Release 2.11.0

CHANGELOG.md

@@ -2,8 +2,34 @@
 
 All notable changes to ComfyUI-AusBoss are documented here.
 
-## Unreleased
+## 2.11.0 - 2026-10-12
 
+- **New: Mask by Touch 🆎** (Mask). Click a thing on the picture and get
+  its mask. The picture is on the node: moving over it lights up what a
+  click would take and names it, the jacket and not the whole person, and
+  a click picks it. When a click could mean more than one thing, two
+  arrows beside the name swap the pick for the next thing at that spot.
+  Subject picks the picture's main subject in one click, and Background
+  everything else. Pick | Draw switches to a plain brush for an area you
+  paint yourself. + and - add or take away, and Undo takes a pick back.
+  Every pick has a chip under the picture: its cross takes the pick away,
+  a click on its name opens it so the arrows can swap it, "all" on a named
+  pick takes every thing of that name, and a field takes a name you type.
+  Fine edges is for hair and fur: the outline of the subject is followed
+  strand by strand, background seen between the strands goes, and the
+  cut-out loses the colour of the old background. Grow, Soften, Smooth and Fill small holes show on the picture
+  as you change them, and the eye beside Undo and Clear hides everything
+  else to show the result, as a cut-out or as the mask. Invert keeps
+  everything but the picks. It returns the mask, the picked area cut out on
+  a see-through background, and the names of what was picked. The search
+  is ComfyUI's own SAM 3: wire `model` and `clip` from a Load Checkpoint
+  that loads the SAM 3 file. Subject, Background and Fine edges use
+  ComfyUI's own background-removal model (`birefnet.safetensors`, ComfyUI
+  0.21 or newer); the help page says where to get it.
+  With a Load Image, or the pack's own Image Crop + Rotate + Pad or Load
+  Image + Pad, wired straight in, the picture shows on the node by itself
+  once you choose a file; with anything else before it, one press on Show
+  picture brings it up.
 - **A Workflow Switches row can run one part and switch another off.** Until
   now a row only turned its own nodes off and on. Give it an off side, nodes
   that run only while the row is off, and one click does both. For example,
@@ -15,6 +41,20 @@ All notable changes to ComfyUI-AusBoss are documented here.
   row's off side. A small sign of two arrows beside the label shows which
   rows have one, and the frame button brings both sides into view. A workflow
   saved before this works as it did.
+- **Callout 🆎: links.** Words in a note can be a link. Select them, press
+  the new **Link** button and paste an address, or paste the address
+  straight over them: a click later opens that page in a new tab. Click a
+  node or a group on the canvas first and the words bring it into view
+  instead, and an arrow can now point at a group as well as a node. A note
+  that is nothing but one link is a big button for it. Only `http` and
+  `https` addresses become links.
+- **Callout 🆎: small print under a line.** Put the caret on a line and press
+  the new **Small** button while you edit, and that line is drawn small
+  under the line above it. A note can carry a first line big enough to read
+  from far out and the details beside it. In the text it is a line that
+  starts with six `#`. Notes written before look the same, and an older
+  version of the pack shows a note with small print with every line at one
+  size.
 - **Float 🆎 and Integer 🆎 take the limits of what they are wired to.** A
   Float wired to a sampler's denoise now stops at 1, the way ComfyUI's own
   Primitive node does: type 1.5 and you get 1. The card shows the limits
@@ -48,32 +88,6 @@ All notable changes to ComfyUI-AusBoss are documented here.
 - **Image Size 🆎 shows what it measured.** After a run each output shows
   its number, such as `width: 1024`, so you can read a picture's size
   without wiring anything to it. The node stays the size it was.
-- **New: Mask by Touch 🆎** (Mask). Click a thing on the picture and get
-  its mask. The picture is on the node: moving over it lights up what a
-  click would take and names it, the jacket and not the whole person, and
-  a click picks it. When a click could mean more than one thing, two
-  arrows beside the name swap the pick for the next thing at that spot.
-  Subject picks the picture's main subject in one click, and Background
-  everything else. Pick | Draw switches to a plain brush for an area you
-  paint yourself. + and - add or take away, and Undo takes a pick back.
-  Every pick has a chip under the picture: its cross takes the pick away,
-  a click on its name opens it so the arrows can swap it, "all" on a named
-  pick takes every thing of that name, and a field takes a name you type.
-  Fine edges is for hair and fur: the outline of the subject is followed
-  strand by strand, background seen between the strands goes, and the
-  cut-out loses the colour of the old background. Grow, Soften, Smooth and Fill small holes show on the picture
-  as you change them, and the eye beside Undo and Clear hides everything
-  else to show the result, as a cut-out or as the mask. Invert keeps
-  everything but the picks. It returns the mask, the picked area cut out on
-  a see-through background, and the names of what was picked. The search
-  is ComfyUI's own SAM 3: wire `model` and `clip` from a Load Checkpoint
-  that loads the SAM 3 file. Subject, Background and Fine edges use
-  ComfyUI's own background-removal model (`birefnet.safetensors`, ComfyUI
-  0.21 or newer); the help page says where to get it.
-  With a Load Image, or the pack's own Image Crop + Rotate + Pad or Load
-  Image + Pad, wired straight in, the picture shows on the node by itself
-  once you choose a file; with anything else before it, one press on Show
-  picture brings it up.
 - **LoRA Loader: add a whole folder from + LoRA.** Files are grouped by
   folder in the picker. Click a file to add one, or a folder name to add
   all its LoRAs, including nested folders. Separate arrows collapse and
@@ -81,42 +95,12 @@ All notable changes to ComfyUI-AusBoss are documented here.
   matching files without changing that view. Existing files are skipped and
   existing rows keep their settings. The selection is one undo step; if
   it would exceed 64 rows, nothing is added and a message explains why.
-- **LoRA Loader: Remove this LoRA is red too.** The single-row action is
-  easier to spot beside the separate, confirmed Delete all action.
 - **LoRA Loader: browse and edit rows with the keyboard.** Tab to a row,
   then use Up/Down to reach other rows or + LoRA, Enter to pick a file,
   Space to switch a row off/on, and Left/Right to adjust strength. Shift
   uses a smaller step. Typing and ComfyUI shortcuts keep their usual keys.
-- **Crop + Rotate + Pad editor: Show blend no longer tints an edge you did
-  not pad.** With **Show blend** on, a teal band could run along the bottom
-  or the right edge of the picture where there was no padding, as if the
-  generation took over there. It never did: the run kept that edge as it
-  was, and only the preview was wrong. The preview now shows a blend only
-  where the run has one. The same for both Video Crop + Rotate + Pad nodes.
-- **Callout 🆎: small print under a line.** Put the caret on a line and press
-  the new **Small** button while you edit, and that line is drawn small
-  under the line above it. A note can carry a first line big enough to read
-  from far out and the details beside it. In the text it is a line that
-  starts with six `#`. Notes written before look the same, and an older
-  version of the pack shows a note with small print with every line at one
-  size.
-- **Callout 🆎: links.** Words in a note can be a link. Select them, press
-  the new **Link** button and paste an address, or paste the address
-  straight over them: a click later opens that page in a new tab. Click a
-  node or a group on the canvas first and the words bring it into view
-  instead, and an arrow can now point at a group as well as a node. A note
-  that is nothing but one link is a big button for it. Only `http` and
-  `https` addresses become links.
-- **Image Crop + Rotate + Pad and the two Video Crop + Rotate + Pad nodes: no
-  more thin line on an edge you did not pad.** With **Divisible by** above 1,
-  the few pixels needed to reach the number were always added as fill on the
-  right and bottom, even where you had not padded. With Resize on, that strip
-  blurred into the picture's last column or row and the stitched result kept
-  it as a light or dark line. Now those pixels join a side you padded, and a
-  side with no padding is trimmed by a few pixels instead, as Load Image +
-  Pad does. With no padding at all the size now rounds down instead of up:
-  1000×750 at 64 gives 960×704, not 1024×768. The picture on the node, the
-  size line and the editor show the same. Saved workflows load as before.
+- **LoRA Loader: Remove this LoRA is red too.** The single-row action is
+  easier to spot beside the separate, confirmed Delete all action.
 - **Crop + Rotate + Pad nodes: Resize keeps the edge of your picture
   clean.** With Resize on, the padded canvas was resized as one picture,
   which mixed a little fill into the picture along every padded edge and
@@ -127,6 +111,22 @@ All notable changes to ComfyUI-AusBoss are documented here.
   step, each band is a whole number of pixels wide, and the output size
   is the same as before. The picture itself can sit up to half a pixel
   from where it did. Nothing changes with Resize off or with no padding.
+- **Image Crop + Rotate + Pad and the two Video Crop + Rotate + Pad nodes: no
+  more thin line on an edge you did not pad.** With **Divisible by** above 1,
+  the few pixels needed to reach the number were always added as fill on the
+  right and bottom, even where you had not padded. With Resize on, that strip
+  blurred into the picture's last column or row and the stitched result kept
+  it as a light or dark line. Now those pixels join a side you padded, and a
+  side with no padding is trimmed by a few pixels instead, as Load Image +
+  Pad does. With no padding at all the size now rounds down instead of up:
+  1000×750 at 64 gives 960×704, not 1024×768. The picture on the node, the
+  size line and the editor show the same. Saved workflows load as before.
+- **Crop + Rotate + Pad editor: Show blend no longer tints an edge you did
+  not pad.** With **Show blend** on, a teal band could run along the bottom
+  or the right edge of the picture where there was no padding, as if the
+  generation took over there. It never did: the run kept that edge as it
+  was, and only the preview was wrong. The preview now shows a blend only
+  where the run has one. The same for both Video Crop + Rotate + Pad nodes.
 
 ## 2.10.1 - 2026-10-09
 

js/shared/index.mjs

@@ -9,7 +9,7 @@ import { app } from "/scripts/app.js";
 // Must match `version` in pyproject.toml — scripts/release_preflight.py
 // enforces it. The backend serves its copy at /ausboss/pack_version; a
 // mismatch means the browser cached JavaScript from an older install.
-export const AUSBOSS_JS_VERSION = "2.10.1";
+export const AUSBOSS_JS_VERSION = "2.11.0";
 
 export const BRAND = "#00b4aa"; // AusBoss teal — keep node accents consistent.
 export const BRAND_DARK = "#007f78";

pyproject.toml

@@ -3,7 +3,7 @@ name = "ausboss-nodes"
 # Manager/registry search matches against this text, so it names the actual
 # nodes instead of describing the collection abstractly.
 description = "ComfyUI-AusBoss (AusBoss nodes): image and video nodes with compact controls: Image and Video Crop + Rotate + Pad (frame or clip), Load Image + Pad, Image Folder (run a workflow on a folder of pictures), Image Resize, Align Image, Image Size, Color Match, Image Compare A/B, Realign to Source (experimental: lines an edit back up with its source), Save Image (PNG, lossless WebP/JXL, exact names, captions), Load Video, Save Video, Select Frame, Frame Interpolate, Mask Refine, Mask by Name (type what to find, get its mask), LaMa Inpaint, Crop For Inpaint, Stitch Inpaint, Tiled Upscale and Tiled Upscale Stitch (upscale in tiles), LoRA Loader, Krea 2 Encode and Outpaint Model Patch, Latent Size, Seed, Select Every Nth, Split Batch, Merge Batches, Text, Integer, Float, Math Expression, Show Text, Free Memory, Workflow Note, Callout (a note with arrows), Workflow Switches (parts of a workflow off and on), and Run Timer. Example workflows for Qwen Image 2.1, Krea 2, Klein 9B and LTX 2.3."
-version = "2.10.1"
+version = "2.11.0"
 # comfy-cli serializes this to JSON verbatim, so `file` publishes the literal
 # string {"file": "LICENSE"} to the registry listing. `text` puts a readable
 # name there instead. Both forms are supported; the LICENSE file is unchanged.