test(comfyui): a workflow of ComfyUI's own nodes creates and links its prompt (#247)

The real-host attribution spec gains the foreign case (CLIPTextEncode,
KSampler, SaveImage): its prompt is created and linked at settle and a
second run links to the same prompt. The fixture route lists the waiting
foreign files. TESTING.md records the monitor's foreign path and D147.

TESTING.md

@@ -2555,7 +2555,8 @@ until this browser dismissed the 3.2.0 update notice (`pm_update_notice_dismisse
 the legacy admin page's key); Later dismisses it without scanning, and Review scan
 dismisses it as the legacy Scan does. "+ Add source" asks validate-source, then adds
 the folder to the host draft of `gallery_root_paths`; Remove takes one out; "Watch for
-new outputs" (`monitoring_enabled`) and Worker threads (`worker_threads`) are host
+new outputs" (`monitoring_enabled`), "Save prompts from other workflows"
+(`save_foreign_runs`, D147) and Worker threads (`worker_threads`) are host
 drafts too, and Save writes them with the revision. A save the server refuses because a
 scan runs toasts "Another job is running: <title>." with a link to that job (D57) and
 keeps the drafts; a save refused for one source says the server's message as the status
@@ -2804,7 +2805,7 @@ the connection's `total_changes` is 0 at close and the data reads back unchanged
 `-shm` bytes are not compared: every WAL reader rewrites its read marks there, so no
 reader can keep it byte-identical (`test_health_check_never_writes`).
 
-Recorded deviations (plan D60–D75, D79–D82 renumbered D92–D107, D109–D110 and D111–D114; D121–D134 assigned). D94,
+Recorded deviations (plan D60–D75, D79–D82 renumbered D92–D107, D109–D110 and D111–D114; D121–D134 and D147 assigned). D94,
 the per-section hand-off panel, was retired by S12 (#329): every section is native.
 
 - **D92** (shell): no "Sample configuration" chip. The Save status is truthful: "No
@@ -3179,6 +3180,21 @@ the per-section hand-off panel, was retired by S12 (#329): every section is nati
   `Watch for new outputs saves monitoring_enabled; a restart applies it` and `a save
   refused for one unusable source names it and marks its row`
   (workspace-system-sources.spec) and the system-state and system-sources node tests.
+- **D147** (Sources, #247 D-Q4): the concept has no switch for prompts from workflows
+  without a PromptManager node; the maintainer chose a visible switch over a config key.
+  A `.setting-row` in the concept's toggle markup follows "Watch for new outputs":
+  "Save prompts from other workflows" (`#foreign-runs`, host key `save_foreign_runs`,
+  config.json `gallery.monitoring.save_foreign_runs`, default on), "New outputs of
+  workflows without a PromptManager node add their prompt to the library when it is
+  certain.". It is saved with the revision like the other host rows and applied at once
+  (the monitor reads it for every file), so a save names no restart. While "Watch for
+  new outputs" is drafted off the switch is disabled and a `p.small` under the
+  description says "Applies while Watch for new outputs is on." (the value is kept).
+  Pinned by `sources matches the concept` (the mapping inserts the row after the
+  monitoring row), `sources comparison detects mutations` (a missing row and a changed
+  label are caught), `D147: Save prompts from other workflows saves save_foreign_runs
+  live; off while monitoring is off (#247)` (workspace-system-sources.spec: keyboard on
+  desktop, a tap on touch) and the system-sources node test.
 - **D129** (library location, S6b): the concept shows neither where the library lives
   nor a way to move it. System › Overview's "Library health" gains a "Library location"
   `.operation` row after Backup status, in that row's own markup: "<path> · <why>",
@@ -5084,6 +5100,57 @@ Tests: `tests/test_file_prompt.py` (one test per ladder step and junk class),
 saver, a legacy-linked file left as it is, `_BatchHistory.recorded`) and
 `tests/test_recorded_saver_anchor.py` `TestInspectionResolution`.
 
+**In the monitor.** An output whose workflow has no positive PromptManager node
+(`_find_prompt_from_metadata` says `foreign`) used to be logged and skipped. It now
+goes through the same ladder with the `MONITOR` policy (`utils/foreign_runs.py`, the
+handler's `_ingest_foreign`, `_recheck_foreign`, `_store_foreign`):
+
+- **At settle.** The ladder runs without history. Certain (`pair` or `positive`): the
+  prompt is stored and the file linked at once. `history` (an undecided graph inside
+  ComfyUI's output folder): the file is registered in its own waiting set, then the
+  ladder runs again at once with the file's recorded output, because the run may have
+  been sealed before the file settled; certain then means stored, otherwise it keeps
+  waiting. Anything else is logged "No certain prompt for <file>; left unlinked".
+- **After the run ends.** When the run's outputs are sealed, each waiting foreign file
+  gets one re-check (`ForeignRecheck(reference)`) with the sealed output reference,
+  so history is asked with the spelling it recorded (a Windows folder whose case
+  differs from the disk still links). Not certain: "No certain prompt for <file>
+  after its run ended; left unlinked". An ambiguous inspector answer is never given
+  the legacy floor in the monitor (D-Q3); an untraceable one still is.
+- **Waiting sets.** `_awaiting_foreign` and `_foreign_due` sit beside the keyless sets
+  with the same bounds (1000 files, one hour) but are separate, so a large foreign run
+  never evicts a waiting keyless file. An expired or evicted entry is logged "No
+  recorded run for <file>; left unlinked". `awaiting_foreign()` lists them;
+  `shutdown()` and `close()` clear them, and a closed handler re-checks nothing.
+- **Store.** One write through `survive_switch` (rerun after a Move library): a pair
+  through `ingest_resolved_pair(..., marks=RUN_MARKS)`, a positive through
+  `store_scanned_prompt_or_raise(..., RUN_MARKS)`. A created prompt carries category
+  `scanned`, tag `auto-scanned` and the note `Saved from a workflow run: <file>`; a
+  file linked to another prompt is `conflict` and keeps its link. Logged at info
+  "Foreign run: <status> prompt <id> for <file> (<source>)"; a failure is logged and
+  the file stays unlinked.
+- **Never.** No tracker FIFO entry is read or consumed, nothing is counted (run count
+  stays 0, no `last_used_at`), and nothing is queued for Needs review.
+- **The setting.** `GalleryConfig.SAVE_FOREIGN_RUNS` (`gallery.monitoring.
+  save_foreign_runs`, default true, only a bool applies) is read for every file, at
+  settle and at the re-check; off logs "No PromptManager prompt in workflow, skipping
+  image" as before. System › Sources & scans "Save prompts from other workflows" (D147)
+  saves it through `POST /prompt_manager/settings` with no restart field; the
+  diagnostics report lists it.
+
+Tests: `tests/test_run_attribution.py` `TestMonitorForeignRuns` (dataset branches
+linked after the seal, a seal before settle, a name two runs reported, the setting
+off at settle and at the re-check, a plain workflow linked at settle with no run
+count and the tracker queue untouched, the sealed reference's spelling, the separate
+bound, expiry, a seal while the pending set is full, shutdown, a failed store),
+`tests/test_image_linking.py` `TestForeignWorkflows`, `tests/test_image_monitor_singleton.py`
+(close drops a foreign re-check), `tests/test_config.py`,
+`tests/test_settings_sources.py` `TestSaveForeignRunsSetting`, and the real-host
+`tests/comfyui/image-attribution.spec.mjs` case "an output of a workflow without a
+PromptManager node creates and links its prompt; a second run reuses it" (ComfyUI's
+own `CLIPTextEncode`, `KSampler` and `SaveImage`; the fixture route's GET also lists
+`foreign`, the waiting foreign files).
+
 ## Linked prompt text (#343)
 
 A link drives `text` on every PromptManager node, and `negative_text` on the Pair,

tests/comfyui/fixtures/ledger_nodes.py

@@ -301,8 +301,15 @@ async def image_monitor(request: web.Request) -> web.Response:
 
 @PromptServer.instance.routes.get("/pm_execution_fixture/monitor")
 async def image_monitor_state(request: web.Request) -> web.Response:
-    """File names of keyless images waiting for their run's recorded outputs."""
+    """File names of images waiting for their run's recorded outputs: keyless
+    ones (``awaiting``) and foreign ones (``foreign``, #247)."""
     monitor = _plugin_module("utils.image_monitor")._monitor_instance
     handler = getattr(monitor, "handler", None)
     waiting = handler.awaiting_history() if handler is not None else []
-    return web.json_response({"awaiting": [os.path.basename(p) for p in waiting]})
+    foreign = handler.awaiting_foreign() if handler is not None else []
+    return web.json_response(
+        {
+            "awaiting": [os.path.basename(p) for p in waiting],
+            "foreign": [os.path.basename(p) for p in foreign],
+        }
+    )

tests/comfyui/image-attribution.spec.mjs

@@ -1,6 +1,7 @@
 // #342 on the real pinned host: the image monitor links an output only to a prompt
 // that provably produced it. An unknown node (PMHistoryCached) stands in for the
-// maintainer's LLM; KSampler is the fixture's deterministic stand-in.
+// maintainer's LLM; KSampler is the fixture's deterministic stand-in. #247: an output
+// of a workflow without a PromptManager node gets its own prompt.
 import { randomUUID } from 'node:crypto';
 import { execFile } from 'node:child_process';
 import { promisify } from 'node:util';
@@ -140,3 +141,30 @@ test('an output saved without metadata links once its recorded run names a store
         expect((await request.post('/pm_execution_fixture/metadata', { data: { disabled: false } })).ok()).toBe(true);
     }
 });
+
+// #247: no PromptManager node at all, only ComfyUI's own text encoders, sampler and
+// saver (the fixture's inputs and decoder stand in for the model files).
+function foreignGraph({ text, seed = 1, prefix }) {
+    return {
+        '10': { class_type: 'PMHistoryInputs', inputs: {} },
+        '20': { class_type: 'CLIPTextEncode', inputs: { text, clip: ['10', 0] } },
+        '30': { class_type: 'CLIPTextEncode', inputs: { text: '', clip: ['10', 0] } },
+        '40': { class_type: 'KSampler', inputs: { model: ['10', 1], latent_image: ['10', 2], positive: ['20', 0],
+            negative: ['30', 0], seed, steps: 1, cfg: 1, sampler_name: 'euler', scheduler: 'normal', denoise: 1 } },
+        '60': { class_type: 'PMHistoryImages', inputs: { value: 64, batch: 1, latent: ['40', 0] } },
+        '70': { class_type: 'SaveImage', inputs: { images: ['60', 0], filename_prefix: prefix } },
+    };
+}
+
+test('an output of a workflow without a PromptManager node creates and links its prompt; a second run reuses it', async ({ execution }, testInfo) => {
+    const text = `foreign lighthouse at dusk ${testInfo.project.name} ${randomUUID()}`;
+    const first = await saved(execution.request, foreignGraph({ text, prefix: 'foreign/run' }));
+    await linkedTo(execution, first, text);
+    // Only the seed changes: a new file, the same text, so the same stored prompt.
+    const second = await saved(execution.request, foreignGraph({ text, seed: 2, prefix: 'foreign/run' }));
+    await linkedTo(execution, second, text);
+    const state = await readLinks(execution.databasePath, [first, second], [text]);
+    expect(state).toEqual({ links: { [first]: text, [second]: text }, stored: { [text]: true } });
+    // Decided from the graph at settle: nothing waits for the run's recorded outputs.
+    expect((await (await execution.request.get('/pm_execution_fixture/monitor')).json()).foreign).toEqual([]);
+});