diff --git a/README-en.md b/README-CN.md similarity index 71% rename from README-en.md rename to README-CN.md index 2afab20..cd9f84a 100644 --- a/README-en.md +++ b/README-CN.md @@ -1,14 +1,14 @@ -[中文](README.md) | English +中文 | [English](README.md) -# A Text To Speech node using Step-Audio-TTS in ComfyUI. Can speak, rap, sing, or clone voice. +# Step-Audio-TTS 的 ComfyUI 节点, 文本转语音, 可说话, 唱歌, RAP, 或者克隆声音. ![](https://github.com/billwuhao/ComfyUI_StepAudioTTS/blob/master/assets/2025-02-21_05-34-25.png) -## Update +## 更新 -[2025-03-07]⚒️: Custom speakers can be defined directly in `ComfyUI\models\TTS\Step-Audio-speakers\speakers_info.json` without the need for input in the node. +[2025-03-07]⚒️: 自定义说话者直接在 `ComfyUI\models\TTS\Step-Audio-speakers\speakers_info.json` 中定义, 无需节点中输入. -Move the `Step-Audio-speakers` folder from this repository to the `ComfyUI\models\TTS` folder. The structure is as follows: +请将本仓库中 `Step-Audio-speakers` 文件夹移动到 `ComfyUI\models\TTS` 文件夹中, 结构如下: ``` ComfyUI\models\TTS @@ -17,11 +17,11 @@ ComfyUI\models\TTS ├── Step-Audio-TTS-3B ``` -You can then freely customize speakers under the `ComfyUI\models\TTS\Step-Audio-speakers` folder for use. Ensure that the speaker name configuration matches exactly: +然后就可在 `ComfyUI\models\TTS\Step-Audio-speakers` 文件夹下随意自定义说话者即可使用. 注意说话者名称配置一定要一致: ![](https://github.com/billwuhao/ComfyUI_SparkTTS/blob/master/images/2025-03-07_03-30-51.png) -[2025-03-06]⚒️: New recording node `MW Audio Recorder` can be used to record audio with a microphone, and the progress bar displays the recording progress: +[2025-03-06]⚒️: 新增录音节点 `MW Audio Recorder` 可用麦克风录制音频, 进度条显示录制进度: ![](https://github.com/billwuhao/ComfyUI_StepAudioTTS/blob/master/assets/2025-03-06_21-29-09.png) @@ -34,11 +34,11 @@ You can then freely customize speakers under the `ComfyUI\models\TTS\Step-Audio- | **smooth** | 时频平滑系数（值越高越自然）
Time-frequency smoothing (higher=more natural) | 1,3,5,7,9,11 (奇数/odd numbers) | 建议语音：5，音乐：7
Recommended: 5 for speech, 7 for music | | **sample_rate** | 采样率（影响音质与文件大小）
Sampling rate (affects quality & size) | 16000/44100/48000 Hz | 44100=CD音质
44100=CD quality | -[2025-03-02]⚒️: Add experimental `custom_mark`, surrounding with "()", for example `(温柔)(东北话)`, it may have an effect. +[2025-03-02]⚒️: 增加实验性的 `custom_mark`, 用 "()" 包围例如 `(温柔)(东北话)`, 它可能会有效. -[2025-02-25]⚒️: Support custom speaker `custom_stpeaker`. +[2025-02-25]⚒️: 支持自定义说话者 `custom_speaker`. -## Installation +## 安装 ``` cd ComfyUI/custom_nodes @@ -50,31 +50,30 @@ pip install -r requirements.txt ./python_embeded/python.exe -m pip install -r requirements.txt ``` -## Model Download +## 模型下载 -Download to the `ComfyUI\models\TTS` folder +下载到 `ComfyUI\models\TTS` 文件夹中. ### Huggingface -| Models | Links | +| 模型 | 链接 | |-------|-------| | Step-Audio-Tokenizer | [🤗huggingface](https://huggingface.co/stepfun-ai/Step-Audio-Tokenizer) | | Step-Audio-TTS-3B | [🤗huggingface](https://huggingface.co/stepfun-ai/Step-Audio-TTS-3B) | ### Modelscope -| Models | Links | +| 模型 | 链接 | |-------|-------| | Step-Audio-Tokenizer | [modelscope](https://modelscope.cn/models/stepfun-ai/Step-Audio-Tokenizer) | | Step-Audio-TTS-3B | [modelscope](https://modelscope.cn/models/stepfun-ai/Step-Audio-TTS-3B) | +## 支持 中文, 英文, 韩语, 日语, 四川话, 粤语等 -## Supports Chinese, English, Korean, Japanese, Sichuanese, Cantonese etc. +## 致谢 -## Acknowledgements - -Part of the code for this project comes from: +本项目的部分代码来自： * [Step-Audio](https://github.com/stepfun-ai/Step-Audio) * [CosyVoice](https://github.com/FunAudioLLM/CosyVoice) * [transformers](https://github.com/huggingface/transformers) * [FunASR](https://github.com/modelscope/FunASR) -Thank you to all the open-source projects for their contributions to this project! \ No newline at end of file +感谢以上所有开源项目对本项目开源做出的贡献！ \ No newline at end of file diff --git a/README.md b/README.md index 0825c4f..ffe1592 100644 --- a/README.md +++ b/README.md @@ -1,14 +1,14 @@ -中文 | [English](README-en.md) +[中文](README-CN.md) | English -# Step-Audio-TTS 的 ComfyUI 节点, 文本转语音, 可说话, 唱歌, RAP, 或者克隆声音. +# A Text To Speech node using Step-Audio-TTS in ComfyUI. Can speak, rap, sing, or clone voice. ![](https://github.com/billwuhao/ComfyUI_StepAudioTTS/blob/master/assets/2025-02-21_05-34-25.png) -## 更新 +## Update -[2025-03-07]⚒️: 自定义说话者直接在 `ComfyUI\models\TTS\Step-Audio-speakers\speakers_info.json` 中定义, 无需节点中输入. +[2025-03-07]⚒️: Custom speakers can be defined directly in `ComfyUI\models\TTS\Step-Audio-speakers\speakers_info.json` without the need for input in the node. -请将本仓库中 `Step-Audio-speakers` 文件夹移动到 `ComfyUI\models\TTS` 文件夹中, 结构如下: +Move the `Step-Audio-speakers` folder from this repository to the `ComfyUI\models\TTS` folder. The structure is as follows: ``` ComfyUI\models\TTS @@ -17,11 +17,11 @@ ComfyUI\models\TTS ├── Step-Audio-TTS-3B ``` -然后就可在 `ComfyUI\models\TTS\Step-Audio-speakers` 文件夹下随意自定义说话者即可使用. 注意说话者名称配置一定要一致: +You can then freely customize speakers under the `ComfyUI\models\TTS\Step-Audio-speakers` folder for use. Ensure that the speaker name configuration matches exactly: ![](https://github.com/billwuhao/ComfyUI_SparkTTS/blob/master/images/2025-03-07_03-30-51.png) -[2025-03-06]⚒️: 新增录音节点 `MW Audio Recorder` 可用麦克风录制音频, 进度条显示录制进度: +[2025-03-06]⚒️: New recording node `MW Audio Recorder` can be used to record audio with a microphone, and the progress bar displays the recording progress: ![](https://github.com/billwuhao/ComfyUI_StepAudioTTS/blob/master/assets/2025-03-06_21-29-09.png) @@ -34,11 +34,11 @@ ComfyUI\models\TTS | **smooth** | 时频平滑系数（值越高越自然）
Time-frequency smoothing (higher=more natural) | 1,3,5,7,9,11 (奇数/odd numbers) | 建议语音：5，音乐：7
Recommended: 5 for speech, 7 for music | | **sample_rate** | 采样率（影响音质与文件大小）
Sampling rate (affects quality & size) | 16000/44100/48000 Hz | 44100=CD音质
44100=CD quality | -[2025-03-02]⚒️: 增加实验性的 `custom_mark`, 用 "()" 包围例如 `(温柔)(东北话)`, 它可能会有效. +[2025-03-02]⚒️: Add experimental `custom_mark`, surrounding with "()", for example `(温柔)(东北话)`, it may have an effect. -[2025-02-25]⚒️: 支持自定义说话者 `custom_speaker`. +[2025-02-25]⚒️: Support custom speaker `custom_stpeaker`. -## 安装 +## Installation ``` cd ComfyUI/custom_nodes @@ -50,30 +50,31 @@ pip install -r requirements.txt ./python_embeded/python.exe -m pip install -r requirements.txt ``` -## 模型下载 +## Model Download -下载到 `ComfyUI\models\TTS` 文件夹中. +Download to the `ComfyUI\models\TTS` folder ### Huggingface -| 模型 | 链接 | +| Models | Links | |-------|-------| | Step-Audio-Tokenizer | [🤗huggingface](https://huggingface.co/stepfun-ai/Step-Audio-Tokenizer) | | Step-Audio-TTS-3B | [🤗huggingface](https://huggingface.co/stepfun-ai/Step-Audio-TTS-3B) | ### Modelscope -| 模型 | 链接 | +| Models | Links | |-------|-------| | Step-Audio-Tokenizer | [modelscope](https://modelscope.cn/models/stepfun-ai/Step-Audio-Tokenizer) | | Step-Audio-TTS-3B | [modelscope](https://modelscope.cn/models/stepfun-ai/Step-Audio-TTS-3B) | -## 支持 中文, 英文, 韩语, 日语, 四川话, 粤语等 -## 致谢 +## Supports Chinese, English, Korean, Japanese, Sichuanese, Cantonese etc. -本项目的部分代码来自： +## Acknowledgements + +Part of the code for this project comes from: * [Step-Audio](https://github.com/stepfun-ai/Step-Audio) * [CosyVoice](https://github.com/FunAudioLLM/CosyVoice) * [transformers](https://github.com/huggingface/transformers) * [FunASR](https://github.com/modelscope/FunASR) -感谢以上所有开源项目对本项目开源做出的贡献！ \ No newline at end of file +Thank you to all the open-source projects for their contributions to this project! \ No newline at end of file