Viewers could not find the plugin after installing. README install step 2 now has a picture
(both languages) of the cube button at the canvas's top left and the C menu path
Extensions -> Anomalous Model Browser -> Open / Reset floating entry position, and says how
to make the entry easier to spot (labeled pill, large, or the top action bar); a line under
the language links points there.
Taking the picture showed the cube covering the C menu's "New" row: it sat at z-index
2147483000. It is now 1000: over the canvas and its tool layer (999), under the top bar
(1001), menus (PrimeVue, about 1800) and dialogs. Checked on the test ComfyUI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ComfyUI listening on its LAN address only (#26): the browser on the same computer
comes from that very address, so it was taken for another device. A request whose
peer is the server's own end of the connection, naming that same IP, is local now;
DNS rebinding and proxy headers are still refused.
Opened from another device (#25), the settings page said the proxy's format was
wrong and that Civitai could not be reached, when the server had refused the
request. It now says so, and refusals point to the View only chip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Four pictures (Chinese and English) from the isolated test ComfyUI with
scenery only: a Gemini task in the AI workbench, and three saves of one
canvas with the saves bar. Taking them showed the AI workbench stage and
message box and the saves bar staying in the old language after a switch
until a reload: they are drawn again now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- run_workflow takes a gallery picture as its workflow (mcp_fill.opening
says what a name opens, for open_workflow too); a picture's workflow
opens with an id of its own, and the tab's mark goes into the workflow
before it loads, so ComfyUI finishing the tab does not drop it.
- With ComfyUI open in two browser tabs a task's actions were split
between them (one opened the task's tab, the other could not find it):
the page that did the last action gets the next first now, another
only when it is gone (mcp_bridge.py, pages keep an id of their own).
- describe_canvas on a big canvas: titles off, then nodes as a line each
with their settings, so every value stays readable.
- search_models names the models that did not fit; begin_task's tool
directory goes by name alone when the answer would be too long.
- ask_user refuses a "test" question with made-up options too.
- Exam round recorded: question 2 with nothing filed away, a big canvas
read right in 3 calls, question 3 in 12 calls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- An answer past Antigravity's size is filed away unread (eight LoRA
searches in the exam): search_models answers small (loaders once,
four trigger words, a LoRA's author weight); describe_canvas gives a
big canvas's last nodes a line each; mcp_fit.py keeps any other list
answer within the size and names what it left out.
- An empty canvas: run_workflow, describe_canvas and get_situation say
to open a workflow first; get_image_info says a picture's workflow
opens with open_workflow.
- ask_user does not put a "test" question to the user; a task's picture
count counts what its runs made.
- AMB failed to load now and then: ComfyUI loads every file at once and
ui_ai_workbench.js set ui_ai_toolbox.js's sideHost before it was made
when the toolbox file ran first. Connected on first draw now;
tests/load_order.mjs runs every file first.
- input_facts moved to api/picture_mask.py to keep mcp_tools.py short.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
To change a picture from the gallery the AI had to open the saved card
and set back, one by one, the model, LoRA and prompt the picture had
been made with (8 to 12 calls in the exam). open_workflow now takes a
picture's name too when no saved workflow has it: the server checks
the picture is in the output folder and carries a workflow, and the
page reads it from the PNG and opens it in a new tab, without the
marks of the tab it ran on (the card that tab came from, which
run_workflow would mistake it for, and its group of saves). The tool
list is 18 characters shorter than before.
Retaken with Gemini 3.8 Flash, questions 3 and 4 only: question 3 on a
changed picture went from 28 calls (7 failed) to 21 (4), opening the
picture's own workflow; written into docs/architecture/tool-exam.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Gemini 3.8 Flash took all 8 standard questions the 1.63 way (the
question in the task's message, the new task page's sentence to the
AI, a blank canvas each): 128 calls, 16% failed (21% last time), no
detours. Written into docs/architecture/tool-exam.md.
- A task's picture count counted a picture twice when the AI's report
showed the one its run had made; pictures are counted once each now.
- After a switch of language the AI workbench kept rows drawn in the
old one until a reload: syncRows makes a row again when the language
it was drawn in is not the one shown.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Current node showed "negative prompt" only on values from a workflow. A material's blocks carried no role, and when a picture and a workflow held the same text the merged card kept the picture's empty one, so a negative prompt could be offered to a positive box with nothing to say so.
- api/materials.py works the role out by what the prompt was wired to, as the material details already do; it reads the stored workflow, so pictures kept earlier get it too.
- node_parameter_sets.js takes the role from whichever source knows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Going back to a save left the last run's picture on the output node, so the canvas and the picture told different stories.
- api/workflow_saves.py keeps what each output node made, previews too, the newest 16, and read_group gives them as `outputs`.
- ui_snapshot_bar.js puts them on the nodes through the tab's changeTracker (store, restore): no `executed` event, so no plugin takes them for a new run. Several runs sit on the node as a batch does. A node the save has no picture for goes empty; Load Image's own picture stays (snapshot_plan.outputsAt).
The lit number went out every other time with a Preview Image on the canvas, and an empty undo step came with it: a loaded workflow serializes a little differently from its file, and a node gains an empty widget list when it shows a picture. The number now goes out only when the canvas really changed (withoutEmptyValues), and those differences take no step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every page in both languages, all themes and at 480:
- Give the window its own text colour: text with none took ComfyUI's, white on the light theme (Tidy headings and file names, the site chip).
- Keep a task's link chip in its row, its x in reach, and colour the next-task chip.
- Let choices in Settings wrap, the Models search shrink, and a workflow's preset row go to two lines.
- Add --amb-on-link for text on the accent: pale in the dark themes, so white was hard to read.
- Lists and colons follow the language (listSeparator, wordColon); tests/words_in_language.mjs keeps it so.
- Right plurals in English, "AI" on the rail, one line left in Chinese translated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Current node now reads what combos hold for the node's type: every box of
a node structure, by name, and a plain combo's prompt on a prompt box. They
get a chip of their own, a press goes to the combo, and the values go in
only on the user's press, as with the other sets (AD-021).
The rail's tools go by how often they are used: Current node, Model Check,
then the scan, and the tour follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A line per source with an Open link made the cards too dense. A set now
has a chip per channel (workflow, picture, saved here), each its own
colour: a press goes to the one source, or lists several by name first.
A name no longer repeats the node's type.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Types go by their usual names, base model chips narrow the list, the
version stands apart from the name, and a model's versions are one card
whose version opens the list to show another; a pick goes with it. The
grouping, the families and the type names are the Models page's own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Anima loads through other nodes than a checkpoint, so none of the examples
could open on it. Two passes now comes in three versions: SDXL / SD 1.5,
Anima on ComfyUI's own nodes, and the recommended Anima held by Tile, the
way's tested values, kept in step by a test. The own-nodes version redraws
at 0.35: at 0.5 the shapes began to move with nothing holding them.
The window shows plans, versions and notes. A version that lacks a pack
or a model says what and has no Open button; an AI only gets those that
can run here. The layers of cards, examples, ways and skills are written
down as AD-025.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ways: "Use it this time" in the Ways view, for one task. It joins the
task's picks as a new kind, the AI is told, and add_nodes builds that way
for its use whichever one the AI asks for. "Only" lets in the nodes a
picked way builds.
Examples: text to picture, two passes, picture to picture and repainting
an area, on ComfyUI's own nodes. One card, first on the Workflows page,
opens them in a tab of their own. The files name no model or picture; a
checkpoint and a picture that are here are filled in when one is read.
list_workflows gives them to an AI when no saved workflow fits, and they
open and run by name like saved ones.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each click drew the list from what was kept, then drew it all again when
the read came back, losing the scroll and what was open, and the first click
showed "reading". It is read ahead when the page shows a task, read
again quietly on opening, and drawn anew only when something changed. A
switch keeps the scroll too, and a failed read keeps a list that shows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It said "waiting for an AI" three times and kept two folds that did what
the message box does. Now it is the sentence and its Copy button, in the
middle of the column; what to say first and pictures go in the message
box, whose words say so. The connect card comes first until an AI has ever
come, and is gone after that. The wish line, the big gallery fold and
what only they used go with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new picture puts itself first in its line, so a press on a picture
ended on another one and was no click. While the main button is held on
a button of the list, what comes waits until the press and its click
are over.
Tested with a real mouse on an isolated ComfyUI: a press held until a
new picture came opened the pressed picture 4 times of 4 (0 before), and
16 of 16 long presses during runs answered (13 before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When a count's save failed the box kept what was typed, with only a
console warning, while Run went by the stored count. The box now goes
back to the stored one, a box being typed in too, and a toast says why.
Tested with a real mouse on an isolated ComfyUI, the save refused and
the server unreachable, on the bar and on the Saves page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Follow-ups hang one step in under the first task of their line, so the
list shows what goes on from what; a filter's tasks still show alone. Each
row has the head's menu, without opening the task. Removing a task joins
those after it to the one before. The pick list now stands over everything
at the place the menu opened: the head is drawn anew under an open menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The click can come before the answer to a count typed just before it,
and all three Run buttons held the saves as they were drawn: a save set
to 3 runs ran once. Run now waits for the counts on their way and reads
the group as it stands at its turn, in one place for all of them.
Tested with a real mouse on an isolated ComfyUI, the answer held back
400 ms: the bar, a part and a card each queue the new count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A part redrew on new elements each time a count was answered or a run
ended, so a press on the page lost its click and a count being typed
lost its focus. settle moves to ui_dom.js for both; a card is kept for
its save, and a picture line stands while its pictures do.
A press on a picture just as a new one reaches that line is still lost:
the line shifts, and another picture is under the pointer by the mouseup.
Tested with a real mouse on an isolated ComfyUI. tests/snapshot_bar.html
now covers the page and fails 5 checks on the previous code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every redraw replaced the whole row, and the browser sends no click to
an element that left the page during the press. Three things redraw in
that gap: ComfyUI's graphChanged at mouseup, the answer to a count, and
a run ending. The last also wiped a count being typed. Update the
elements in place, a save's part only for that save.
Tested with a real mouse on an isolated ComfyUI: 19 flows, 5 of them
passing before the fix. tests/snapshot_bar.html fails 7 checks on the
old code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Inserting took a round per LoRA. The picker now gathers them: click to add,
click again to drop, the number on a card is the order they go in. They go in
as a chain of ComfyUI's loaders, or through one Power Lora Loader or Easy-Use
stack where installed, all or nothing and as one undo step. Third-party nodes
change height just after they appear, so they are placed, and the step taken,
once they have settled. New nodes stand in one column and the view goes to
them when a crowded canvas leaves them out of sight.
Fixes the CLIP line going missing for a LoRA inserted before a sampler with a
LoRA already there: that LoRA counted as a prompt node, so there seemed to be
two CLIP sources.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening, closing and changing pages jumped; now they take a short
transition. Styles alone do it, since a dozen modules open the window:
anything leaving display: none starts its animation. The rail's highlight is
one piece that slides between the entries. Going between docked, floating
and full window lays the page out once and moves only its picture, where the
docked rule used to animate the width and lay it out on every frame.
Only opacity and position move, and all of it stays off under reduced motion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A card clips its content, so plain grid rows shrank to fit the list's height
instead of letting it scroll: with many workflows every card ended up 56 px
tall.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drag the right edge from 480 up to leaving 240 of the canvas; the width is
remembered and a double-click restores 660. The limits live in the CSS, so
they hold when the browser window shrinks too.
Going through every page at 480 turned up what this needed:
- Workflow cards shrank into strips instead of the list scrolling: a card
clips its content, so plain grid rows fit the height.
- The Prompts page's own columns beat the narrow stacked rule, leaving half
a page empty, in a narrow floating window too.
- The Models header pushed the close button out.
- The Workflows bar only wrapped on a small screen, not a small window.
- The AI tabs kept a gap for their hidden icons and wrapped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the list a drawer over the task, Esc closed the whole window while the
drawer was open. It now closes the drawer, and the window on the next press.
The task's back button left the Esc list: from the task it would only reopen
the drawer, and Esc could never reach the window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Filling the page, the list read as a page of its own rather than the records
of conversations. It now slides over the task shown, which stays visible and
dimmed beside it; a click there goes back. With no task it still fills the
page. The welcome page moved to ui_ai_ready.js to keep the workbench under its
size limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With no room for the side column the AI page showed a row of bare icons in the
title bar, and two tabs that changed under the user. It now shows labelled tabs
over the task, the timeline and every view, kept in the head while the
timeline scrolls, and words that named a right side say what they do. One
function gives both strips, in place of tabBar.
On a wide window the Prompts page left two thin boxes over empty space: the
boxes now share the room, side by side and full height, with wider cards. The
Saves page puts its cards side by side like the workflow cards and says how
many canvases and saves there are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ComfyUI imports every script under web/ on its own and at once, so any module
of the big import cycle can run first. ui_ai_workbench.js wrote to a const of
ui_ai_results.js as it loaded, which failed when ui_ai_results.js or
ui_ai_step_body.js was entered first, and the whole plugin went with it until
a reload. The value now lives in a module that imports nothing, and
tests/module_cycles.mjs refuses the pattern.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Walking through the AI workbench as a user: the task head held nine loose
controls that wrapped to four or five lines with the side column open. It is
now two lines whatever the width, with rename, privacy, links and remove in a
menu. The stages and what a task made share one line over the timeline, a
failed step is a mark instead of red text, New task opens at once, and a
missing label in the Ways panel is filled in.
The walk also caught AMB not starting at all on one page load. ComfyUI imports
every script under web/ on its own and at once, so any module of the big import
cycle can run first; ui_ai_workbench.js wrote to a const of ui_ai_results.js as
it loaded, which failed when that module was entered first. The value now
lives in a module that imports nothing, and tests/module_cycles.mjs refuses
the pattern.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A walk through the whole flow, as a user would, showed what felt wrong.
The folded bar floated over the canvas: it is now a handle on the canvas's
bottom edge. The bar lives in the canvas's panel, so the logs stay uncovered
and it wraps before going under ComfyUI's canvas tools; it holds the newest
six saves, the rest behind a button to the Saves page, instead of growing
into a block. A lit number now means the canvas stands at that save, going
dark on any change or undo. Words float over the bar and leave with the runs,
and on the page a kept card is a toast and runs show on their own save, so no
button moves under the pointer. Removing a save tells the next one what it
changes now, and the Saves view says the way back to the cards.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A save's line had a scrollbar under its pictures, and long change words had
one too. The line now holds what fits and folds the rest into a last +N tile,
refitting when the window changes. The tile, or the save's menu when all fit,
opens all its pictures as the gallery's own cards, in the list's place until
Back or Esc. Cards take their pictures from an option, so stepping, delete
and compare stay inside the save; the Gallery page passes nothing and works
as before. Change words stop at four lines, the rest on hover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pictures dropped to a line of their own under the save's words, and a
thin line was all that told one save from the next. Each save is now a card:
what changed, its runs and buttons on the left, its pictures in a line on the
right, going under them only in a narrow window. A picture opens View
Parameters too, and the arrow keys step through all of that save's pictures.
The part sets its own text color, which light themes were missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Presets, combos and Add to saves took more to keep sensible than they gave,
so a save now only becomes a new workflow card and only the canvas makes one.
The panel above the bar moves to the Saves page, a part for each canvas, open
or not, with each save's pictures and its runs: the whole group in order, or
one save alone. Running moves to snapshot_run.js for the bar and the page;
what is clicked goes in in click order, and closed canvases run too.
A run taken off ComfyUI's queue is now forgotten at once, so "runs to go" does
not stay wrong for a day. A first save on an unsaved tab now reaches ComfyUI's
draft of it, so a reload right after keeps the tab's saves on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A save copies to a workflow card, a preset of a card with the same structure, or a
combo; a card's preset can join the open canvas's saves. The Workflows page lists
every group, so saves of a closed tab or a deleted file can be opened again, on a
new tab where the group goes on, or removed. A card keeps no key of a canvas's saves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Saves move from the page to a store (api/workflow_saves.py), a group for each
canvas, found by a key in the workflow's extra or by its file, and go into
backups. The bar follows the open tab. A save's runs are named to the server, which
finds their pictures in ComfyUI's history, so a reload during a run loses nothing.
A save opens above the bar with what it made and what changed; removing one goes to
the Recycle Bin, and a group past its most takes no more and drops nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ComfyUI-Manager wraps app.graphToPrompt and drops the graph, so every run and
the check before it compiled the canvas: same seeds, nothing of the later marks.
A result that is not the copy's is now made by ComfyUI's own method.
Going back is one of ComfyUI's undo steps, so Ctrl+Z returns to the state left
behind. A save can also open on a new tab, the empty canvas's menu and a + on
the bar keep one, and marks show as saves, runs counted as runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Flash exam showed a light model can build a route it is told, so the reminder
no longer sends the user to a flagship model: the route is untried, see how the
run turns out, and save a card if it is good.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A node's "Mark this state" keeps the serialized canvas as a mark in a bar
under it. A mark's number goes back to that state, each has its runs, and
seeds are Random or Locked (one per round, shared by the marks; a fixed
seed alone would come from ComfyUI's cache). Run checks every mark with
validate_prompt first, then compiles detached copies with their seeds
written, so the canvas and its seeds stay as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With two main models picked, ask_user(routes=true) shows the routes this
ComfyUI can build for them, each with what it does to the picture and a
sample, a saved card using both first; the answer says what to call, and
add_nodes(route=...) builds the route from the ways on a new tab, the LoRAs
on each model. get_toolbox lists each model's cards as its examples. A way
counts as ready when a family variant has what it needs. An AI placing
nodes itself is a new route: one reminder a task, or with the new gate the
user's OK.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Upscale held by Tile takes in the tile upscale, the Anima Tile detail
upscale and the second-model upscale: its redraw has its own copy of the
canvas's model line (copy_of "$sampler.model": loader and LoRAs, titled
"Upscale model"), so a second model is one set_model and the LoRAs stay;
on Anima it is the user's tested route (latent 1.22x, Tile LLLite,
denoise 0.85). The iterative upscale goes. add_nodes no longer lists every
block name, and the repaint hints name the use, not a block.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
run_workflow(base_only) queues the first pass alone (base_only.js cuts each
queued prompt; save nodes become previews, the canvas stays). When it ends,
ai_bases.py shows the previews on a picks panel; the picked one is copied
into the output folder and its seed held. The next run takes the kept
picture where the rest takes the base's picture, so the base is not drawn
again; a base handed on as a latent (mid-way switch) is drawn again from
its seed and compared with the kept one. Drawn again from the same seed, a
base once came out grainy on a 6 GB card, hence the kept picture.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Three fixes from the user's use of the current-node panel:
- ⇄ Compare on a saved set listed the whole workflow's values. It now
compares that node alone: a copy of the node holding the set's values,
nothing wired, against the canvas, under the node's id so the two pair
(a set's workflow numbered otherwise, with two prompt nodes, paired
neither). compareParams takes `only` for this; the comparison window
takes `nodeId` and leaves out the structure badge. Every set can now be
compared; the unused "could not read the set's workflow" text is gone.
- The Change model picker drew cards of its own: full-size covers and
videos without a still, so most showed blank, and only file names. It
now shows the models page's card face (modelCardFace, split out of
ui_grid.js): the cover thumbnail, a video's still until pointed at, the
base badge, version, readable name and file name; "current" and the
chosen outline stay. Versions are not folded. Its type and base chips
and their texts are gone.
- In the generated-pictures gallery (current node, View all), once
scrolled, "Close gallery" opened the picture scrolled up under it:
Chrome's hit-testing again (lessons.md). Its scroll box and the
picker's card area get clip-path: inset(0).
Checked in an isolated ComfyUI: the prompt node's compare lists only its
text; the picker shows covers and names, selects, replaces; the models
page's cards keep their buttons and open the details; a 13-step scroll
of the gallery leaves every click on the close button. Full suite and
structure check pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The tab labels in the title bar folded to icons only when the browser
was under 1100 px. Docked, Anomalous is 660 px wide in a wide browser,
so the six labelled tabs pushed maximize, dock and close out of the
window. A container query on the Anomalous window folds them instead.
Checked in an isolated ComfyUI at 1600 px: docked (660 px) and the
narrowest floating window (600 px) show icons and all four buttons.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New way switch_midway (refine, want midway): the canvas's sampler becomes
two KSampler Advanced parts, the first on the canvas's model up to step
21, the second on a new loader from there, taking the old sampler's place
and links. On Anima it takes the tested sampling (35 steps,
dpmpp_2m_sde_gpu, beta): er_sde comes out grainy when split, even with
the same model in both parts, which the AI is told.
refine_other_model and upscale_two_models get Anima variants: a UNET
loader "like" the canvas's, reusing its text encoder, VAE and prompts; on
Anima the second-model upscale is the Tile route the user verified (1.22x
latent, LLLite 0.7, denoise 0.85, ColorMatch).
A node "like" or replacing a sampler now takes its seed as noise_seed on
KSampler Advanced and the other way round. The scene argument's
description is shorter to keep the tool list within its budget.
Ran on the isolated test ComfyUI on an Anima canvas: each way built
through add_nodes and made a picture (79 s, 148 s, 127 s on 6 GB).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The left column is gone. The details are one column: the flow, a row of
tabs under it (the workflow's own values, each preset with how many
values it changes, + to save the canvas or copy the one shown, all
pictures and versions at the end; it stays in view while the panel
scrolls) and the tab chosen in a panel joined to it.
The flow is small and shows only the structure: the stages in the order
they run, then the finishing nodes and the saves; above them one lane
each for the model files, the LoRAs and the control models, each a bar
over the stages it feeds (recipe_flow.flowLanes, tested). Steps, splits
and strengths moved into the boxes' tooltips; the legend and the hint
line are gone. What the preset shown changes from the workflow's own is
orange, and its head says how many values that is. A box's values open
under the flow only once one is picked, with x to close.
The set rows' key-value chips went with the column; the tabs count the
differences with ui_param_set_keys.setDifferences. Remaining "方案"
labels in the preset menus now say 预设.
Checked on the isolated test ComfyUI with the two-pass Anima card: each
preset marks the right boxes, the inspector, the + menu and its editor,
all pictures, versions, sticky tabs, and the narrow (docked) layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
