bump version

- If everything is working as expected, this conflict shouldn't occur. However, some node pack might be adding the `impact` module to `sys.path`.

https://github.com/ltdrdata/ComfyUI-Impact-Pack/issues/1022

README.md

@@ -189,6 +189,10 @@ NOTE: The UltralyticsDetectorProvider node is not part of the ComfyUI-Impact-Pac
   * `PreviewDetailerHook` - Connecting this hook node helps provide assistance for viewing previews whenever SEGS Detailing tasks are completed. When working with a large number of SEGS, such as Make Tile SEGS, it allows for monitoring the situation as improvements progress incrementally.
     * Since this is the hook applied when pasting onto the original image, it has no effect on nodes like `SEGSDetailer`.
   * `VariationNoiseDetailerHookProvider` - Apply variation seed to the detailer. It can be applied in multiple stages through combine.
+  * `CustomSamplerDetailerHookProvider` - Apply a hook that allows you to use a custom sampler in the Detailer nodes. When using `DetailerHookCombine`, the sampler from the first hook is applied.
+  * `LamaRemoverDetailerHookProvider` – Applies Lama Remover to the upscaled image during the detailing stage. If `skip_sampling` is set to True, Lama Remover can be used alone without the detailing stage, allowing it to simply remove detected regions.
+      * Not applicable for **AnimateDiff** detailers. When using `DetailerHookCombine`, `skip_sampling` is only applied if it is set to `True` for all hooks.
+      * To use this node, the node pack at [Layer-norm/comfyui-lama-remover](https://github.com/Layer-norm/comfyui-lama-remover) must be installed.
 
 ### Iterative Upscale nodes
   * `Iterative Upscale (Latent/on Pixel Space)` - The upscaler takes the input upscaler and splits the scale_factor into steps, then iteratively performs upscaling. 
@@ -488,3 +492,5 @@ BlenderNeok/[ComfyUI_Noise](https://github.com/BlenderNeko/ComfyUI_Noise) - The
 WASasquatch/[was-node-suite-comfyui](https://github.com/WASasquatch/was-node-suite-comfyui) - A powerful custom node extensions of ComfyUI.
 
 Trung0246/[ComfyUI-0246](https://github.com/Trung0246/ComfyUI-0246) - Nice bypass hack!
+
+Layer-norm/[comfyui-lama-remover](https://github.com/Layer-norm/comfyui-lama-remover) - Required for using `LamaRemoverDetailerHook`.

__init__.py

@@ -122,6 +122,8 @@ NODE_CLASS_MAPPINGS = {
     "UnsamplerHookProvider": UnsamplerHookProvider,
     "CoreMLDetailerHookProvider": CoreMLDetailerHookProvider,
     "PreviewDetailerHookProvider": PreviewDetailerHookProvider,
+    "CustomSamplerDetailerHookProvider": CustomSamplerDetailerHookProvider,
+    "LamaRemoverDetailerHookProvider": LamaRemoverDetailerHookProvider,
 
     "DetailerHookCombine": DetailerHookCombine,
     "NoiseInjectionDetailerHookProvider": NoiseInjectionDetailerHookProvider,

install.py

@@ -68,7 +68,6 @@ def process_wrap(cmd_str, cwd=None, handler=None, env=None):
 
 
 try:
-    import platform
     from torchvision.datasets.utils import download_url
     import impact.config
 
@@ -99,7 +98,7 @@ try:
                 if not os.path.exists(os.path.join(sam_path, "sam_vit_b_01ec64.pth")):
                     download_url("https://dl.fbaipublicfiles.com/segment_anything/sam_vit_b_01ec64.pth", sam_path)
             except:
-                print(f"[Impact Pack] Failed to auto-download model files. Please download them manually.")
+                print("[Impact Pack] Failed to auto-download model files. Please download them manually.")
 
         if not os.path.exists(onnx_path):
             print(f"### ComfyUI-Impact-Pack: onnx model directory created ({onnx_path})")
@@ -108,18 +107,21 @@ try:
         impact.config.write_config()
 
         # Remove legacy subpack
-        subpack_path = os.path.join(os.path.dirname(__file__), 'impact_subpack')
-        if os.path.exists(subpack_path):
-            shutil.rmtree(subpack_path)
-            print(f"Legacy subpack is detected. '{subpack_path}' is removed.")
-            
-        subpack_path = os.path.join(os.path.dirname(__file__), 'subpack')
-        if os.path.exists(subpack_path):
-            shutil.rmtree(subpack_path)
-            print(f"Legacy subpack is detected. '{subpack_path}' is removed.")
+        try:
+            subpack_path = os.path.join(os.path.dirname(__file__), 'impact_subpack')
+            if os.path.exists(subpack_path):
+                shutil.rmtree(subpack_path)
+                print(f"Legacy subpack is detected. '{subpack_path}' is removed.")
+                
+            subpack_path = os.path.join(os.path.dirname(__file__), 'subpack')
+            if os.path.exists(subpack_path):
+                shutil.rmtree(subpack_path)
+                print(f"Legacy subpack is detected. '{subpack_path}' is removed.")
+        except:
+            print(f"ERROT: Failed to delete legacy subpack '{subpack_path}'\nPlease delete the folder after terminate ComfyUI.")
 
     install()
 
-except Exception as e:
+except Exception:
     print("[ERROR] ComfyUI-Impact-Pack: Dependency installation has failed. Please install manually.")
     traceback.print_exc()

js/impact-pack.js

@@ -370,12 +370,12 @@ app.registerExtension({
 				if(type == 2) {
 					// connect output
 					if(connected){
-						if(app.graph._nodes_by_id[link_info.target_id].type == 'Reroute') {
+						if(app.graph._nodes_by_id[link_info.target_id]?.type == 'Reroute') {
 							app.graph._nodes_by_id[link_info.target_id].disconnectInput(link_info.target_slot);
 						}
 
 						if(this.outputs[0].type == '*'){
-							if(link_info.type == '*') {
+							if(link_info.type == '*' && app.graph.getNodeById(link_info.target_id).slots[link_info.target_slot].type != '*') {
 								app.graph._nodes_by_id[link_info.target_id].disconnectInput(link_info.target_slot);
 							}
 							else {
@@ -392,7 +392,7 @@ app.registerExtension({
 					}
 				}
 				else {
-					if(app.graph._nodes_by_id[link_info.origin_id].type == 'Reroute')
+					if(app.graph._nodes_by_id[link_info.origin_id]?.type == 'Reroute')
 						this.disconnectInput(link_info.target_slot);
 
 					// connect input
@@ -404,7 +404,7 @@ app.registerExtension({
 							return; // fallback
 						}
 
-						if(origin_type == '*') {
+						if(origin_type == '*' && app.graph.getNodeById(link_info.origin_id).slots[link_info.origin_slot].type != '*') {
 							this.disconnectInput(link_info.target_slot);
 							return;
 						}
@@ -428,8 +428,9 @@ app.registerExtension({
 						!stackTrace.includes('LGraphNode.prototype.connect') && // for touch device
 						!stackTrace.includes('LGraphNode.connect') && // for mouse device
 						!stackTrace.includes('loadGraphData')) {
-							if(this.outputs[link_info.origin_slot].links.length == 0)
+							if(this.outputs[link_info.origin_slot].links.length == 0) {
 								this.removeOutput(link_info.origin_slot);
+							}
 					}
 				}
 
@@ -442,9 +443,12 @@ app.registerExtension({
 					slot_i++;
 				}
 
-				let last_slot = this.outputs[this.outputs.length - 1];
-				if (last_slot.slot_index == link_info.origin_slot) {
-					this.addOutput(`output${slot_i}`, this.outputs[0].type);
+				if(connected) {
+					// NOTE: node.slot_index is different with link_info.origin_slot
+					let last_slot_index = this.outputs.length - 1;
+					if (last_slot_index == link_info.origin_slot) {
+						this.addOutput(`output${slot_i}`, this.outputs[0].type);
+					}
 				}
 
 				let select_slot = this.inputs.find(x => x.name == "select");
@@ -508,9 +512,19 @@ app.registerExtension({
 			const onConnectionsChange = nodeType.prototype.onConnectionsChange;
 			nodeType.prototype.onConnectionsChange = function (type, index, connected, link_info) {
 				const stackTrace = new Error().stack;
-				if(stackTrace.includes('LGraph.configure')) {
-					this.widgets[0].options.max = this.inputs.length-3;
-					this.widgets[0].value = Math.min(this.widgets[0].value, this.widgets[0].options.max);
+				if(stackTrace.includes('loadGraphData')) {
+					if(this.widgets?.[0]) {
+						this.widgets[0].options.max = this.inputs.length-3;
+						this.widgets[0].value = Math.min(this.widgets[0].value, this.widgets[0].options.max);
+					}
+					return;
+				}
+
+				if(stackTrace.includes('pasteFromClipboard')) {
+					if(this.widgets?.[0]) {
+						this.widgets[0].options.max = this.inputs.length-3;
+						this.widgets[0].value = Math.min(this.widgets[0].value, this.widgets[0].options.max);
+					}
 					return;
 				}
 
@@ -525,7 +539,7 @@ app.registerExtension({
 						}
 
 						if(this.outputs[0].type == '*'){
-							if(link_info.type == '*') {
+							if(link_info.type == '*' && app.graph.getNodeById(link_info.target_id).slots[link_info.target_slot].type != '*') {
 								app.graph._nodes_by_id[link_info.target_id].disconnectInput(link_info.target_slot);
 							}
 							else {
@@ -561,7 +575,7 @@ app.registerExtension({
 								node.connect(link_info.origin_slot, node.id, 'input1');
 						}
 						
-						if(origin_type == '*') {
+						if(origin_type == '*' && app.graph.getNodeById(link_info.origin_id).slots[link_info.origin_slot].type != '*') {
 							this.disconnectInput(link_info.target_slot);
 							return;
 						}
@@ -604,8 +618,10 @@ app.registerExtension({
 					this.addInput(`${input_name}${slot_i}`, this.outputs[0].type);
 				}
 
-				this.widgets[0].options.max = this.inputs.length-3;
-				this.widgets[0].value = Math.min(this.widgets[0].value, this.widgets[0].options.max);
+				if(this.widgets?.[0]) {
+					this.widgets[0].options.max = this.inputs.length-3;
+					this.widgets[0].value = Math.min(this.widgets[0].value, this.widgets[0].options.max);
+				}
 			}
 		}
 	},

locales/ko/nodeDefs.json

@@ -1196,7 +1196,7 @@
 
     "ImpactWildcardEncode": {
         "description": "이 노드는 와일드카드 구문으로 작성된 텍스트 프롬프트를 처리하고 이를 조건으로 출력합니다. 또한 LoRA 구문을 지원하며, 적용된 LoRA는 모델 출력에 반영됩니다.\n\nTIP1: 워크플로가 실행되기 전에 '와일드카드 텍스트'의 처리 결과가 '채워진 텍스트'에 표시되며, 이 값은 워크플로와 함께 저장됩니다. 입력으로 변환된 시드를 사용하려면 '와일드카드 텍스트' 대신 '채워진 텍스트'에 직접 프롬프트를 작성하고, 모드를 '고정(fixed)'로 설정하세요.\nTIP2: 'Inspire Pack'이 설치되어 있으면 LBW(로라 블록 웨이트) 구문도 적용할 수 있습니다.",
-        "display_name": "와일드카드 처리기 (Impact)",
+        "display_name": "와일드카드 인코딩 (Impact)",
         "inputs": {
             "wildcard_text": {
                 "name": "와일드카드 텍스트",

modules/impact/config.py

@@ -1,7 +1,7 @@
 import configparser
 import os
 
-version_code = [8, 13]
+version_code = [8, 17, 1]
 version = f"V{version_code[0]}.{version_code[1]}" + (f'.{version_code[2]}' if len(version_code) > 2 else '')
 
 dependency_version = 24

modules/impact/core.py

@@ -320,6 +320,9 @@ def enhance_detail(image, model, clip, vae, guide_size, guide_size_for_bbox, max
     # upscale
     upscaled_image = tensor_resize(image, new_w, new_h)
 
+    if detailer_hook is not None:
+        upscaled_image = detailer_hook.post_upscale(upscaled_image, noise_mask)
+
     cnet_pils = None
     if control_net_wrapper is not None:
         positive, negative, cnet_pils = control_net_wrapper.apply(positive, negative, upscaled_image, noise_mask)
@@ -327,61 +330,69 @@ def enhance_detail(image, model, clip, vae, guide_size, guide_size_for_bbox, max
         cnet_pils.extend(cnet_pils2)
 
     # prepare mask
-    if noise_mask is not None and inpaint_model:
-        imc_encode = nodes.InpaintModelConditioning().encode
-        if 'noise_mask' in inspect.signature(imc_encode).parameters:
-            positive, negative, latent_image = imc_encode(positive, negative, upscaled_image, vae, mask=noise_mask, noise_mask=True)
+    if detailer_hook is None or not detailer_hook.get_skip_sampling():
+        if noise_mask is not None and inpaint_model:
+            imc_encode = nodes.InpaintModelConditioning().encode
+            if 'noise_mask' in inspect.signature(imc_encode).parameters:
+                positive, negative, latent_image = imc_encode(positive, negative, upscaled_image, vae, mask=noise_mask, noise_mask=True)
+            else:
+                print(f"[Impact Pack] ComfyUI is an outdated version.")
+                positive, negative, latent_image = imc_encode(positive, negative, upscaled_image, vae, noise_mask)
         else:
-            print(f"[Impact Pack] ComfyUI is an outdated version.")
-            positive, negative, latent_image = imc_encode(positive, negative, upscaled_image, vae, noise_mask)
-    else:
-        latent_image = to_latent_image(upscaled_image, vae, vae_tiled_encode=vae_tiled_encode)
-        if noise_mask is not None:
-            latent_image['noise_mask'] = noise_mask
+            latent_image = to_latent_image(upscaled_image, vae, vae_tiled_encode=vae_tiled_encode)
+            if noise_mask is not None:
+                latent_image['noise_mask'] = noise_mask
 
-    if detailer_hook is not None:
-        latent_image = detailer_hook.post_encode(latent_image)
-
-    refined_latent = latent_image
-
-    # ksampler
-    for i in range(0, cycle):
         if detailer_hook is not None:
+            latent_image = detailer_hook.post_encode(latent_image)
+
+        refined_latent = latent_image
+
+        sampler_opt=None
+        if detailer_hook is not None:
+            sampler_opt = detailer_hook.get_custom_sampler()
+
+        # ksampler
+        for i in range(0, cycle):
             if detailer_hook is not None:
-                detailer_hook.set_steps((i, cycle))
+                if detailer_hook is not None:
+                    detailer_hook.set_steps((i, cycle))
 
-            refined_latent = detailer_hook.cycle_latent(refined_latent)
+                refined_latent = detailer_hook.cycle_latent(refined_latent)
 
-            model2, seed2, steps2, cfg2, sampler_name2, scheduler2, positive2, negative2, upscaled_latent2, denoise2 = \
-                detailer_hook.pre_ksample(model, seed+i, steps, cfg, sampler_name, scheduler, positive, negative, latent_image, denoise)
-            noise, is_touched = detailer_hook.get_custom_noise(seed+i, torch.zeros(latent_image['samples'].size()), is_touched=False)
-            if not is_touched:
+                model2, seed2, steps2, cfg2, sampler_name2, scheduler2, positive2, negative2, upscaled_latent2, denoise2 = \
+                    detailer_hook.pre_ksample(model, seed+i, steps, cfg, sampler_name, scheduler, positive, negative, latent_image, denoise)
+                noise, is_touched = detailer_hook.get_custom_noise(seed+i, torch.zeros(latent_image['samples'].size()), is_touched=False)
+                if not is_touched:
+                    noise = None
+            else:
+                model2, seed2, steps2, cfg2, sampler_name2, scheduler2, positive2, negative2, upscaled_latent2, denoise2 = \
+                    model, seed + i, steps, cfg, sampler_name, scheduler, positive, negative, latent_image, denoise
                 noise = None
+
+            refined_latent = impact_sampling.ksampler_wrapper(model2, seed2, steps2, cfg2, sampler_name2, scheduler2, positive2, negative2,
+                                                              refined_latent, denoise2, refiner_ratio, refiner_model, refiner_clip, refiner_positive, refiner_negative,
+                                                              noise=noise, scheduler_func=scheduler_func, sampler_opt=sampler_opt)
+
+        if detailer_hook is not None:
+            refined_latent = detailer_hook.pre_decode(refined_latent)
+
+        # non-latent downscale - latent downscale cause bad quality
+        start = time.time()
+        if vae_tiled_decode:
+            (refined_image,) = nodes.VAEDecodeTiled().decode(vae, refined_latent, 512) # using default settings
+            print(f"[Impact Pack] vae decoded (tiled) in {time.time() - start:.1f}s")
         else:
-            model2, seed2, steps2, cfg2, sampler_name2, scheduler2, positive2, negative2, upscaled_latent2, denoise2 = \
-                model, seed + i, steps, cfg, sampler_name, scheduler, positive, negative, latent_image, denoise
-            noise = None
-
-        refined_latent = impact_sampling.ksampler_wrapper(model2, seed2, steps2, cfg2, sampler_name2, scheduler2, positive2, negative2,
-                                                          refined_latent, denoise2, refiner_ratio, refiner_model, refiner_clip, refiner_positive, refiner_negative,
-                                                          noise=noise, scheduler_func=scheduler_func)
-
-    if detailer_hook is not None:
-        refined_latent = detailer_hook.pre_decode(refined_latent)
-
-    # non-latent downscale - latent downscale cause bad quality
-    start = time.time()
-    if vae_tiled_decode:
-        (refined_image,) = nodes.VAEDecodeTiled().decode(vae, refined_latent, 512) # using default settings
-        print(f"[Impact Pack] vae decoded (tiled) in {time.time() - start:.1f}s")
+            try:
+                refined_image = vae.decode(refined_latent['samples'])
+            except Exception as e:
+                # usually an out-of-memory exception from the decode, so try a tiled approach
+                print(f"[Impact Pack] failed after {time.time() - start:.1f}s, doing vae.decode_tiled 64...")
+                refined_image = vae.decode_tiled(refined_latent["samples"], tile_x=64, tile_y=64, )
+            print(f"[Impact Pack] vae decoded in {time.time() - start:.1f}s")
     else:
-        try:
-            refined_image = vae.decode(refined_latent['samples'])
-        except Exception as e:
-            # usually an out-of-memory exception from the decode, so try a tiled approach
-            print(f"[Impact Pack] failed after {time.time() - start:.1f}s, doing vae.decode_tiled 64...")
-            refined_image = vae.decode_tiled(refined_latent["samples"], tile_x=64, tile_y=64, )
-        print(f"[Impact Pack] vae decoded in {time.time() - start:.1f}s")
+        # skipped
+        refined_image = upscaled_image
 
     if detailer_hook is not None:
         refined_image = detailer_hook.post_decode(refined_image)
@@ -513,11 +524,16 @@ def enhance_detail_for_animatediff(image_frames, model, clip, vae, guide_size, g
         'samples': latent_frames
     }
 
+
+    sampler_opt=None
+    if detailer_hook is not None:
+        sampler_opt = detailer_hook.get_custom_sampler()
+
     if detailer_hook is not None:
         latent = detailer_hook.post_encode(latent)
 
     refined_latent = impact_sampling.ksampler_wrapper(model, seed, steps, cfg, sampler_name, scheduler, positive, negative,
-                                                      latent, denoise, refiner_ratio, refiner_model, refiner_clip, refiner_positive, refiner_negative, scheduler_func=scheduler_func)
+                                                      latent, denoise, refiner_ratio, refiner_model, refiner_clip, refiner_positive, refiner_negative, scheduler_func=scheduler_func, sampler_opt=sampler_opt)
 
     if detailer_hook is not None:
         refined_latent = detailer_hook.pre_decode(refined_latent)
@@ -1077,7 +1093,7 @@ class ONNXDetector:
     def detect(self, image, threshold, dilation, crop_factor, drop_size=1, detailer_hook=None):
         drop_size = max(drop_size, 1)
         try:
-            import impact.onnx as onnx
+            import impact.impact_onnx as onnx
 
             h = image.shape[1]
             w = image.shape[2]

modules/impact/detectors.py

@@ -163,7 +163,7 @@ class SegmDetectorCombined:
         mask = segm_detector.detect_combined(image, threshold, dilation)
 
         if mask is None:
-            mask = torch.zeros((image.shape[2], image.shape[1]), dtype=torch.float32, device="cpu")
+            mask = torch.zeros((image.shape[1], image.shape[2]), dtype=torch.float32, device="cpu")
 
         return (mask.unsqueeze(0),)
 
@@ -183,7 +183,7 @@ class BboxDetectorCombined(SegmDetectorCombined):
         mask = bbox_detector.detect_combined(image, threshold, dilation)
 
         if mask is None:
-            mask = torch.zeros((image.shape[2], image.shape[1]), dtype=torch.float32, device="cpu")
+            mask = torch.zeros((image.shape[1], image.shape[2]), dtype=torch.float32, device="cpu")
 
         return (mask.unsqueeze(0),)
 

modules/impact/hook_nodes.py

@@ -1,6 +1,8 @@
 import sys
 from . import hooks
 from . import defs
+from . import utils
+import nodes
 
 
 class SEGSOrderedFilterDetailerHookProvider:
@@ -83,3 +85,24 @@ class PreviewDetailerHookProvider:
     def doit(self, quality, unique_id):
         hook = hooks.PreviewDetailerHook(unique_id, quality)
         return hook, hook
+
+
+class LamaRemoverDetailerHookProvider:
+    @classmethod
+    def INPUT_TYPES(s):
+        return {
+            "required": {
+                "mask_threshold":("INT", {"default": 250, "min": 0, "max": 255, "step": 1, "display": "slider"}),
+                "gaussblur_radius": ("INT", {"default": 8, "min": 0, "max": 20, "step": 1, "display": "slider"}),
+                "skip_sampling": ("BOOLEAN", {"default": True}),
+            }
+        }
+
+    RETURN_TYPES = ("DETAILER_HOOK", )
+    FUNCTION = "doit"
+
+    CATEGORY = "ImpactPack/Util"
+
+    def doit(self, mask_threshold, gaussblur_radius, skip_sampling):
+        hook = hooks.LamaRemoverDetailerHook(mask_threshold, gaussblur_radius, skip_sampling)
+        return (hook, )

modules/impact/hooks.py

@@ -25,7 +25,7 @@ class PixelKSampleHook:
     def post_decode(self, pixels):
         return pixels
 
-    def post_upscale(self, pixels):
+    def post_upscale(self, pixels, mask=None):
         return pixels
 
     def post_encode(self, samples):
@@ -64,8 +64,8 @@ class PixelKSampleHookCombine(PixelKSampleHook):
     def post_decode(self, pixels):
         return self.hook2.post_decode(self.hook1.post_decode(pixels))
 
-    def post_upscale(self, pixels):
-        return self.hook2.post_upscale(self.hook1.post_upscale(pixels))
+    def post_upscale(self, pixels, mask=None):
+        return self.hook2.post_upscale(self.hook1.post_upscale(pixels, mask), mask)
 
     def post_encode(self, samples):
         return self.hook2.post_encode(self.hook1.post_encode(samples))
@@ -109,6 +109,15 @@ class DetailerHookCombine(PixelKSampleHookCombine):
         noise_2nd, is_touched = self.hook2.get_custom_noise(seed, noise, is_touched)
         return noise, is_touched
 
+    def get_custom_sampler(self):
+        if self.hook1.get_custom_sampler() is not None:
+            return self.hook1.get_custom_sampler()
+        else:
+            return self.hook2.get_custom_sampler()
+
+    def get_skip_sampling(self):
+        return self.hook1.get_skip_sampling() and self.hook2.get_skip_sampling()
+
 
 class SimpleCfgScheduleHook(PixelKSampleHook):
     target_cfg = 0
@@ -173,6 +182,21 @@ class DetailerHook(PixelKSampleHook):
     def get_custom_noise(self, seed, noise, is_touched):
         return noise, is_touched
 
+    def get_custom_sampler(self):
+        return None
+
+    def get_skip_sampling(self):
+        return False
+
+
+class CustomSamplerDetailerHookProvider(DetailerHook):
+    def __init__(self, sampler):
+        super().__init__()
+        self.sampler = sampler
+
+    def get_custom_sampler(self):
+        return self.sampler
+
 
 # class CustomNoiseDetailerHookProvider(DetailerHook):
 #     def __init__(self, noise):
@@ -486,6 +510,27 @@ class SEGSLabelFilterDetailerHook(DetailerHook):
         return segs_nodes.SEGSLabelFilter().doit(segs, "", self.labels)[0]
 
 
+class LamaRemoverDetailerHook(DetailerHook):
+    def __init__(self, mask_threshold, gaussblur_radius, skip_sampling):
+        super().__init__()
+        self.mask_threshold = mask_threshold
+        self.gaussblur_radius = gaussblur_radius
+        self.skip_sampling = skip_sampling
+
+    def post_upscale(self, img, mask=None):
+        if "LamaRemover" in nodes.NODE_CLASS_MAPPINGS:
+            lama_remover_obj = nodes.NODE_CLASS_MAPPINGS['LamaRemover']()
+        else:
+            utils.try_install_custom_node('https://github.com/Layer-norm/comfyui-lama-remover',
+                                          "To use 'LAMARemoverDetailerHookProvider', 'comfyui-lama-remover' nodepack is required.")
+            raise Exception("'LamaRemover' node is not installed.")
+
+        return lama_remover_obj.lama_remover(img, masks=mask, mask_threshold=self.mask_threshold, gaussblur_radius=self.gaussblur_radius, invert_mask=False)[0]
+
+    def get_skip_sampling(self):
+        return self.skip_sampling
+
+
 class PreviewDetailerHook(DetailerHook):
     def __init__(self, node_id, quality):
         super().__init__()

modules/impact/impact_pack.py

@@ -811,6 +811,26 @@ class CoreMLDetailerHookProvider:
         return (hook, )
 
 
+class CustomSamplerDetailerHookProvider:
+    @classmethod
+    def INPUT_TYPES(s):
+        return {"required": {
+                    "sampler": ("SAMPLER", ),
+                    },
+                }
+
+    RETURN_TYPES = ("DETAILER_HOOK",)
+    FUNCTION = "doit"
+
+    CATEGORY = "ImpactPack/Detailer"
+    
+    DESCRIPTION = "Apply a hook that allows you to use a custom sampler in the Detailer nodes. When using `DetailerHookCombine`, the sampler from the first hook is applied."
+
+    def doit(self, sampler):
+        hook = hooks.CustomSamplerDetailerHookProvider(sampler)
+        return (hook, )
+
+
 class CfgScheduleHookProvider:
     schedules = ["simple"]
 
@@ -1906,7 +1926,7 @@ class MaskRectArea:
         # search for node
         node_found = False
         for node in extra_pnginfo["workflow"]["nodes"]:
-            if node["id"] == int(unique_id):
+            if str(node["id"]) == unique_id:
                 min_x = node["properties"].get("x", 0) / 100
                 min_y = node["properties"].get("y", 0) / 100
                 width = node["properties"].get("w", 0) / 100

modules/impact/impact_sampling.py

@@ -194,7 +194,7 @@ def impact_sample(model, seed, steps, cfg, sampler_name, scheduler, positive, ne
 
 
 def ksampler_wrapper(model, seed, steps, cfg, sampler_name, scheduler, positive, negative, latent_image, denoise,
-                     refiner_ratio=None, refiner_model=None, refiner_clip=None, refiner_positive=None, refiner_negative=None, sigma_factor=1.0, noise=None, scheduler_func=None):
+                     refiner_ratio=None, refiner_model=None, refiner_clip=None, refiner_positive=None, refiner_negative=None, sigma_factor=1.0, noise=None, scheduler_func=None, sampler_opt=None):
 
     if refiner_ratio is None or refiner_model is None or refiner_clip is None or refiner_positive is None or refiner_negative is None:
         # Use separated_sample instead of KSampler for `AYS scheduler`
@@ -206,7 +206,7 @@ def ksampler_wrapper(model, seed, steps, cfg, sampler_name, scheduler, positive,
 
         refined_latent = separated_sample(model, True, seed, advanced_steps, cfg, sampler_name, scheduler,
                                           positive, negative, latent_image, start_at_step, end_at_step, False,
-                                          sigma_ratio=sigma_factor, noise=noise, scheduler_func=scheduler_func)
+                                          sigma_ratio=sigma_factor, sampler_opt=sampler_opt, noise=noise, scheduler_func=scheduler_func)
     else:
         advanced_steps = math.floor(steps / denoise)
         start_at_step = advanced_steps - steps
@@ -215,7 +215,7 @@ def ksampler_wrapper(model, seed, steps, cfg, sampler_name, scheduler, positive,
         # print(f"pre: {start_at_step} .. {end_at_step} / {advanced_steps}")
         temp_latent = separated_sample(model, True, seed, advanced_steps, cfg, sampler_name, scheduler,
                                        positive, negative, latent_image, start_at_step, end_at_step, True,
-                                       sigma_ratio=sigma_factor, noise=noise, scheduler_func=scheduler_func)
+                                       sigma_ratio=sigma_factor, sampler_opt=sampler_opt, noise=noise, scheduler_func=scheduler_func)
 
         if 'noise_mask' in latent_image:
             # noise_latent = \
@@ -229,7 +229,7 @@ def ksampler_wrapper(model, seed, steps, cfg, sampler_name, scheduler, positive,
         # print(f"post: {end_at_step} .. {advanced_steps + 1} / {advanced_steps}")
         refined_latent = separated_sample(refiner_model, False, seed, advanced_steps, cfg, sampler_name, scheduler,
                                           refiner_positive, refiner_negative, temp_latent, end_at_step, advanced_steps + 1, False,
-                                          sigma_ratio=sigma_factor, scheduler_func=scheduler_func)
+                                          sigma_ratio=sigma_factor, sampler_opt=sampler_opt, scheduler_func=scheduler_func)
 
     return refined_latent
 

modules/impact/impact_server.py

@@ -17,7 +17,6 @@ import numpy as np
 import nodes
 from PIL import Image
 import io
-import impact.wildcards as wildcards
 import comfy
 from io import BytesIO
 import random
@@ -183,7 +182,7 @@ async def wildcards_list(request):
 @PromptServer.instance.routes.post("/impact/wildcards")
 async def populate_wildcards(request):
     data = await request.json()
-    populated = wildcards.process(data['text'], data.get('seed', None))
+    populated = impact.wildcards.process(data['text'], data.get('seed', None))
     return web.json_response({"text": populated})
 
 
@@ -512,7 +511,7 @@ def onprompt_populate_wildcards(json_data):
                 else:
                     input_seed = int(inputs['seed'])
 
-                inputs['populated_text'] = wildcards.process(inputs['wildcard_text'], input_seed)
+                inputs['populated_text'] = impact.wildcards.process(inputs['wildcard_text'], input_seed)
                 inputs['mode'] = 'reproduce'
 
                 PromptServer.instance.send_sync("impact-node-feedback", {"node_id": k, "widget_name": "populated_text", "type": "STRING", "value": inputs['populated_text']})

modules/impact/utils.py

@@ -178,31 +178,71 @@ def tensor2numpy(image):
 
 
 def tensor_paste(image1, image2, left_top, mask):
-    """Mask and image2 has to be the same size"""
+    """
+    Pastes image2 onto image1 at position left_top using mask.
+    Supports both RGB and RGBA images.
+    """
     _tensor_check_image(image1)
     _tensor_check_image(image2)
     _tensor_check_mask(mask)
+    
     if image2.shape[1:3] != mask.shape[1:3]:
         mask = resize_mask(mask.squeeze(dim=3), image2.shape[1:3]).unsqueeze(dim=3)
-        # raise ValueError(f"Inconsistent size: Image ({image2.shape[1:3]}) != Mask ({mask.shape[1:3]})")
-
+    
     x, y = left_top
-    _, h1, w1, _ = image1.shape
-    _, h2, w2, _ = image2.shape
-
-    # calculate image patch size
+    _, h1, w1, c1 = image1.shape
+    _, h2, w2, c2 = image2.shape
+    
+    # Calculate image patch size
     w = min(w1, x + w2) - x
     h = min(h1, y + h2) - y
-
+    
     # If the patch is out of bound, nothing to do!
     if w <= 0 or h <= 0:
         return
-
+    
     mask = mask[:, :h, :w, :]
-    image1[:, y:y+h, x:x+w, :] = (
-        (1 - mask) * image1[:, y:y+h, x:x+w, :] +
-        mask * image2[:, :h, :w, :]
-    )
+    
+    # Get the region to be modified
+    region1 = image1[:, y:y+h, x:x+w, :]
+    region2 = image2[:, :h, :w, :]
+    
+    # Handle RGB and RGBA cases
+    if c1 == 3 and c2 == 3:
+        # Both RGB - simple case
+        image1[:, y:y+h, x:x+w, :] = (1 - mask) * region1 + mask * region2
+    
+    elif c1 == 4 and c2 == 4:
+        # Both RGBA - need to handle alpha channel separately
+        # RGB channels
+        image1[:, y:y+h, x:x+w, :3] = (
+            (1 - mask) * region1[:, :, :, :3] +
+            mask * region2[:, :, :, :3]
+        )
+        
+        # Alpha channel - use "over" composition
+        a1 = region1[:, :, :, 3:4]
+        a2 = region2[:, :, :, 3:4] * mask
+        new_alpha = a1 + a2 * (1 - a1)
+        image1[:, y:y+h, x:x+w, 3:4] = new_alpha
+    
+    elif c1 == 4 and c2 == 3:
+        # Target is RGBA, source is RGB - assume source is fully opaque
+        image1[:, y:y+h, x:x+w, :3] = (
+            (1 - mask) * region1[:, :, :, :3] +
+            mask * region2
+        )
+        # Alpha channel - reduce alpha where mask is applied
+        image1[:, y:y+h, x:x+w, 3:4] = region1[:, :, :, 3:4] * (1 - mask) + mask
+    
+    elif c1 == 3 and c2 == 4:
+        # Target is RGB, source is RGBA - apply source alpha to mask
+        effective_mask = mask * region2[:, :, :, 3:4]
+        image1[:, y:y+h, x:x+w, :] = (
+            (1 - effective_mask) * region1 +
+            effective_mask * region2[:, :, :, :3]
+        )
+    
     return
 
 

modules/impact/wildcards.py

@@ -8,6 +8,7 @@ import numpy as np
 import threading
 from impact import utils
 from impact import config
+import logging
 
 
 wildcards_path = os.path.abspath(os.path.join(os.path.dirname(__file__), "..", "..", "wildcards"))
@@ -65,7 +66,7 @@ def read_wildcard_dict(wildcard_path):
                     with open(file_path, 'r', encoding="UTF-8", errors="ignore") as f:
                         lines = f.read().splitlines()
                         wildcard_dict[key] = [x for x in lines if not x.strip().startswith('#')]
-            elif file.endswith('.yaml'):
+            elif file.endswith('.yaml') or file.endswith('.yml'):
                 file_path = os.path.join(root, file)
 
                 try:
@@ -211,7 +212,7 @@ def process(text, seed=None):
                 selected_items = random_gen.choice(options, p=normalized_probabilities, size=select_count, replace=False)
 
             # x may be numpy.int32, convert to string
-            selected_items2 = [re.sub(r'^\s*[0-9.]+::', '', str(x), 1) for x in selected_items]
+            selected_items2 = [re.sub(r'^\s*[0-9.]+::', '', str(x), count=1) for x in selected_items]
             replacement = select_sep.join(selected_items2)
             if '::' in replacement:
                 pass
@@ -219,7 +220,7 @@ def process(text, seed=None):
             replacements_found = True
             return replacement
 
-        pattern = r'{([^{}]*?)}'
+        pattern = r'(?<!\\)\{((?:[^{}]|(?<=\\)[{}])*?)(?<!\\)\}'
         replaced_string = re.sub(pattern, replace_option, string)
 
         return replaced_string, replacements_found
@@ -278,7 +279,7 @@ def process(text, seed=None):
 
                 normalized_probabilities = [prob / total_prob for prob in adjusted_probabilities]
                 selected_item = random_gen.choice(options, p=normalized_probabilities, replace=False)
-                replacement = re.sub(r'^\s*[0-9.]+::', '', selected_item, 1)
+                replacement = re.sub(r'^\s*[0-9.]+::', '', selected_item, count=1)
                 replacements_found = True
                 string = string.replace(f"__{match}__", replacement, 1)
             elif '*' in keyword:
@@ -358,6 +359,7 @@ def extract_lora_values(string):
         lbw = None
         lbw_a = None
         lbw_b = None
+        loader = None
 
         if len(item) > 0:
             lora = item[0]
@@ -376,6 +378,8 @@ def extract_lora_values(string):
                             lbw_b = safe_float(lbw_item[2:].strip())
                         elif lbw_item.strip() != '':
                             lbw = lbw_item
+                elif sub_item.startswith("LOADER="):
+                    loader = sub_item[7:]
 
         if a is None:
             a = 1.0
@@ -383,7 +387,7 @@ def extract_lora_values(string):
             b = a
 
         if lora is not None and lora not in added:
-            result.append((lora, a, b, lbw, lbw_a, lbw_b))
+            result.append((lora, a, b, lbw, lbw_a, lbw_b, loader))
             added.add(lora)
 
     return result
@@ -407,6 +411,8 @@ def resolve_lora_name(lora_name_cache, name):
             if x.endswith(name):
                 return x
 
+    return None
+
 
 def process_with_loras(wildcard_opt, model, clip, clip_encoder=None, seed=None, processed=None):
     """
@@ -427,7 +433,7 @@ def process_with_loras(wildcard_opt, model, clip, clip_encoder=None, seed=None,
     loras = extract_lora_values(pass1)
     pass2 = remove_lora_tags(pass1)
 
-    for lora_name, model_weight, clip_weight, lbw, lbw_a, lbw_b in loras:
+    for lora_name, model_weight, clip_weight, lbw, lbw_a, lbw_b, loader in loras:
         lora_name_ext = lora_name.split('.')
         if ('.'+lora_name_ext[-1]) not in folder_paths.supported_pt_extensions:
             lora_name = lora_name+".safetensors"
@@ -441,26 +447,36 @@ def process_with_loras(wildcard_opt, model, clip, clip_encoder=None, seed=None,
             path = None
 
         if path is not None:
-            print(f"LOAD LORA: {lora_name}: {model_weight}, {clip_weight}, LBW={lbw}, A={lbw_a}, B={lbw_b}")
+            logging.info(f"LOAD LORA: {lora_name}: {model_weight}, {clip_weight}, LBW={lbw}, A={lbw_a}, B={lbw_b}, LOADER={loader}")
 
-            def default_lora():
-                return nodes.LoraLoader().load_lora(model, clip, lora_name, model_weight, clip_weight)
-
-            if lbw is not None:
-                if 'LoraLoaderBlockWeight //Inspire' not in nodes.NODE_CLASS_MAPPINGS:
-                    utils.try_install_custom_node(
-                        'https://github.com/ltdrdata/ComfyUI-Inspire-Pack',
-                        "To use 'LBW=' syntax in wildcards, 'Inspire Pack' extension is required.")
-
-                    print(f"'LBW(Lora Block Weight)' is given, but the 'Inspire Pack' is not installed. The LBW= attribute is being ignored.")
-                    model, clip = default_lora()
+            if loader is not None:
+                if loader == 'nunchaku':
+                    if 'NunchakuFluxLoraLoader' not in nodes.NODE_CLASS_MAPPINGS:
+                        logging.warning(f"To use `LOADER=nunchaku`, 'ComfyUI-nunchaku' is required. The LOADER= attribute is being ignored.")
+                    cls = nodes.NODE_CLASS_MAPPINGS['NunchakuFluxLoraLoader']
+                    model = cls().load_lora(model, lora_name, model_weight)[0]
                 else:
-                    cls = nodes.NODE_CLASS_MAPPINGS['LoraLoaderBlockWeight //Inspire']
-                    model, clip, _ = cls().doit(model, clip, lora_name, model_weight, clip_weight, False, 0, lbw_a, lbw_b, "", lbw)
+                    logging.warning(f"LORA LOADER NOT FOUND: '{loader}'")
             else:
-                model, clip = default_lora()
+                def default_lora():
+                    return nodes.LoraLoader().load_lora(model, clip, lora_name, model_weight, clip_weight)
+
+                if lbw is not None:
+                    if 'LoraLoaderBlockWeight //Inspire' not in nodes.NODE_CLASS_MAPPINGS:
+                        utils.try_install_custom_node(
+                            'https://github.com/ltdrdata/ComfyUI-Inspire-Pack',
+                            "To use 'LBW=' syntax in wildcards, 'Inspire Pack' extension is required.")
+
+                        logging.warning(f"'LBW(Lora Block Weight)' is given, but the 'Inspire Pack' is not installed. The LBW= attribute is being ignored.")
+                        model, clip = default_lora()
+                    else:
+                        cls = nodes.NODE_CLASS_MAPPINGS['LoraLoaderBlockWeight //Inspire']
+                        model, clip, _ = cls().doit(model, clip, lora_name, model_weight, clip_weight, False, 0, lbw_a, lbw_b, "", lbw)
+
+                else:
+                    model, clip = default_lora()
         else:
-            print(f"LORA NOT FOUND: {orig_lora_name}")
+            logging.warning(f"LORA NOT FOUND: {orig_lora_name}")
 
     pass3 = [x.strip() for x in pass2.split("BREAK")]
     pass3 = [x for x in pass3 if x != '']
@@ -469,7 +485,7 @@ def process_with_loras(wildcard_opt, model, clip, clip_encoder=None, seed=None,
         pass3 = ['']
 
     pass3_str = [f'[{x}]' for x in pass3]
-    print(f"CLIP: {str.join(' + ', pass3_str)}")
+    logging.info(f"CLIP: {str.join(' + ', pass3_str)}")
 
     result = None
 

pyproject.toml

@@ -1,7 +1,7 @@
 [project]
 name = "comfyui-impact-pack"
 description = "This node pack offers various detector nodes and detailer nodes that allow you to configure a workflow that automatically enhances facial details. And provide iterative upscaler."
-version = "8.13"
+version = "8.17.1"
 license = { file = "LICENSE.txt" }
 dependencies = ["segment-anything", "scikit-image", "piexif", "transformers", "opencv-python-headless", "GitPython", "scipy>=1.11.4"]
 

requirements.txt

@@ -4,6 +4,6 @@ piexif
 transformers
 opencv-python-headless
 scipy>=1.11.4
-numpy<2
+numpy
 dill
 matplotlib