not downloaded, and either starts the job (Apply
automatically) or walks the selection one Tag image dialog at a time
(Review each image, D90). Busy, model-busy and refused starts toast why;
the selection stays; a finished job's files are read again.
* feat(activity): show image tagging jobs with their own outcomes
Image tagging jobs get their own Activity view (D89): the pill reads
"Tagging", the item and heading line name the images and end with
"N tagged · M errors", and the job view shows Tagged, Unchanged, Skipped
and Errors tiles and outcomes, opens Tagged and Unchanged rows in the
viewer, and reads "Tagging log" and "Cancel tagging". The per-kind table
lives in activity-store.mjs; the scan's view is unchanged.
The selection bar's copy without a concept line is recorded as D117.
* fix(annotations): final review round for bulk image tagging
- Rename the D117 copy deviation to D118 (D117 belongs to another PR).
- The tagging job's progress line gives the scan's "about X min left"
estimate, with each finished file as one batch.
- The start body cap fits 500 targets of the longest legal path, even
escaped; one byte over answers 413.
- A capture store at capacity is retried with a short backoff, then the
file is skipped with a rerun sentence instead of a Tag-dialog error.
- Output roots and their labels are resolved once per job in the
executor, not twice per file on the event loop.
- Review each image holds Stop reviewing, Escape and x while a save is in
flight, and its primary reads "Save and next" when only the manual
field would be saved.
- An Add tags field that parses to no names keeps the dialog and its
text and reports the message on the field.
- Image tagging finish toasts carry the counts ("... finished · N tagged
· M errors").
- Specs: the bulk spec waits for the answered Start before checking that
the invalid press sent nothing; the Activity spec uses a real error row.
|
||
|
Vito
|
9dcad31441 |
chore(coverage): raise the activity-scan floor to its measured coverage (#285)
The floor sat at 64% branches while every run measures 75%, so each branch's coverage:update raised it and had to revert the change by hand. |
||
|
Vito
|
e29ff4d4b2 |
feat(inspect): the Inspect page for local files (#280)
* feat(inspect): local adapter seams in the shared inspector and viewer
The inspection loader calls adapter.read when an adapter reads by itself, so a
file chosen in this browser never reaches the API. The full inspector shows the
D66 local provenance (no Path row, no Show in folder, local association line),
and the viewer uses adapter.mediaUrl exactly, so a blob: URL is never given the
_pm_viewer cache-buster and Retry media reuses it. Rooted and recorded-history
adapters keep their api.get paths and cache-busted originals.
* feat(inspect): owned local selection session
createLocalSession owns one chosen File at a time: it classifies the bytes,
creates the blob: URL only for a classified image or video, and reads it
through a real inspection controller with the local adapter. Replacement,
dispose, parent abort and pagehide each release the URL, the handle and the
record once; a released handle (and every copy) is foreign to the adapter, and
every await is fenced by a generation counter so a replaced read never
publishes. Empty, multiple and directory drops keep the previous selection.
Baseline entry for local-session.mjs; branch floors raised for the touched
inspection-state.mjs and local-inspection.mjs.
* feat(inspect): native Inspect a file page
#/inspect is now the concept's "Inspect a file" page instead of the legacy
handoff. One chosen or dropped image or video previews inline, and the one
heading action, "Open file metadata", opens the shared viewer with the full
inspector on a record read entirely in this browser. Nothing is uploaded,
imported or stored; only an explicit Send crosses the host bridge.
- inspect.mjs mounts the concept DOM (surface, file-drop, #local-preview)
under the shell heading, owns one local session and the shared viewer and
prompt sender, and releases media before the session revokes its URL on
replacement, route change, page leave and dispose (D60-D65).
- A file that cannot be read after choosing opens the inspector's
unreadable state when the browser declares a supported type, instead of
the "unsupported" copy; the local adapter maps a browser read failure to
an unreadable record.
- The route is native; Overview keeps its card to the legacy metadata page,
which is unchanged.
- workspace-inspect.spec.mjs covers the chooser and viewer rail against the
Images rail for the same bytes, drop, cancel and reselect, unsupported and
unreadable files, video, URL ownership, mid-read replacement, exact send
and the no-request/no-storage rule.
* test(inspect): concept parity and managed-host send for local files
Compare the native Inspect a file page with the immutable concept's
#metadata at 1600x1100 and 390x844 in both themes (initial, selected,
viewer-open), mapping D60-D66 and pinning the concept's CSS values and
the chooser's displayed file name, with a mutation check. Send a local
PNG (explicitly empty negative) and core-tags.webm to a real Prompt
Manager (+/-) node across Classic and Nodes 2.0 switches and reloads;
a connected input rejects the send unchanged. Document D60-D66, the
legacy-floor dispositions and the commands in TESTING.md.
* fix(inspect): reset a released preview video in the next task
On WebKit (GStreamer) a video replaced while its pipeline was still
starting blocked the page: pause, src removal and load() in one task
never returned, so the next chooser selection hung (CI page workflows
webkit shard 2/2, "URLs and media end with their owning session").
The src is still dropped before the URL is revoked; only the load()
reset moves to the next task. A fresh-page regression replaces the
first video as soon as it shows, fifteen times.
* fix(inspect): never reset a preview video that is still starting
Deferring load() to the next task was not enough: CI on
|
||
|
Vito
|
195a1d33ac |
feat(annotations): Tag image dialog, card Tag button and inspector tag chips (#281)
* feat(annotations): image tagging controller with staged suggestions Add the UI-agnostic Tag image dialog controller (#249 C1): observe the file into a capture, prefill the saved tags and the server's tagging defaults, stage the top suggestions as removable chips, and save manual tags plus the remaining chips with case-insensitive dedupe (manual spelling first). Every read is serial-guarded; saves are sent once and a lost answer is resent identically only by Retry. Conflict, storage, file and capture outcomes keep the draft and gate Save on a reopen. ApiError now carries a validated copy of a tag-conflict body's current tag set so the dialog can show it. * feat(annotations): Tag image dialog beside Info on every image card Every Images and Library-embedded gallery card shows the concept's Tag after Info. Tag opens the concept's Tag image dialog (image-tagging.mjs over the C1 controller) in the shared modal shell with the sticky tagging-modal footer: capture preview, manual tags, the four legacy engines with real defaults, explicit Generate, removable suggestion chips (D83), legacy model labels (D84), a Suggestions count (D91) and Retry where the controller allows it. The capture is released on close, route change and pagehide. The Tags page gains the concept's Auto-tag images for the image selected in Images (aria-disabled without one, D115) and real Images counts that follow every save. Retires D9, #245 D2 and #245 D3. The toast now uses the mock's copy verbatim ("tags" even for one), C1's D60/D61/D68 markers are renumbered to D83/D84/D91, and at extreme zoom a card's info row stacks (and wraps Info and Tag) when its row is narrower than the narrowest bounded card, list rows included (D31). * feat(annotations): show image tags in the inspector and viewer The inspector parses the B3 envelope's image_tags facet (strictly: exact keys, current/none/unavailable, at most 100 vocabulary names) and draws one chip row after the prompt blocks: the file's current image tags first, then D21's linked tags not already shown (case-insensitive). In the Images panel image tags are Tags filter buttons and linked tags keep D21's rule; in the viewer and wherever no Tags filter exists every chip is plain. none and unavailable add no chips (D88, plan D65; D21 amended). The tagging fixture reset now drops leftover captures, so a long run of tagging tests in one worker stays below the capture store's limit. * fix(annotations): re-read a tagged file in place after a save After a tag save the selected file's inspection is re-read quietly: the panel and the viewer keep the current details until the new answer lands, with no "Loading file details…" in between. While a Tags filter or a search is active, Images re-reads its loaded range in place (same query, from the first page up to the loaded count, published once), keeping the cards, the scroll position and the selection while the selected file still matches; when it no longer matches, the panel follows the collection. * fix(annotations): give suggestion chips the concept chip corner The D83 chips took the later `.tag-suggestion` row rule's 5px corner; the concept `.chip` has 4px. The concept comparison of the Tag dialog found it. * test(annotations): compare the Tag dialog with the approved concept The Tag image dialog's inventory (order, text, field attributes, tokens, preview box, chips, status, sticky actions) must equal the concept's at 1600x1100 and 390x844, dark and light, opened, generated with WD14 and with a language model, for an empty result and in the review scope, and the card's Info and Tag group must equal the concept's. Production runs on the concept fixture with the concept image's tags saved and the fake model answering the concept's own sample; only D29, D83, D84 and D91 are mapped, and a mutation check shows the comparison notices a change. The D3 footer check again asserts a strictly shorter footer, with short seedless subtitles that stay on one line beside Info and Tag. * fix(annotations): final review round for the Tag image dialog - Option fields show the server defaults that Generate sends: the controller bumps an options revision on open and on a model change, and the panel re-renders only then (I1). - A tag conflict shows the current set at once ("Saved now: ...") and puts it ahead of the draft in the manual field, so the next Save sends what is shown (I2). - The opening sentence is the concept's on-screen copy; "Remove anything you do not want to add." leads the chips only while chips exist; the comparison's opened mapping is gone (I3). - ApiClient gains an additive keepalive option; the capture release and the Save PUT use it, and pagehide closes the dialog (I4). - Closing during a save keeps the capture until the PUT settles, then releases it and still reports the outcome (toast, page refresh) (I5). - A refresh asked during a page load is pending and runs once it settles; re-reads use pages up to 200 files; a failed re-read toasts; Load more waits for a refresh (I6, M2, M3). - The selection bar drops checked files a refreshed result no longer lists (I7). - D116 records Retry; after a failed Generate it takes Generate's own path, and after a changed storage, file or expired capture it observes again keeping the draft (I9, M4, M5). - A save made from Tags marks a filtered Images visit stale (M6). - images.mjs drops under 800 lines: the tagging wiring moves to images-tagging.mjs and the favorites star to images-favorites.mjs (unchanged), and reset() reuses dropSelection() (M1). - Restore the activity-scan.mjs coverage floors; drop the duplicate paired captures test (I8, M9). * fix(annotations): coverage floors for the Tag dialog round Floors for the new images-favorites.mjs and images-tagging.mjs, and the measured raises of image-tagging-state.mjs and image-tagging.mjs. activity-scan.mjs keeps main's floors. |
||
|
Vito
|
0095db8cbc |
feat(inspect): local evidence readers for images and videos (#277)
* feat(inspect): bounded browser PNG reader matching the server's
The Inspect page will read a chosen file entirely in the browser, and the
record it shows must equal what Images shows for the same bytes. This adds
to web/js/png-metadata.js (loaded by the legacy pages as before, with
parsePngTextChunks unchanged):
- readPngMetadataFile(file, {signal, prefix, yieldControl, decompress}):
a port of utils/prompt_inspector.py's _png_metadata, _PngRecords,
_png_text, _inflate and _batch_normalized. It slices only chunk headers,
80-byte keyword prefixes and the retained prompt, workflow, parameters
and comfyassets_prompt_pairs records, CRC-checks what it keeps, applies
the same budgets (2 MiB shared role budget encoded and decoded, 4 MiB
workflow that becomes limited, 8 MiB and 4 MiB duplicate budgets, 4 MiB
duplicate decoded parameters, 10,000 chunks, the batch-index rule for
parameters copies) and compares duplicate chunks byte for byte. Every
range is checked against file.size before slicing and charged against a
19,794,389-byte ceiling, so a multi-gigabyte PNG costs only its metadata.
Compressed text inflates through DecompressionStream with one 256-byte
write in flight and the output capped at the record's allowance; an
AbortSignal rejects the read with an AbortError and leaves no unhandled
rejection; yieldControl runs about every 8 ms of work.
- classifyPrefix(bytes): png, jpeg, webp, iso-bmff, matroska, avi, asf or
null from the first 32 bytes.
- readImageHeader(file, kind): JPEG (SOFn walk as Pillow) and WebP (VP8,
VP8L, VP8X) dimensions from at most 64 KiB.
tests/test_local_inspect_parity.py drives tests/js/support/local-inspect-
oracle.mjs over the committed and test-time inspection parity corpus plus
compressed, oversized, Latin-1, batch-duplicate and all-four-record shapes,
and asserts records, record formats, dimensions and readability equal
read_inspection_file on each file; the two JPEG/WebP fixtures are checked
against Pillow. tests/js/png-local-reader.test.js pins each server rule,
the sparse 3 GiB read, the prefix reuse, inflation back-pressure and abort.
tests/fixtures/local-inspect/tiny.{jpg,webp} are CC0 FFmpeg test patterns.
* feat(inspect): bounded browser video tag readers
Add web/js/workspace/local-video.mjs: ISO-BMFF (MP4/MOV/M4V) and Matroska
(MKV/WebM) walkers that read only the container tags the server asks ffprobe
for, slicing box and element headers, carrier names and retained values within
the server's budgets and never a byte inside mdat or a Cluster; a port of
utils/video_metadata.select_video_carrier with the record budgets of
read_inspection_file; and a byte-exact json.loads/json.dumps round trip so
envelope objects reserialize as the server spells them.
Every naming rule mirrors ffprobe 9.0.2 on hand-built files: legacy ilst atoms,
mdta keys, joined repeats, data types, Matroska language and default handling,
and Tags behind a Cluster found only through a SeekHead.
Tests: node units over byte-exact container builders and the committed
fixtures; a Python parity test comparing the local carrier with the server's
selection from the same tag maps (mocked probe) and from the same files (real
ffprobe, including 1 MiB + 2.5 MiB per-key records); an ffprobe
characterization of the recorded fixture maps.
* feat(inspect): server-identical local projection and payload
Port utils/inspection_response.py to the browser: a strict parse with Python's
Decimal spelling, duplicate-key rejection, NaN/Infinity as null and integers
past 2^53-1 as text; the prompt, workflow and carrier projection with the
depth-64 and 20,000-node ceilings; _metadata; and the 8 MiB omission steps
(workflow graph, then prompt graph, then all raw) measured as UTF-8 bytes.
local-inspection.mjs builds the inspection_version 1 wire for one chosen File
from the Task 1 and Task 2 readers (observation selected-local-file, interim
unresolved roles, unavailable library), fits it to the response budget, and
exposes localFileAdapter for the shared controller, inspector and viewer:
handles are session-owned by a private token, so a tampered or hand-made
descriptor is rejected and blob: URLs are never resolved through the API
client. projectInspectionPayload admits selected-local-file only for a
local-file identity.
A Python oracle test compares projectMetadata with _metadata byte for byte over
the parity PNG corpus, the committed video fixtures and tag maps, 75 committed
adversarial record sets (projection-cases.json) and node-ceiling sets built at
test time.
* test(inspect): import oracle modules by file URL for Windows
The local-inspect oracle imported product modules with path.join(...), which
Node parses as a URL scheme on Windows (D:\... -> ERR_UNSUPPORTED_ESM_URL_SCHEME),
failing every tests/test_local_inspect_parity.py oracle test on the Windows CI
job. Every dynamic import in tests/js/support now goes through moduleUrl, a
pathToFileURL wrapper, and a node unit proves the Windows form on any host and
scans the oracles so a path import cannot return.
* fix(inspect): read video tags as ffprobe reports them
Same bytes now give the server's record in five shapes where the local
reader was stricter or kept different tags (PR #277 final review I1, I2,
M1, M2, M4):
- Invalid UTF-8 in a tag value is replaced as ffprobe's default
string_validation=replace does (av_utf8_decode, one U+FFFD per failing
decode step), instead of failing the read. Key names and TagNames that
do not decode are no carrier and are skipped.
- An ilst item whose keys index is 0 or out of range is skipped, as
ffmpeg does, instead of failing the read.
- Only the first keys box is read, as ffmpeg does.
- A first per-key workflow over 4 MiB keeps its place in the carrier
choice as an unread marker, so the server's carrier (per-key, workflow
limited) is chosen; when the server's first probe would overflow, the
re-probe leaves it out and its own bound applies.
- An envelope integer of more than 4300 digits fails the Python json
port, so that envelope is skipped as CPython's json.loads skips it.
Each shape was checked against ffprobe 9.0.2 and read_inspection_file;
the real-ffprobe parity test now builds them, and a 600-case random-byte
comparison of the replacement against ffprobe matched.
* perf(inspect): measure the local response size natively and yield between steps
fitInspectionPayload counted the UTF-8 size of an 8-12 MB wire with a
per-character loop and ran every omission step on the main thread in one
turn (PR #277 final review M7). The size is now counted by TextEncoder
encodeInto through one bounded scratch buffer, and each re-measure
follows a yieldControl turn, with an abort signal checked between steps.
The fit is async; the fitted payload is the same as before.
* fix(inspect): hold video tags as ffmpeg's dictionary does, decode Mac Roman text
Three more same-bytes divergences, found while verifying the review
fixes against ffprobe 9.0.2 and read_inspection_file:
- ffmpeg keeps one tag per ASCII-folded name under the spelling set
last (ISO-BMFF joins the values with ";", Matroska keeps the last), so
PROMPT and Prompt are one record on the server; the local reader kept
both and failed the read as a duplicate. A legacy comment atom and a
later COMMENT key likewise leave no exact-case envelope.
- ffprobe's format_tags filter folds ASCII case only, so a name that is
"workflow" only under Unicode case rules is never reported; the local
reader took it.
- ISO-BMFF data types 0 and 3 are Mac Roman text to ffmpeg, written into
twice the input size (a long value is cut); the local reader decoded
type 0 as UTF-8 and skipped type 3.
The real-ffprobe parity test builds each shape.
* docs(testing): list the local Inspect divergences; raise touched coverage floors
TESTING.md now tracks the local Inspect (#249 PR L1) divergences that
remain after the review fixes, each checked on a host with ffprobe 9.0.2:
media kind by bytes versus extension (parity is for the same bytes with a
matching extension), JPEG dimensions past the 64 KiB header read, classic
QuickTime udta text atoms, raw versus escaped tag bounds, the 10,000
element ceiling, unknown EBML DocTypes, the JSON depth approximation and
the C _decimal assumption.
coverage:update raised the branch floors of the three local Inspect
modules this PR touches; the unrelated activity-scan raise it proposed is
left at main's values.
|
||
|
Vito
|
f95f66d76a |
ci(browser): run page workflows with parallel workers and CI shards (#274)
* test(browser): one test server per Playwright worker The page workflows started one global webServer and ran with one worker. Each worker now owns its own tests/browser/server.py on an OS-chosen port, with its own temp root and database, through a shared `test` in tests/browser/fixtures.mjs. baseURL, and so page, request and browser.newContext, point at that worker's server. A server that dies fails the running test with its stderr tail and the next test gets a fresh one. The worker count comes from PM_TEST_WORKERS, else 1 under CI, else a quarter of the CPUs up to 8. Chromium workflows in the pinned image: 510 tests in 606 s with one worker on main, 511 (one new isolation spec) in 119 s with eight. * test(browser): test servers bind an OS-chosen port themselves tests/browser/server.py accepts --port 0: it binds 127.0.0.1:0 before building the app, holds that socket for its whole life and prints PM_TEST_SERVER_PORT=<n> to stdout. startBrowserServer defaults to port 0 and reads the announced port, so no port is reserved and released before the server binds and two launchers can no longer race for one. The "address already in use" retry and free-port.mjs are gone; --port N still works and is checked against the announcement. * ci(coverage): shard and merge modes for the frontend coverage run frontend-coverage.mjs now plans its steps from the command line. No arguments still runs everything, then reports and checks. --shard I/N runs one slice of the chromium+touch workflows into coverage/js/raw without wiping it or reporting; shard 1 also runs the node units and the viewer suite. --merge-only reports and checks over raw coverage the shards wrote, with --update-baseline as before, and refuses an empty or missing raw dir. npm scripts: test:coverage:shard and coverage:merge. * ci(viewerjs): run browser suites with workers and shards Frontend coverage runs as three shards (PM_TEST_WORKERS=3 each) that upload their raw V8 files as coverage-raw-N; a merge job downloads them, fails unless all three arrived with raw files and no clashing names, then runs coverage:merge. Firefox and WebKit page workflows run as two shards each with three workers. The required viewerjs context keeps its name and now needs the shards, the merge and the browser shards, failing unless every one succeeded. * ci(viewerjs): cache npm downloads and size timeouts from the first sharded run The first sharded run lost a webkit shard to its 12-minute limit after all 267 tests passed, and npm ci stalled for 5 minutes in six of eight jobs. Each npm ci now restores npm's download cache keyed on the vendor lockfile, and browser job timeouts are the measured times plus at least 50%, never under 20 minutes. The workflow comment records the measurements. * test(browser): wait for rendering frames, not timers or luck, under load Two Library workflows failed in CI's webkit shard 2/2 (run 39714840809) under parallel load: - "library infinite loading ..." counted cards right after the last page hid "Load more". That render queues the window update for the next frame, so a slow frame left the 120 cards of the all-rows layout in place (received 120, expected < 80). It now waits for the next frame, which runs after every callback the page queued. - "row measurement preserves anchor ..." settled with a 60 ms timer. A scroll event is delivered in a rendering frame, so on a starved renderer the timer ended before the scroll's frame and no card was in view (null anchor). settleLibrary now waits for two consecutive native frames with no Library frame queued, checked inside the frame callback. Before/after: a scratch copy that delays every frame by 120 ms (as a starved runner) failed the old helpers 19 of 40 runs, at the CI lines, and passed the new ones 40 of 40 on chromium and webkit. Throttled to 1 CPU with 4 workers, the original spec failed 1 of 42 for each test. The Tags viewer workflow closed the viewer as soon as its image was visible, before ViewerJS rendered the title, so CI's coverage never ran the page's title callback (tags-page.js functions 26/46 = 56.52%, one function above the floor of 56; locally 27/46). The test now asserts the title names the shown file, which always runs the callback. * test(browser): stable under parallel workers Document how to run the browser suites in parallel and sharded, with the measured times, and what keeps specs stable beside each other: wait for a rendering frame, a response or a visible state, never for time. With |
||
|
Vito
|
a6f6697c50 |
feat(activity): shared job registry, Activity page and Scan for metadata (#269)
* feat(activity): shared session job registry with the scan as its first kind The output scan now runs as the first kind of an in-memory JobRegistry (py/api/jobs.py, replacing py/api/scan_job.py). Each job keeps exact counters, at most 200 outcome rows per group and a log capped at 2,000 lines, with root-relative paths and public root labels only. New routes list, inspect, follow (SSE) and cancel jobs and start the scan (POST /prompt_manager/jobs/scan, 409 busy while another record-changing job runs). The legacy /prompt_manager/scan routes attach to the same job and stream unchanged payloads. * feat(activity): concept Activity page, top-bar button and progress pill The workspace gains the concept's Activity page (renderActivity), its top-bar button and sidebar row, fed by one session job store: a /jobs read, one SSE stream per running job, a 1-30 s capped backoff after a dropped stream and a 15 s list poll while visible. A job the server no longer lists shows as ended, so no pill stays stuck after a restart. D52: the counts show running jobs and hide at 0; the phone top-bar row may wrap. D53: the mockup's progress pill links the running job. D54: real job items with state chips, detail lines and Cancel job. Start and finish toasts follow the spec copy. Fake browser jobs come from tests/browser/workspace_activity_fixture.py. * feat(activity): Scan for metadata with its review dialog and job view Images -> Import keeps Rescan and adds the concept's "Review scan" row as "Scan for metadata". It opens the concept's "Review metadata scan" with the real source count, the fixed "All files" scope, a backup box that downloads the existing database backup, and Cancel / Start scan. Start scan starts the session scan job and opens its view; a start refused by another record-changing job toasts its title as a link. #/activity/<id> is now the approved job-view mockup: the heading with Download report (disabled until Activity-2) and Cancel scan, the Progress surface with the five counter tiles, the Results surface with the outcome list, path filter and capped rows (Added and Already known open the viewer through the listing identity), and the collapsed Scan log. Activity item titles link their views. The scan's progress line groups thousands. Deviations D55-D57 are recorded in TESTING.md. * fix(activity): stop the job store on pagehide and let proxied routes outlive teardown CI's touch coverage run failed "a resolver failure for the ComfyUI link never stops the shell from mounting" with "route.fulfill: Fetch response has been disposed": its trace shows two Library thumbnail requests started by the last route still in the spec's proxy-mount handler while the page fixture was torn down. - The proxy-mount handler ignores only that teardown error, and the workspace and Activity specs unroute with ignoreErrors before teardown. - The Activity store now ends its work on pagehide: the poll and backoff timers stop, the job streams close and a list read in flight is aborted (an older read is also aborted when a newer one starts). A pageshow from the back-forward cache reads the list again. * test(activity): compare the job view log's line height to the hundredth of a pixel WebKit reports the mockup's 11px/1.7 line height as 18.700001px, so the job view comparison failed on WebKit only. The measurement now rounds it, as other engine-dependent values are normalized. * fix(activity): final review round for the job store, job view and scan rows - Store: one failed list read no longer marks running jobs as ended; two in a row, or a good list without them, do (M1). A good read resets the backoff, except for a stream that keeps dropping while the list reads fine (M2). Finished jobs the server pruned are dropped (M3). Numbers group as en-US, like the server's lines (M13). - Job view: a job the store's list no longer has shows the not-found state (M3). Focus moves to the job heading when Cancel scan goes away, and to the item's title link in the list (M4). The detail is read only when its listed rows change or the open log grows, using the summary's new listed and log_length (M12). - Viewer rows open by exact identity: each scan row records its root's listing index, the source must still carry the row's label, and the workspace listing gains an exact `path` filter (M8, M9). - Scan rows name the prompt by its Library title, stored title first (M10). - A toast with a link stays 20 s, and any toast stays while hovered or focused (M14). - A real two-batch scan cancelled after batch 1 keeps partial counts (M7). - TESTING.md: D54, D56 and D57 updated (M5, M6). * test(activity): cover the held and linked toast and a job view pruned by the server Unit tests for the toast's 6.5 s and 20 s timeouts and its hover and focus hold, and a browser test for a finished job's open view after the server stops listing it. Coverage floors are only raised. |
||
|
Vito
|
6e9d8f81fd |
ci(coverage): fast check that every frontend file has a coverage baseline (#271)
The frontend coverage job only reports a missing baseline entry after its full browser run. coverage:baseline-check compares the files the gate measures (same discoverSources) with frontend-coverage-baseline.json in milliseconds and also flags entries for files that no longer exist. npm test runs the same check. |
||
|
Vito
|
e9996996e2 |
feat(views): saved views and Favorites on Images and Library (#268)
* feat(views): saved-views store and API
Add a saved_views table (page images|library, trimmed 1-100 character
name, whitelisted JSON state of at most 4 KB, position, timestamps)
installed through the same validated-savepoint migration as image
favorites. It is optional in old backups and required in a migrated
restore stage; restore rejects a tampered definition, extra indexes and
any row that would fail write validation.
Routes under /prompt_manager/saved-views: GET lists views by position,
POST {page,name,state} returns 201 {success, view}, PATCH /{id} {name}
renames and DELETE /{id} removes, both 404 for an unknown id. The state
must hold exactly the page's toolbar and Refine-this-view keys (Images:
q, category, sort, source, folder, media, tags; Library: q, category,
sort, tags) with their types and sort/media values; anything else is a
400.
Refs #249
* feat(views): Save view, the SAVED VIEWS sidebar and opening a view
The shared toolbar gains the concept's Save view between sort and Filters
on Images and the Prompt library. It opens the concept's simpleInput
("Save this view", "View name", default "Search: <q>" or "My workspace
view", Cancel / Save); an empty name is "Saved view". A save posts the
page's full whitelisted state (toolbar value plus Refine filters) and
toasts "Saved view added to the sidebar.".
The shell adds the concept's SAVED VIEWS label and nav#saved-nav, loaded
with the shell and re-read after every save. Rows use the concept's
links() markup (search icon, name, no count) and link #/saved/<id>.
Opening one mounts its page with the saved state through the page's own
filters, so the toolbar and "Filters · N" (D44) show it; the h1,
breadcrumb and title are the view's name. A removed Source or Folder is
dropped to its default after discovery, so no listing read is rejected;
an unknown id re-reads the list once, then opens Images; a failed list
read offers Retry.
D16 is retired: images-concept and library-concept no longer map Save
view out. New deviations: D49 (no PROPOSED badge) and D50 (no Needs
review row); shell-concept maps Favorites out until Task 3 and compares
a saved row against the concept's. Browser fixtures now wipe
saved_views.
* feat(views): Edit rename/delete and the Favorites saved view
- Favorites is the first SAVED VIEWS row (star icon, name, real count).
The count is the Favorites listing's own limit=1 total, follows the
nav-count rules and is re-read after every confirmed star or unstar.
- #/favorites opens Images filtered to favorites. The workspace listing
takes favorites=1: each selected root's favorites are read through the
image_favorites primary key and matched against the cached scan with the
toggle's case folding; a failed read is an error, never an unfiltered
page. The cursor scope includes the flag.
- Saved Images state gains a required favorites boolean, so Save view on
Favorites reopens the favorites.
- An open saved view's heading leads with Edit: "Edit saved view" with
View name, Delete... (danger), Cancel and Save. Delete... confirms in the
same dialog (never window.confirm). Toasts "Saved view renamed." and
"Saved view deleted."; a delete returns to the view's plain page.
- shell-concept no longer maps Favorites out (Needs review stays, D50).
Recorded as D51 in TESTING.md.
* fix(views): open stale saved views safely and finish the review fixes
Startup and restore now check only the saved_views structure (table,
columns, types, sizes, a JSON object state) and never the value rules,
so a row saved under older rules no longer stops the database from
opening. Reads normalize each view: missing keys take their defaults,
unknown keys are dropped, invalid values default and the name is made
displayable. POST and PATCH still validate strictly.
Only request validation (SavedViewInvalid) maps to 400; database and
internal errors are a logged generic 500. A saved view no longer
replaces the plain Images or Library return state, a toolbar change
while sources load keeps a saved Source and Folder, a state over 4 KB
is refused in the browser with its own toast, the delete confirmation
skips its failure toast after the page is gone, the Edit dialog reuses
the shared field helper, and quick star toggles coalesce into one
Favorites count read.
* test(views): cover leaving a pending saved view and add its coverage floor
A saved view left while the list or a rename is still pending leaves
the next page alone; the shell drops two unreachable heading guards.
workspace/saved-views.mjs gets its frontend coverage baseline entry;
no existing floor changes.
* fix(views): a corrupt saved-view state no longer blocks startup
At startup a saved_views row whose state is not a JSON object is
logged as a warning by id only and left in place. The listing and
rename skip it, so its #/saved/<id> link behaves like a missing view.
Restore stays strict and still rejects a backup holding such a row.
|
||
|
Vito
|
2b8126b7be |
feat(images): card selection checkbox and selection bar (Set category, Export metadata) (#259)
* feat(images): card selection checkbox and the concept selection bar
Every Images card's overlay starts with the concept's "Select <filename>"
checkbox before the star. Checked image keys form the page's selection,
kept across Load more, infinite scroll and bounded re-mounting and cleared
whenever the collection is replaced. The #bulkbar between the filter row
and the gallery shows "N selected" with Set category, Export metadata and
Clear (the first two are wired by the next tasks); Clear empties it.
The interim D8 star rule is removed, and the concept comparison now
measures the overlay with its checkbox and the bar with one card checked.
* feat(images): export the selected images' metadata as one JSON bundle
The selection bar's Export metadata reads each checked image's inspection,
at most four at a time, and downloads prompt-manager-images-metadata.json:
format, version 1, exported_at and, in listing order, the same envelope the
inspector's "Download metadata JSON" saves (one shared builder,
metadataEnvelope). The button is aria-disabled and ignores a second press
while it runs, the selection is kept, and the toast reports the exported
count, the images that could not be read, or that none could (no download).
Also: the bar and its count are built only on the Images page, the
Library-embedded gallery is asserted to have no checkbox or bar, a sort
change is asserted to clear the selection, the checkbox label test asserts
the toggle and an unchanged selection and inspector, and TESTING.md records
that a return to Images keeps the selection while a reload starts empty.
* feat(images): set the category of the selected images' linked prompts
The selection bar's Set category opens the concept's simpleInput dialog
("Categorize selected images", one Category field, Cancel / Apply) and
posts the selection's distinct linked positive ids to
/prompt_manager/bulk/category. Images have no category of their own; the
listing's category filter matches the linked positive's, so that is what
changes. With no linked image checked nothing is posted and a toast says
so; on success the toast counts the prompts and any skipped images, then
the categories and the listing reload (clearing the selection); a failure
keeps the selection. The button ignores a second press while it runs.
The bulk category route now rejects anything but a non-empty list of at
most 1000 positive integer ids (deduplicated in order) and validates the
category with validate_category; bad JSON or a non-object body is a 400.
The response shape and the legacy admin request are unchanged.
* test(images): zoomed card keyboard order follows the concept's checkbox before the star
The card's Tab order is image, Select checkbox, star, Inspect (concept app.js:398), both ways; List hides the overlays as the concept does, so there the image is followed by Inspect.
* fix(api): answer 400 for bulk category ids beyond SQLite's INTEGER range
An id of 2**63 or more passed the parser and made sqlite3 raise OverflowError, which the route turned into a 500.
* refactor(images): move the selection bar into images-selection.mjs and harden its actions
- images.mjs is back under 800 lines; the bar, its checked set, Export metadata and Set category live in images-selection.mjs.
- Busy flags release in finally; the dead guards are gone and the category targets are taken when the modal dialog opens.
- The category write no longer carries the page signal; leaving Images mid-write drops the saved visit so the return reloads.
- The categories and the listing reload together after Set category.
- The Category field stops at the server's 100 characters; the server's updated_count is a tested pure helper.
- New browser tests: leaving mid-export and mid-write, Blob URL revoke, updated_count 0 and a 400 rejection.
- Additive coverage baseline entries for images-category, images-export and images-selection.
- TESTING.md D8 records the dialog deviations and these rulings.
|
||
|
Vito
|
86d82186ee |
feat(images): concept Images page — toolbar, cards, star, viewer, compared against the mock (#258)
* feat(workspace): shared concept toolbar and dialogs
Add the concept's shared page toolbar (search.toolbar with the search
field, category filter, sort and Filters) and its dialogs in one modal
shell: "Refine this view" (Source / Folder / Media / Tags, Apply filters),
"Import & inspect" with only the real operations (Open inspector, Rescan),
and the "Copy prompt" select-to-copy fallback. The sort lists the
concept's three options first (D14); there is no Save view (D16). Every
dialog returns focus to its trigger on close or Escape.
Refs #249
* fix(workspace): bind shared dialogs to the page and its route
- Drop the invented Refine note; every field is real (D14).
- Ignore a late close event once the shell was reopened or replaced, so
an action that opens the next dialog keeps it open.
- Dialog openers require the page scope; disposing it closes and removes
the shell unless a newer page's dialog is open. Every route change
closes the shared dialog before the next page mounts.
- Clear filters also reports category '' so the page clears the toolbar
category, as the concept does.
- The toolbar requires its scope and falls back to the first sort for an
unknown value; dialog callbacks are validated up front.
Refs #249
* feat(images): concept toolbar, filter row and caption
The Images page now renders the approved mock's heading, shared toolbar,
filter row, section caption and infinite continuation (#249, Task C2).
- Heading: "Your generations, their prompts, and the next idea." with
Import (upload icon) before New prompt (primary).
- Toolbar (shared mountToolbar): search over filenames, linked prompt
text, titles and tags; category (the Library's categories); sort
Recently added / Name A–Z / Highest rated, then Oldest first and
Name Z–A (D14).
- Filter row: Grid/List/Masonry segmented control, Thumbnail size,
the scope chip ("All output folders" or "<source> · <folder>") and
"Group by positive prompt →".
- Caption: "N of M images · K positive prompts" from positive_count; a
plain cursor page keeps the first page's count and an unknown count
hides the "· K positive prompts" part. The date span shows
"<Today|Yesterday|weekday> · <Month D>" of the newest loaded result
under a date sort and is hidden otherwise (D17).
- Continuation: "N of M images · more load as you scroll" with Load
more, the concept's end copy, Retry for a failed page, and the
concept's "K more images loaded. N of M." toast.
- The listing sends category, tags and sort=rating (PR B params).
Old control -> new control:
- "Search filenames" field -> toolbar search "Search workspace"
(placeholder "Search prompts, tags, filenames…"), also matching
prompt text and tags
- Source select -> Filters -> "Refine this view" Source
- Folder select -> Refine Folder (all sources' folders and ancestors)
- Media select -> Refine Media
- (new) Tags -> Refine Tags; Category -> toolbar category select
- Sort select (Newest/Oldest/Filename A–Z/Z–A) -> toolbar sort
(Recently added/Oldest first/Name A–Z/Name Z–A, plus Highest rated)
- Layout buttons -> .segmented Grid/List/Masonry in the filter row
- Thumbnail size field -> label.small + select#image-size
- "Group by positive prompt" link -> button.chip "Group by positive
prompt →" (#/library)
- Refresh -> Import -> "Scan an output folder" -> Rescan (D15)
- "Current gallery" link -> removed; Overview's tool cards link the
legacy gallery (D29)
- "All images" h2 + count -> .section-caption #result-count
- .image-continuation -> .infinite-continuation (Retry kept)
Legacy behavior kept: video items, keyboard grid navigation, scroll and
filter restoration, bounded DOM, continuation retry, source-change
recovery (now disabling the toolbar, Filters and Import). The Filters
and Import dialogs close on route change and browser Back.
The shared toolbar (C1) called .some() on select.options, which is an
HTMLOptionsCollection in a browser (only the unit tests' fake DOM gave
an array); setValue and setCategories now spread it first. The layout
segmented control may wrap at extreme zoom (D31) instead of scrolling
the 390px page sideways.
The retired .image-filters, .image-view-controls, .image-toolbar,
.image-layouts, .image-collection, .image-continuation and duplicated
.image-workspace grid rules are gone from images.css.
* test(workspace): model select.options as a browser collection
The toolbar units' fake DOM returned select.options as an Array, so the
toolbar's .some() call passed there while it threw in every browser
(fixed in
|
||
|
Vito
|
9d398f9862 |
feat(workspace): concept shell — sidebar, topbar, heading and footer on the approved mock's CSS (#256)
* build(workspace): vendor the approved concept stylesheet with a drift check * refactor(workspace): adopt the concept stylesheet as the workspace base * feat(workspace): concept sidebar with real navigation counts * feat(workspace): concept topbar with Theme and ComfyUI link * refactor(workspace): one concept heading and footer for every route * fix(workspace): keep the canvas link on the proxy mount A resolver failure no longer stops the shell from mounting: the ComfyUI link falls back to the root read from the page's own mount path (never another origin). Tests cover a non-standard /ComfyBackendDirect mount, including that no request escapes it. * test(workspace): concept fixture and shell comparison * test(workspace): concept fixture carries the concept inspector facts * fix(workspace): match the concept brand name and compare shell hover states * test(workspace): shell comparison mutation check and docs Add mutate() to the shared concept inventory and a shell mutation check: a nav-row min-height rule and a removed .breadcrumbs each make the comparison fail with the changed path. Harden the resolver-failure guard test with an injection count, make the overlay lint fail when workspace.css is missing, mark the library.css .row-actions leftovers for PR E, and document the concept CSS base, the overlay lint, the comparison method and the recorded shell deviations in TESTING.md. * fix(workspace): focus the page title on a route change A sidebar or history navigation now focuses #page-title, as the concept does on every hashchange (app.js 1168), so a screen reader announces the page heading instead of the main region. The first render leaves focus alone and the skip link still focuses main. The heading module's comment now describes what the shell does. * fix(workspace): give the Overview nav entry its own home glyph Overview reused the concept's Activity pulse byte for byte, so once the Activity row lands two entries would share one icon. Overview now has an outline home glyph. The shell comparison takes it from the D28 ruling instead of the concept's activity path, and the icon test checks that every approved glyph is distinct. * test(workspace): accept only #249 decision markers and state the lint scope The overlay lint accepted any D-number, so another issue's ruling such as "D5 (#245)" could mark a concept override. A marker now has to be a D-number with no other issue cited; the vocabulary rule that cited #245 reads "#245 decision 5". TESTING.md now states that the lint covers workspace.css only, lists the unmarked overrides still in images.css, and says PRs C and D run the lint over each page sheet they keep. * perf(workspace): re-read only Library and Tags counts after a Library write A confirmed Library or vocabulary write cannot change the Images count, but it re-read all three, including the Images output listing. It now re-reads only the Library and Tags counts. Each count has its own read, so a write never cancels an Images read that is still in flight. |
||
|
Vito
|
6d2213ead5 |
feat(inspect): declarative node support matrix (#250)
* feat(inspect): add a declarative inspection node semantics table
* fix(inspect): bound and isolate the semantics table
Bound the semantics loader: at most 1 MiB is read, containers may nest
at most eight levels, and a RecursionError from the JSON parser becomes
a SemanticsError instead of escaping.
The table is no longer loaded at import. get_semantics() reads it on
first use and caches only a valid result, and the resolver imports it
lazily, only for a profile with semantics on. The default ingestion
profile never imports the module, so a missing or corrupt table cannot
break scan, monitor or admin import. Inspection of a prompt graph with
an unusable table is unresolved with the reason "Inspection node
semantics are unavailable" and an error log, rather than a crash.
INSPECTION_PROFILE now has semantics on; no strategy consumes the table
yet, so resolution is unchanged.
* feat(inspect): resolve guider-based samplers
Under INSPECTION_PROFILE the resolver discovers samplers from the
semantics table and follows SamplerCustomAdvanced through its guider
link (Reroutes allowed) to a listed guider:
- CFGGuider: positive and negative, so the pair resolves.
- BasicGuider: positive only. The state is "absent" with the reason
"Guider has no negative input", the existing missing-negative path.
- Any other guider, including DualCFGGuider (D17), is unsupported-node
and names that guider.
Guider hops draw visits, scan and depth from the existing budgets. A
SamplerCustomAdvanced upstream in latent ancestry is an earlier stage,
so the result stays multistage-ambiguous. Positive and negative
provenance record guider_id. FaceDetailer (detailer-stage) is not a
candidate yet: deciding it needs output ancestry. DEFAULT_PROFILE never
loads the table and is unchanged.
Vector changes (inspection profile only, default vectors unchanged):
- f07b: no-sampler -> resolved (CFGGuider).
- f17: no-sampler -> unsupported-node (FluxGuidance, Task 2.3).
- f01b: no-sampler -> unsupported-node (EmptyFlux2LatentImage latent,
Task 2.5).
- f01: no-sampler -> ambiguous (24 SamplerCustomAdvanced branches).
The no-sampler tests (resolver and inspect route) now use a sampler
class the inspector does not know, because f17 has a supported one.
* feat(inspect): trace conditioning through supported pass-through and selector nodes
* feat(inspect): treat detailers as sampler stages
* fix(inspect): choose selectors that share one condition together
* fix(inspect): bound detailer stage chains by the depth limit
* feat(inspect): support common text encoders and string sources
* fix(inspect): keep pair execution evidence behind unreadable string sources
* feat(inspect): accept any non-sampler latent origin
* fix(inspect): queue each node once in breadth-first ancestry walks
The latent and detailer image walks queued every link before checking
whether its node was already seen, and popped from the list head. A dense
shared fan-in grew the queue far past the visit budget before any visit
was charged. Both walks now use a deque and enqueue each node at most
once, charging every examined edge as scanned work; outcomes are
unchanged.
* fix(inspect): treat unlisted pipe and embed samplers as possible stages
The latent and detailer ancestry walks only flagged unlisted nodes with a
linked latent_image, guider, positive or negative input, so easy-use pipe
samplers, Impact pipe detailers and embed-driven video samplers were walked
through and the final sampler's prompt resolved silently. A separate
stage-shaped input set (adding pipes, embeds and custom-sampler parts)
now makes such nodes unsupported-node, named.
* fix(inspect): walk each sampler's latent ancestry once per resolution
Every selector branch run and candidate re-walked the same latent
ancestry, so conditioning-carrying origins such as WanImageToVideo turned
a three-selector graph from ambiguous into work-limit. The walk outcome is
now cached per sampler; branch runs of one candidate pay for it once and
other candidates are charged its visit cost, as the text memo does. Walks
that ran out of work are not cached. Every link input is still walked.
* fix(inspect): treat unlisted model-driven samplers as possible stages
Unlisted samplers that link a model with conditioning or a latent under
other input names (XlabsSampler, generic video samplers) were still walked
through, so the final sampler's prompt resolved silently. An unlisted node
with a linked model plus conditioning, neg_conditioning, samples or latent
is now unsupported-node, named; model patches such as LoraLoader and
ModelSampling nodes are not.
* feat(inspect): compute facts from the resolved sampler
* fix(inspect): merge facts across sampler branches when ambiguous
* fix(inspect): merge facts over unresolved stages and share stage inputs via the table
* feat(inspect): explain why a prompt could not be resolved
* feat(inspect): port legacy parser rules the new resolver missed (PromptManager)
R1: before 3.2.3 a save patch overwrote every PromptManager node's saved
text with the last-run node's prompt. The legacy viewer recognizes the
signature (comfy-metadata.js createContext: two or more PromptManager
workflow nodes with one API text and different widget values). Inspection
now refuses those nodes as malformed instead of resolving to another
node's prompt; the inspector hands the parsed workflow to the resolver for
this check only. Lands before the new pass-throughs (R6) that would
otherwise make these graphs resolve to the wrong text.
R7: this repository's node classes up to 07a5af3 (PromptManagerV2,
Positive, Negative, Detailer, V2Text, PositiveText, NegativeText) resolve
with their own outputs and their exact strip and ", " join.
The default (ingestion) profile ignores both.
* feat(inspect): port legacy parser rules the new resolver missed (A1111)
R3: an accumulating batch saver repeats the A1111 parameters record once
per batch item, identical except "Batch index: N". The bounded PNG reader
now keeps the last copy (Pillow's rule, which #165 relied on) instead of
calling the file unreadable. Any other difference, including a missing or
second batch index, is still a conflict, and decoding the copies draws from
the duplicate role budget.
R4: parameters text that starts with "Negative prompt:" has an empty
positive (#165), instead of showing the delimiter line as the positive.
R5: the settings footer may be followed by sd-dynamic-prompts' one-line
"Template:" and "Negative Template:" records, and may be "Steps: N" alone
when there is no full footer.
R10: commas inside A1111's quoted settings values no longer split them, so
an "ADetailer prompt" with a comma keeps the other facts known.
The facts' A1111 reader mirrors R4, R5 and R10; the default (ingestion)
profile keeps the historical split. Also from the Task 2.7 review: a guard
test fails on any uncoded unresolved reason without a user line (M1), and
the encoder bounds role lines to the client's 512 code units (M4).
* feat(inspect): port legacy parser rules the new resolver missed (installed nodes)
R6 and R9 for nodes whose sources are installed beside ComfyUI, each
entry's input names and output slots read from the node's code (the task
report lists file and line):
- detailer stages UltimateSDUpscale (image), UltimateSDUpscaleNoUpscale
(upscaled_image) and DetailerForEach (image), judged with their upstream
samplers like FaceDetailer;
- pass-throughs ControlNetInpaintingAliMamaApply and LTXVConditioning
(positive 0, negative 1) and FluxKontextMultiReferenceLatentMethod;
- encoder Text to Conditioning, strings TextInput and DisplayText;
- facts model pass-throughs Lora Loader (LoraManager), Power Lora Loader
(rgthree), ModelPatchTorchSettings, CFGNorm, PerturbedAttentionGuidance.
Impact Pack encodes a detailer's non-empty wildcard instead of its positive
input, so FaceDetailer and DetailerForEach now list it as a prompt
override: a literal wildcard is decided at run time and a linked one names
its source, instead of resolving to the positive input. The overwritten
PromptManager refusal (R1) still holds behind the new pass-throughs. The
default profile does not read the table.
* feat(inspect): port legacy parser rules the new resolver missed (upstream nodes)
R6 and R9 for nodes not installed beside ComfyUI here. Their input names
and output slots come from each pack's source at the commit the saved
workflows record in the node's cnr_id and ver properties (the task report
lists repository, commit, file and line):
- samplers ClownsharKSampler_Beta (RES4LYF), KSampler (Efficient) and
ttN KSampler_v2 (latent input "latent");
- pass-throughs SeedVarianceEnhancer and ApplyInstantIDAdvanced (positive
1, negative 2; output 0 is the model);
- selector Switch conditioning [Crystools];
- encoder smZ CLIPTextEncode: its text when with_SDXL is false; when true
the connected CLIP decides at run time which inputs are read, so the
prompt is known only when text, text_g and text_l agree;
- strings ttN text, CR Text, CR Prompt Text and TextBoxMira;
- facts model pass-through CR Apply LoRA Stack.
Inputs that replace what a sampler reads are not followed: RES4LYF options
(may carry a guider, and with sigmas replace the settings), an Efficiency
script and a ttN XY plot leave the prompt unsupported and the facts
unresolved. The overwritten PromptManager refusal (R1) still holds behind
SeedVarianceEnhancer. The default profile does not read the table.
* test(inspect): cover batch copies past the role budget and orphan widgets
* fix(inspect): match the batch index only in the settings footer
Review I-1: duplicate A1111 parameters copies were compared after blanking
"Batch index: N" anywhere in the record, so copies whose prompts differ
only by that phrase were accepted. The field is now blanked only inside
the record's one "Steps: N, ..." footer line, which must hold it exactly
once; any other difference stays a conflict.
Review M-4: the inspector parses the workflow record only when the API
graph can show the overwritten-PromptManager signature (a PromptManager
class, or a node with PromptManager's search_text input).
* fix(inspect): refuse overwritten PromptManager text inside subgraphs
Controller ruling on review M-1: PromptManager nodes inside subgraphs run
as "<instance>:<inner>" API IDs, nested instances chaining their IDs. The
overwritten-text check now walks subgraph instances (bounded in depth and
nodes) and reads a text widget stored by name, so these nodes are refused
like top-level ones, anchored or not. A definition without an instance
runs nothing and is ignored.
Review M-5: the historical adapters skip an explicit null prepend or append,
as the 07a5af3 code's "if prepend_text:" did.
* test(inspect): import unittest one way in the inspection suites
Code scanning flagged the mixed 'import unittest' and 'from unittest import
mock' forms. Use 'import unittest' plus 'import unittest.mock' everywhere.
* fix(history): name the recorded run's current-file prompts apart from its frozen fields
Now that the inspector resolves more saved files, the Recorded run dialog can
hold two regions named "Positive prompt" (and two of each Copy/Send action):
the frozen run field and the inline current file's prompt. Assistive
technology could not tell them apart, and the real-host chronology test read
two <pre> elements.
Prompt blocks take an optional context label. The inline current file inside
a recorded run names its regions "Current file positive prompt" and its
actions "Copy/Send current file positive prompt"; the visible headings stay
as in the concept. The real-host test now also scopes its frozen-field reads
to the "Frozen run prompt texts" section, and a disposable-server workflow
pins the distinct names with a resolved current file.
* fix(inspect): drop preview-only stages from unanchored candidates
A stage whose outputs reach only non-file outputs (PreviewImage and the other
non_file_outputs) cannot have written a saved file, yet it stayed an
unanchored candidate, so a preview-only FaceDetailer made the saved branch
ambiguous (f01b).
The inspection profile now drops such stages before detailer absorption,
using two linear backward passes over the graph (charged like the consumer
map; a failed pass keeps every stage). A stage without consumers, or one that
also reaches any other terminal, is kept, and nothing is dropped when every
stage is preview-only. Raw plus detailed double saves both write files and
stay ambiguous. A file in the host temp folder may itself be a preview, so it
is inspected with PREVIEW_INSPECTION_PROFILE, which keeps those stages.
Workspace facts follow the same choice: an absent or unresolved result that
names a sampler merges facts across that sampler's stages only, so the
dropped detailer's settings no longer blur the saved file's facts.
f01b now resolves (absent negative, guider has none); its vector is updated
and the expected failure removed. The default profile is unchanged:
differential against
|
||
|
Vito
|
cbf46a7573 |
feat(vocabulary): native Tags & categories screen (#245)
* feat(vocabulary): add workspace vocabulary state * feat(vocabulary): render the native Tags & categories screen * feat(vocabulary): add guarded vocabulary dialogs * fix(vocabulary): recover unconfirmed deletes and list every category in Manage * refactor(vocabulary): use the shared plural helper * test(vocabulary): compare the native screen with the approved concept * fix(vocabulary): wrap long tag names so row actions stay visible on narrow screens * docs(vocabulary): document the native vocabulary screen and gates Also aligns the shell link focus-ring offset with the concept (3px) and makes the chrome comparison poll the document title. * fix(vocabulary): refresh lists when a write lands after its dialog closes A rename, delete, create or category apply that commits after its dialog was disposed (Chromium force-closing the modal on a repeated Escape, or Back while the write is in flight) returned before onInvalidate, so the lists were never re-read and a cached Library shelf kept showing the old names. Like the recipe editor, a disposed command now still reports any outcome that may have changed storage (receipt, conflict, restore, unconfirmed) without rendering; only a failed write stays silent. * fix(vocabulary): give the Manage categories datalist its own id The proposed-name datalist reused the recipe editor's `categories` id. It was safe only because routes dispose each other's dialogs; it is now `vocabulary-category-options`. * docs(vocabulary): correct vocabulary testing notes Name the Tag column and the Create tag heading action, say that a failed Load more moves focus to Retry, place bulk actions on the admin page, describe late writes after a closed dialog, Browse's exact filter and the full deviation list, and use a test port that is not the live concept server's. * test(vocabulary): raise the vocabulary dialog branch floor coverage:update after the late-write and datalist fixes: workspace/vocabulary-dialog.mjs branches 87 -> 88. No floor is lowered. * fix(vocabulary): keep 390px row actions visible regardless of font metrics The one-column Tags table reserved a fixed 6em for the tag name. With CI's stock DejaVu Sans fallback (about 9% wider than the pinned image's) Tag + Prompts + Images + stacked actions needed 351px of a 336px wrap, so Browse and Rename / merge were pushed out of view on every row. At 700px and below the Tag column now has no fixed minimum and the actions ask for no more than their stacked width, so all remaining space goes to the tag name: short names stay on one line wherever the concept's own table fits, and a wider font wraps the name instead of clipping an action. A new test widens the metrics with letter spacing and fails without this change in every engine. * ci: run browser jobs in the pinned Playwright image Concept comparisons measure geometry, which follows the fonts a browser falls back to. The concept names Inter, which neither environment ships: the pinned image falls back to WenQuanYi Zen Hei, a stock ubuntu-latest runner to DejaVu Sans. Under DejaVu the concept's own Tags table needs more than a 390px viewport (its page scrolls sideways and, under touch emulation, the widened layout viewport resizes its dialogs), so the 390px comparisons failed in CI while passing locally. Both browser jobs now run in mcr.microsoft.com/playwright:v1.64.1-noble, the image local runs use, instead of installing browsers on the runner. A tooling test keeps the tag equal to @playwright/test in the lockfile. * fix(vocabulary): ignore a category preview edited while it is pending Editing the Category or proposed name while a slow Preview was in flight was a no-op in the saving phase, so the late response still became an applicable preview: the form showed the new values while Apply would submit the old source and target. An edit during a pending preview now marks it stale. Its late result returns the dialog to idle (Preview again) instead of showing an impact or offering Apply; a plain failure of a stale preview is not shown either, while a restore or conflict still is, since it describes storage. The inputs stay editable during the request, as in the recipe editor, which disables only its actions while saving. * ci: use the image's Python and Node in containerized browser jobs Inside mcr.microsoft.com/playwright:v1.64.1-noble, actions/setup-python failed before any test ran: `spawn /__t/Python/3.12.15/x64/bin/pip ENOENT`. The toolcache builds come from the runner, and their entry points name host interpreter paths that do not exist in the container. The jobs now use the image's Python 3.12 and Node 24. The image has no ensurepip and the job runs as uid 1001 without root, so a checksum-pinned pip wheel bootstraps a user-space venv for requirements-dev.txt; a step checks that the image Node is 24. The tooling test forbids setup-python and setup-node in these jobs and requires the pinned bootstrap. |
||
|
Vito
|
048d599386 |
fix(inspect): bound inspection work, not graph size (#244)
* test(inspect): add synthetic inspection parity fixtures and legacy characterization * test(inspect): pin test-time parity vectors and keep fixtures fully synthetic * fix(inspect): bound resolver work instead of graph size * fix(inspect): bound shared-node and stripped-text work in the inspection profile Keep one memo per resolution whose entries carry their unfolded visit cost; a memo hit charges that cost to the current candidate's allowance only. Cache node validation and charge input keys, stripped characters and copied provenance entries to a whole-resolution work budget before doing the work. The default profile is unchanged. * fix(inspect): keep memoized depth honest across inspection candidates A memo entry now records its height below the reusing depth; a hit raises depth-limit exactly where a fresh walk would, so each candidate's outcome matches its anchored result and does not depend on trace or node order. The default profile is unchanged. * test(inspect): pin memo height propagation Three samplers share one chain, each later one hanging below a memo hit. The third candidate must report depth-limit in both trace orders and when anchored; removing the memo-hit height propagation fails this test. The provenance test now asserts a plain subset. * fix(inspect): tolerate ComfyUI node metadata quirks in projections Projections now take a kind. Each prompt node keeps exactly class_type and inputs; _meta, is_changed and other node keys are validated and dropped, so "is_changed": [NaN] no longer marks the whole prompt graph malformed. A nonfinite value inside inputs, anywhere in a workflow, or in a retained carrier member projects to null and is never reported as a number. The carrier applies the prompt/workflow kinds to its members. Exact numbers are unchanged (Decimal spelling, unsafe integers as strings) and duplicate keys are still malformed. The 500-node gate is replaced by a 20,000-node backstop (workflow count includes subgraph definitions). Raw records are untouched. The f14 inspection vector's facts become known; default vectors are unchanged. * fix(inspect): budget metadata per record so large workflows never hide prompts PNG inspection no longer counts every text chunk against one shared 2 MiB budget. Role records (prompt, parameters, the pair execution record) keep a 2 MiB budget together, encoded and decoded, and exceeding it still fails the whole read. A workflow has its own 4 MiB budget: a chunk over it is skipped by seek, and a compressed one stops inflating at budget + 1. Only the workflow is then reported as limited (record format "limited", no raw text, workflow_graph limited); prompts, facts and the prompt graph are unaffected. Each text chunk's keyword is read first (at most 80 bytes). Chunks that are not retained are skipped by length without being read or checksummed, so memory stays bounded. Byte-identical duplicates of a retained record are accepted and do not consume budget; differing duplicates still raise "Duplicate prompt metadata", and a duplicate of a limited workflow stays limited. The chunk-count limit is unchanged. InspectionRead gains limited_records (empty by default). The reader is only used by the inspection routes, so ingestion, scan and import are unchanged. Vectors: f04-inspection (2.5 MB workflow, within the new workflow budget) and f15-inspection (identical duplicate chunks) now read and resolve, with the same outcome and facts as f05-inspection. Default vectors are unchanged. * fix(inspect): keep prompt evidence longest under the response budget * fix(inspect): bound identical duplicate chunk reads * fix(inspect): fail closed when role duplicates exceed their budget * fix(inspect): use the bounded inspection profile end to end Inspection routes resolve with INSPECTION_PROFILE and expose reason_code and node on the resolution; scan, live monitor and admin import keep the default profile (pinned by spies over the real resolver on f03). JS facts drop the entries and workflow node-count gates; per-lookup visit sets and the server's node ceiling bound the work. The validator accepts the textless `limited` workflow format, follows the workflow-first response omission order, and checks the closed reason-code vocabulary. The file inspector labels limited records and disables their workflow download. vectors.json: 12 inspection vectors gain their reason codes; f03 facts become known and f01 facts ambiguous. Default vectors are unchanged. A new parity test asserts vectors.json facts through the workspace JS. * chore(tools): add read-only inspection corpus tool tools/inspection_corpus.py runs the inspection route pipeline and the workspace JS facts of a chosen code tree over a media folder, read-only, and reports the #240 invariants H1 to H8 with aggregate counts. Rows hold statuses and SHA-256 digests of resolved role texts, never file names or prompt text unless --with-paths is given. Outputs inside the root or a code tree are refused. The facts-over-vectors test now fails instead of skipping when CI is set and Node.js is missing. * docs(testing): document bounded inspection work * fix(tools): fail the corpus run when facts or inspection did not run Rows whose facts were never computed (no or exiting Node.js) now fail H3, and a new harness line fails on any tool exception or missing facts, so a run where nothing was measured can no longer exit 0. Unreadable files stay inspector outcomes. A missing --node binary is refused, an exited harness is reaped, H8 has a 50 ms floor for tiny baselines, and JSONL rows are sorted by id. * docs(inspect): correct ceiling wording and bandit annotations Describe the two 20,000-node ceilings (prompt entries, workflow UI plus subgraph nodes) in TESTING.md, and use bare nosec ids so Bandit stops warning about unparsed test names. * test(inspect): make parity observation tuples explicit |
||
|
Vito
|
44b6ed2420 |
fix(library): editor follow-ups after storage restore and history selection parity (#243)
* fix(library): close recipe editor follow-ups from the native editor slice - After restored storage, Create text revision and Archive are disabled so they cannot re-read an old numeric ID; only Reload Library remains. - The storage-changed exit in Edit, revision and Add negative states that Reload Library closes the dialog and discards the entries (the concept has no discard confirmation, so the copy stays inline). - When Save becomes disabled after an unconfirmed write or a conflict, focus moves to the recovery action instead of falling to the body; the archive confirmation does the same. - A reuse toast only says the entered parent metadata was not applied when the controller found it differs from the stored metadata. - Prompt history opens on its first negative variant, as the concept does, so the heading Send starts enabled. - "1 linked image" is singular on cards, variant lanes and the embedded gallery count. * fix(library): treat a blank category as equal to a stored uncategorized one A reuse that left the category blank sent "Uncategorized" and compared it with the stored NULL, so the toast claimed the entered metadata was not applied. Both sides now normalize blank and "Uncategorized" the same way before comparing; a genuinely different category still discloses it. * test(coverage): raise frontend coverage floors after editor follow-ups * fix(library): singular counts for one item and honest discard copy - One shared countOf/noun helper (web/js/workspace/plural.mjs) now words linked images, saved negative variants (card chip and history count), distinct recorded runs and the Images toolbar count in the singular for exactly one; every other count keeps its existing wording. - The restored-storage status says "Leaving this dialog discards your entries." because Cancel, the close button and Escape discard the draft too, not only Reload Library. - The new helper gets its coverage floor; no other floor changes. * fix(library): open every prompt history visit on its first negative The concept resets to the first negative variant on every navigation to a prompt (navigate: state.variant = 0) and selects another pair only right after a save names it. The history no longer remembers a clicked variant or an explicit All images choice across visits: the per-visit memory is replaced by a one-shot saved selection that the next history mount (or the same visit's reconciliation) consumes, and a verified pair outside the loaded page is kept only for that saved selection. Within a visit, clicks and All images behave as before. |
||
|
Vito
|
8bcde4fbe4 |
feat(library): native recipe editor UI, pair archive browsing and export (#235)
* feat(library): manage native editor drafts and recovery * fix(library): fence pair archive retries against restored storage * feat(library): add native recipe editor dialogs * fix(library): read archive counts through the editor controller * feat(library): reconcile editor saves and archived pairs Wire the concept's heading actions (Library Export and + New prompt, Images New prompt, history ← Prompt library, Edit metadata and pair Send to ComfyUI) and the Negative variants + Add negative and Show archived controls. Saves navigate or reconcile in place through createLibraryDetail.accept, invalidate cached shelf state by write generation, browse and restore archived pairs, and offer an explicit Library reload when storage was restored. * fix(library): refresh archived pairs and align editor outcomes * test(library): enforce approved native editor presentation * test(library): verify editor host and coverage compatibility Adds the rejected connected-target host assertion, pins the stock host listing at 80 cases, documents the native editor, and keeps Save/Archive focus after a failed write. * docs(testing): correct host case totals and cover archive focus * fix(library): fence editor reloads after restore and settle outcome copy |
||
|
Vito
|
ecd21165a7 |
feat(history): add chronological runs and exact output inspection (#227)
* feat(history): add bounded chronological read projections (#209) * fix(history): validate internal continuation positions (#209) * feat(history): expose fenced history windows and run details (#209) * fix(history): release retired projection connections (#209) * feat(history): resolve reported outputs through current authorization (#209) * fix(history): reject invalid inspection targets (#209) * feat(history): add scoped history state and current-file adapter (#209) * fix(history): preserve slideshow and clear stale reentry actions (#209) * feat(history): render recorded executions and frozen run details (#209) * fix(history): recover receipts and refresh capture evidence (#209) * test(history): verify chronological history across restore and host modes (#209) * fix(history): enforce chronological marker visual parity (#209) * fix(history): resolve final chronological review findings Address #209 recovery, bounded visit restoration, exact receipt availability, and portable regression coverage. * test(history): repair Windows fixtures and review feedback Address #209 and PR #227 native path, cleanup, media and review-comment expectations. Document Windows portability preflight without changing production behavior. * ci: raise the viewerjs job budget for the larger browser suite The cross-browser workflows suite grew from 396 to 496 tests on this branch, which pushed the whole viewerjs job to about 25.5 minutes against the 25 minute cap set in #181. Two exact-head runs on this branch timed out without any test failing: run 39173019283 was killed on test 474 of 496, and run 39175125474 printed "496 passed (12.8m)" and was then cancelled during Playwright shutdown. Raise only the job budget. Browser projects, workers and per-test timeouts are unchanged. Splitting the browsers into parallel jobs is tracked separately. |
||
|
Vito
|
d9537a726c |
feat(workspace): complete shared inspector and collection viewer (#224)
* feat(inspector): expose bounded physical file evidence * fix(inspector): distinguish ambiguous saved associations * feat(inspector): derive conservative generation facts * fix(inspector): guard fact ancestry and inspection state * feat(inspector): share complete file details and exports * fix(inspector): preserve fact states and touch targets * feat(viewer): navigate the loaded media collection Refs #216 * fix(viewer): refit after current stage geometry changes Ref #216. Observe the current media stage after readiness and wrapped title changes without rebuilding focused controls or resetting transforms at unchanged dimensions. * feat(viewer): add lifecycle-safe slideshow and media preferences * fix(viewer): resume gallery continuation after close (#216) * fix(images): guard source recovery and wrap viewer actions Clear stale root and folder intent, cancel old pages, and wait for current source discovery before loading a refreshed collection. Preserve safe retry through failed, superseded, and disposed discovery. Wrap narrow viewer footer actions and wait for measured gallery viewport settling in responsive checks. Refs #216; addresses PR #224 review. * test(viewer): await gallery layout after viewport changes Require actual inner, root client, and document widths to agree after each responsive-case viewport and CSS zoom transition. Keep the existing exact frame, overflow, focus, and coarse target assertions unchanged. Observed PR #224 CI initial mobile resize at537px before pending card relayout settled to356px. Refs #216. |
||
|
Vito
|
e7cfcc2bfb |
style(workspace): align browsing with the approved concept (#219)
* style(workspace): align approved shell and visual fixtures * test(workflows): preserve evidence across browser projects * style(workspace): match approved image browsing geometry * style(workspace): match natural library card layout * fix(workspace): retain wheel motion during row correction * fix(workspace): contain zoomed controls and image metadata (#215) |
||
|
Vito
|
4ef236aaf7 |
feat(history): persist exact run output references (#214)
* feat(history): define bounded output reference contracts * feat(database): migrate execution output evidence to schema v3 * feat(history): persist immutable run output references * test(history): isolate mocked node gallery monitor * feat(history): capture bounded output descriptors with shared leases * fix(history): authenticate payload owners and release failed captures * feat(history): attach output evidence to exact finalized attempts * test(history): verify run output evidence on real ComfyUI * fix(history): release idle worker payload references * docs(history): clarify defensive lease cleanup * test(history): align output fixtures with native path styles * test(history): separate restore completion from writer drain * test(history): bound batch drains by progress and total time |
||
|
Vito
|
763e6b37b1 |
feat(history): record durable ComfyUI execution attempts (#212)
* feat(history): normalize bounded execution evidence (#209) * fix(history): bound lifecycle kind checks before hashing (#209) * feat(history): persist execution attempts with restore fencing (#209) * test(api): bootstrap standalone backup restore fixtures (#209) * feat(history): isolate bounded asynchronous ledger writes (#209) * feat(history): observe actual queue attempts without altering execution (#209) * fix(database): honor package-scoped configuration (#211) * test(history): exercise real cached and headless executions (#209) * fix(history): reject unsupported uniqueness and isolate package fixtures (#209) * test(history): support Python 3.10 package fixture cleanup (#209) |
||
|
Vito
|
fdba6fd012 |
feat(workspace): group saved negatives in the native Prompt Library (#210)
* feat(workspace): group saved negative variants in native library (#208) * fix(library): preserve full name order and batch previews (#208) |
||
|
Vito
|
dc345671ae |
feat(workspace): inspect and send positive and negative prompts (#206)
* feat(workspace): inspect and send positive and negative prompts * docs(workspace): capture complete inspector and viewer previews * docs(inspector): explain the subprocess cleanup race * fix(workspace): defer observed gallery layout writes (#207) * fix(inspector): keep path-only prompt associations unverified |
||
|
Vito
|
76e9b51079 |
feat(bridge): add acknowledged ComfyUI prompt destinations (#203)
* feat(bridge): add guarded PromptManager prompt destinations * fix(ci): install shared contracts before frontend unit tests * test(comfyui): wait for paired editor resize before measuring layout |
||
|
Vito
|
590aa2cd0e |
feat(workspace): add native Images browsing and infinite scroll (#201)
* feat(workspace): add native image browsing and continuous loading * test(workspace): assert empty collections through their status * fix(workspace): rescan refreshed images and expose ancestor folders |
||
|
Vito
|
d4bb5c5ba9 |
feat(ui): add the tested opt-in Prompt Manager workspace shell (#198)
* docs(ui): prototype unified prompt management application * docs(ui): add masonry and per-image tagging to application concept * docs(ui): make gallery concept use continuous infinite scrolling * feat(ui): introduce the tested application workspace shell * fix(docs): preserve concept controls across cached navigation * test(ci): emit Python tracebacks for native test crashes * test(ui): cover workspace restoration across cached navigation |
||
|
Vito
|
caa9649f32 |
feat: reuse positive and negative prompt combinations (#195)
* feat(db): add pair schema and stage restore migrations for #193 * feat(database): persist reusable ordered prompt pairs (#193) * feat(api): expose reusable pairs and atomic metadata enrichment (#193) * feat(metadata): resolve canonical prompt pairs with bounded provenance (#193) * feat(scan): enrich image pairs without guessing or duplicate links (#193) * fix(database): preserve pair tags during global maintenance (#193) * feat(tracking): enrich live image pairs and cancel scans safely (#193) * feat(nodes): encode paired prompts and count cached recipe runs (#193) * fix(database): validate restored pair ownership and provenance (#193) * feat(admin): report pair scan outcomes and cancellation (#193) * feat(ui): add paired prompt editor and explicit recipe library for #193 * fix(autocomplete): include reusable pair metadata vocabulary (#193) * fix(pairs): honor recent sorting and conservative scan outcomes (#193) * fix(ui): protect paired draft saves and clarify negative variants (#193) * fix(metadata): preserve bounded paired execution evidence (#193) * fix(tracking): follow actual pair output roles and prefer execution evidence (#193) * docs(pairs): document live validation and retain renderer screenshots (#193) * test(api): inject disposable databases before API startup (#194) * test(api): canonicalize portable temporary gallery roots (#194) * docs(ui): prototype branching negative variant history (#193) * docs(ui): show selected negative beneath positive in timeline concept (#193) * docs: retain approved timeline for later gallery redesign (#193) * test(db): close restore fixture connections before cleanup (#194) * test(db): reuse existing handle guards in all pair fixtures (#194) * chore: clarify rollback test and intentional exception handling (#193) |
||
|
Vito
|
a52ff4e052 |
feat(ui): add Focused Prompt Manager with shared autocomplete (#191)
* feat(ui): add Focused Prompt Manager node (#186) * feat(ui): autocomplete saved Focused metadata with shared controls (#186) * feat(ui): autocomplete Focused library filters (#186) |
||
|
Vito
|
035e816db6 |
feat(ui): adopt shared toolkit for Prompt Manager Classic (#190)
* feat(ui): adopt shared toolkit for Prompt Manager Classic (#186) * test(ui): retain Text node Web UI coverage alongside Classic * fix(tooling): reject lookalike toolkit download URLs (#186) |
||
|
Vito
|
f98f6fa08d |
test(ci): validate shared toolkit in real PromptManager hosts (#189)
* test(ci): prove shared toolkit with real PromptManager host coverage * test(ci): match KikoTools Python 3.13 compatibility coverage |
||
|
Vito
|
5ded3189c1 | test: cover backup restore and destructive browser workflows (#185) | ||
|
Vito
|
f1b1d4731b | test: exercise real page workflows and enforce frontend coverage (#181) | ||
|
Vito
|
e9fe586442 |
fix: repair prompt edit hashes, auto-tag review, and stale UI responses (#180)
* fix: keep edited prompt hashes consistent Fixes #176 * fix: align gallery auto-tag review with scoped image APIs Fixes #177 * fix: keep Tags prompt results on the current filter Fixes #178 * fix: ignore stale metadata in admin image viewers Fixes #179 * test: compare canonical gallery paths on macOS |
||
|
Vito
|
6d9f3fc8fb |
fix: preserve gallery image identity and ignore stale metadata (#175)
* fix: preserve gallery root identity across media and metadata Fixes #173 * fix: ignore stale gallery metadata responses Fixes #174 * test: use platform-valid gallery filenames on Windows |
||
|
Vito
|
cf0cef3f25 |
feat: vendor Viewer.js reproducibly and automate release updates (#170)
Refs #169. Pin and verify pristine distribution assets, upgrade to 1.15.2, and add tested maintainer tooling plus desktop and touch browser checks. |