ComfyUI-ScaleLockedResidualDiffusion

A ComfyUI custom node pack implementing a practical MVP of Scale-Locked Residual Diffusion for the specific failure mode where a model behaves well around its native / comfortable resolution (for example ~1 MP) but drifts badly in composition, anatomy, or identity at much higher resolutions.

What it does

Instead of letting the high-resolution branch freely re-plan the image, the nodes:

1. create a low-resolution planner pass at a target megapixel level,
2. record the planner's per-step denoised x0 trajectory,
3. build nested high-resolution noise so the high-res branch shares the same coarse stochastic layout,
4. run the final high-res sampling with a scale-lock correction that preserves the base model's high-frequency residual detail.

In practice, this is meant to reduce:

• composition drift,
• anatomy drift,
• duplicate limbs / body parts,
• scene re-planning between 1 MP and 4 MP,
• the "looks like a different sample entirely" problem.

Tested high-resolution Krea 2 profile (16.78 MP)

Observed on November 11, 2026: a Krea 2 user tested 4096 × 4096 pixels (16.78 million pixels) successfully on a 96 GB Blackwell GPU using a custom merged Krea 2 checkpoint. These are user-reported visual results and sampler logs, not a benchmark across checkpoints, seeds or GPU configurations. The 4096-pixel axis is outside Krea 2 Turbo's documented 2048-pixel-axis inference range, so anatomy, composition, VRAM and speed are not guaranteed at this size.

Control	Tested trajectory profile
Final target LATENT	4096 × 4096 pixels (16.78 MP; latent 512 × 512)
planner_megapixels	3.50 (1872 × 1872 pixels after rounding)
steps / scheduler	12 / simple
sampler_name	sa_solver_pece with Spectrum Krea 2 turbo forecasts
cfg	1.0 (Krea 2 Turbo)
regeneration_mode	trajectory (visually preferred in these trials)
composition_lock_sigma	0.65
coarse_lock_strength, mid_lock_strength	0, 0
stage_megapixels	8 (explicit), or empty with automatic stages
max_stage_upscale	4.0 (pixel-area ratio, applies when stages are automatic)
latent_upscale_method	sesqui_wan21 for completed stage-to-stage handoff
sa_sde_start_percent, sa_sde_end_percent	0.20, 0.35
Spectrum configuration	turbo, warmup 2, degree 1, window 1, tail 1

At 3.50 → 16.78 MP, the automatic 4× area-growth limit already produces one intermediate stage at approximately 7.66 MP (2768 × 2768). SesquiLSR is active between that completed stage and the final stage. Without an intermediate diffusion stage, trajectory does not use SesquiLSR: its first high-resolution pass follows the planner's predictions rather than upscaling a completed planner image.

Alternatives (same final canvas and planner):

• planner_final_img2img: complete the planner and each intermediate stage before enlarging its clean latent and refining again. In a 12-step, two-stage test, img2img_start_sigma=0.70 selected five refinement steps per stage and completed in 117.72 seconds. The author preferred trajectory visually in the comparisons. Increasing start sigma permits more regeneration and can alter anatomy.
• spectral_progressive: one continuous 12-step trajectory, with no separate completed planner and no SesquiLSR handoff. Manual progressive_transition_sigmas=0.80, 0.65 divided work into 6 planner / 2 intermediate / 4 final-resolution steps and completed in 86.91 seconds in the reported run. The calibration-derived schedules instead allocated 9/1/2 or 8/1/3, and one result visibly duplicated a belly button. The manual schedule was preferred over those automatic schedules. Spectral mode ignores any saved sesqui_wan21 choice; disconnect spectral_calibration when using manual sigmas, as only one transition schedule source can be active.

Resolution-dependent settings: the 3.50 MP planner and 8 MP stage are not general defaults. A smaller output might not even be larger than a 3.50 MP planner; choose a planner below the target canvas and allow max_stage_upscale to determine the number of intermediate stages, or set explicit stage_megapixels. The general node default remains a 1.0 MP planner, native Euler sampler and interpolation for compatibility; select SA-PECE + SesquiLSR for the tested high-resolution profile. Do not interpret improved image quality at 16.78 MP on a specific checkpoint as a universal safe resolution ceiling.

Krea 2 Turbo: experimental flow-aligned regeneration

The Krea 2 Turbo Flow-Aligned Regenerate [Experimental] node is a compact Krea-2-specific integration of the existing scale-locked image sampling path. It uses the native ComfyUI Krea2 model, the Qwen Image VAE and a matching Krea2 text encoder. It is not a port of MiniMax H3's audio/video/Continuum runtime and does not load weights independently.

• Input latent_image defines the final pixel canvas (8-pixel VAE stride, two-pixel latent DiT patch; use multiples of 16 pixels). ComfyUI's standard four-channel empty latent is expanded to Krea 2's 16 channels at preflight. Native single-frame B×16×1×H×W image latents are preserved through planning, patch-coupled noise and spatial locking; multi-frame video latents are not supported by this image node.
• The Krea 2 node defaults to a 12-step schedule, an approximately 1 MP planner (safe for ordinary canvases), and composition_lock_sigma=0.65. The target latent determines the final output resolution; no fixed final MP is implied by these defaults. In trajectory mode the initial high-resolution stage follows planner predictions during its locked prefix and refines after release. The step count applies to the planner and the trajectory schedule; other regeneration modes use it differently. The planner must stay smaller than the output. Connect the same step count to a native sampler for controlled comparisons.
• CFG, sampler and scheduler are configurable on the Krea 2 node. The unchanged defaults are ComfyUI CFG 1.0 (no classifier-free guidance), Euler, simple scheduler, shift 1.15. These defaults are for Turbo, not the undistilled RAW checkpoint. cfg accepts 0–100, and scheduler exposes ComfyUI's available schedules; the generated sigma schedule is validated to be finite, strictly decreasing, within the flow domain [0, 1], and ending at zero. Non-default CFG or schedule changes the noise trajectory and therefore the composition-lock release.
• Sampler choice: euler (default), dpmpp_2m, res_multistep, deis, ipndm, ipndm_v, gradient_estimation, er_sde, sa_solver and sa_solver_pece, limited to native implementations in the installed ComfyUI. Every offered solver retains its native update and history. SA-Solver and ER-SDE can inject stochastic noise; SA-Solver PECE additionally evaluates the corrected state at the same sigma after the predictor callback (except steps without a native correction). The same selected solver runs the planner and target passes.
  • Locked steps cost no target-resolution model evaluations with any solver. Euler reaches the composition-lock release in closed form. The other solvers integrate the locked steps with their own native update, receiving the resized planner prediction in place of a target evaluation. The full lock discards the target prediction on those steps, so the result is identical to evaluating it, and the solver's history across the release is preserved. The progress bar therefore still lists locked steps for non-Euler solvers; they complete without a model call.
  • Resolution stages work with every solver. The first stage reaches the release as described above. Each later stage re-noises the previous stage's image to the release noise level and starts the solver afresh there, so multistep solvers begin that stage at first order.
  • Native ER-SDE uses ComfyUI's original VP ER-SDE solver and its first-, second-, or third-order history. The optional ER-SDE solver type, max stage (1–3), eta, and s_noise widgets are appended after existing inputs and only apply when sampler_name=er_sde. Solver types are ER-SDE, Reverse-time SDE, and ODE; ODE or eta=0 removes stochastic injection. The first flow sigma is adjusted by native ComfyUI for finite log-SNR; the lock's step matching uses that effective sigma. All ER-SDE noise increments are generated deterministically from the run seed and absolute step index. Across resolutions, a patch-phase Gaussian coupling makes the target's coarse stochastic increment match the planner while retaining independent fine-frequency noise. Later stages restart ER-SDE history at the release step; they do not inherit earlier-stage multistep derivatives.
  • Native SA-Solver and SA-Solver PECE. The optional sa_eta, sa_sde_start_percent (0.2), sa_sde_end_percent (0.35), sa_s_noise, sa_predictor_order (3), sa_corrector_order (4), and sa_simple_order_2 settings apply only to the SA-Solver choices. The default sa_sde_end_percent=0.35 (model sigma about 0.68) keeps stochastic steps in the planner and makes the high-resolution stages deterministic. With ComfyUI's native 0.8, every stage step is stochastic, and plain SA-Solver produced visible artifacts at 5–6 steps per stage. Each stage already starts from fresh release noise. sa_spectrum_forecasts (default true) lets a connected Spectrum Krea 2 model forecast SA predictor calls. False runs every native SA predictor and PECE correction, reports native_only=true and forecast=0, and serves as a quality reference. The switch changes no solver options, model weights, diffusion patches, noise fields, resolution-stage configuration or other samplers. Spectrum never consumes a raw forecast on a stochastic step, because a forecast cannot see SA's fresh noise increment. Forecasts are therefore most effective on the deterministic stages. sa_planner_spectrum_forecasts (default true) independently controls Spectrum only during the low-resolution planner pass. Set it to false while keeping sa_spectrum_forecasts=true to evaluate all planner denoisers natively, retain the same seeded noise, sigma schedule and planner anchors, then restore Spectrum acceleration for both high-resolution stages. This isolates cases where the planner preview appears over-smoothed despite a detailed final image. It is an optional quality diagnostic, not proof that forecast error causes the blur: the planner also operates at a lower native resolution. The planner and target passes report native_only and forecast separately, so verify planner native_only=true, forecast=0, target native_only=false before interpreting results. With a 14-step Spectrum turbo run that previously used 8 actual planner predictions and 6 forecasts, the expected comparison uses 14 actual planner predictions while retaining target forecast opportunities. It increases planner runtime, without changing target-stage numerical code or the underlying solver. Tested on a real Krea 2 Turbo checkpoint (14 steps, 1872→2672→3824 px, one seed): plain sa_solver at these defaults looked clean natively and with forecasts. Forecasts cut sampling time from 70 s to 45 s. If upscale stages still invent small details (for example a partly visible object turning into something else), end the window earlier, for example sa_sde_end_percent=0.30. Keep sa_s_noise and er_sde_s_noise at 1.0 on stochastic steps. A stochastic step shrinks the existing noise and re-adds fresh noise of the size the next step expects. Below 1.0 it re-adds too little, so the model sees an image cleaner than its noise level and removes real texture. On a real Krea 2 Turbo checkpoint, 0.5 made both SA-Solver and ER-SDE planners look airbrushed or plastic, and 1.0 restored sharp detail. To reduce stochasticity, narrow the window or lower sa_eta/er_sde_eta instead. The configured stochastic window uses native Krea 2 percent-to-sigma conversion. sa_eta=0 gives the native ODE mode. Noise increments use the same Gaussian patch coupling as ER-SDE, but are generated by the absolute sigma transition because SA-Solver samples noise only inside its selected SDE interval. In PECE mode, the planner retains both the predictor and corrected-state predictions. The target uses each corresponding planner anchor for fully locked predictor/corrector calls; native corrected-state evaluations resume outside the lock. Restarted resolution stages use a fresh native predictor/corrector history. This is not an Euler approximation or a one-evaluation PECE shortcut.
  • Non-Euler solvers, including ER-SDE and both SA-Solvers, are experimental. Their trajectories differ from Euler and require visual validation with matched seeds. Other ancestral/SDE and multi-evaluation solvers (e.g. Heun) remain unoffered.
  • With Spectrum Krea 2 PR #2, all ten sampler choices (Euler, DPM++ 2M, RES Multistep, Gradient Estimation, DEIS, iPNDM, iPNDM-V, ER-SDE, SA-Solver and SA-Solver PECE) can forecast on audited native paths. SA-Solver PECE forecasts eligible predictor opportunities and always evaluates corrected-state calls natively; reports count the latter separately. DEIS coefficient helpers and ER-SDE sigma/log-SNR conversion helpers are separately checked. ER-SDE accepts the validated native scaler, stage, noise strength and noise sampler options; unreviewed options or altered native solver/helper sources fail closed. Forecasting may change image quality, especially anatomy, and must be visually tested with the same seed and conditioning. Spectrum's forecast history is built only from unlocked target evaluations, as with Euler.
• High-resolution noise is drawn from an exact Gaussian conditional coupling: within every 2x2 transformer-patch phase the normalized grouped projection matches the source Gaussian field, including noninteger upscaling ratios. This is a stochastic consistency invariant, not a learned image upscaler.
• composition_lock_sigma (optional, default 0.65) sets where the high-resolution pass takes over. Target steps that start above this noise level use the planner's denoised prediction in every frequency band, so the target state is exactly the resized planner state carrying the target noise. At those noise levels the high-resolution model would otherwise commit to its own composition; mixing only the planner's coarse bands into it can superimpose two layouts, visible as duplicated or displaced contours. Lower values keep more of the planner image and leave fewer steps for new detail; 1.0 disables the full lock. With the 12-step Krea 2/simple schedule (shift 1.15), the default locks steps whose starting sigma exceeds 0.65. The exact count depends on the selected schedule and solver. Locked steps cost no high-resolution model evaluations: with Euler the target state at the release is computed in closed form from the planner predictions and the sampler starts there; other solvers step through the locked steps natively with the planner predictions. With a target spatial mask or latent noise mask, locked steps use the evaluated path rather than the no-DiT shortcut. Spatial masks blend in target predictions; latent noise masks require retaining the sampler's masked execution behavior.
• Resolution stages. Large jumps from the planner to the output are split into a ladder of intermediate resolutions, so no single handoff upscales by more than max_stage_upscale. The first stage reaches the composition-lock release from the planner predictions, exactly like a single-stage run. Each later stage takes the finished image of the stage below, resized to its own size, re-noises it to the same release noise level with its own patch-coupled noise, and runs the remaining steps. Every stage therefore repeats the bounded planner-to-target handoff from a sharp image. Handing over mid-schedule predictions instead was observed to fail: they are blurry noise-conditional averages, and a later, lower-noise start rendered that blur as defocus with speckle.
  • max_stage_upscale (default 4.0, i.e. 2x per side) is the largest pixel-area growth per stage. Jumps larger than that get geometrically spaced intermediate stages; 0 always jumps straight to the output.
  • stage_megapixels lists explicit intermediate sizes, e.g. 4, 8, and overrides max_stage_upscale.
  • Each later trajectory stage runs the suffix after the release, adding evaluations at its own size. With 12 steps and the default 0.65 release, the suffix contains four native diffusion steps on the tested simple schedule; actual denoiser calls also depend on the sampler and Spectrum forecasts.
• After the release, the high-resolution pass refines freely by default. coarse_lock_strength and mid_lock_strength (default 0) optionally keep blending the low and middle spatial frequencies of each denoised prediction toward the planner. Their bands are defined relative to the target canvas, so at large sizes they include fine structures such as fingers, jewelry and seams. The planner version of those structures is upscaled and blurred. Nonzero values were observed to double fine contours and soften texture, and are kept only for experiments. composition_lock_sigma is a starting value, not a calibrated optimum.
• Regeneration mode (regeneration_mode, optional, default trajectory) selects how the first high-resolution stage starts.

  • trajectory is the behavior described above: above composition_lock_sigma the first high-resolution stage follows the planner's denoising trajectory (its intermediate denoised predictions), then refines freely.

  • planner_final_img2img runs the planner to completion and treats its finished latent as an image to refine. Each high-resolution stage resizes the finished latent of the stage below (the planner for the first stage), and native ComfyUI sampling re-noises it to the start sigma s: x = s * noise + (1 - s) * clean, with clean the resized latent in the model's internal space (process_latent_in) and noise a fresh, seed-deterministic Gaussian field for each stage, independent of the Gaussian field that generated its clean source. The same patch-coupled algorithm lifts that fresh field to the stage resolution. The selected native solver then runs from s to zero from a fresh start: no multistep history, PECE correction, planner trajectory prediction or composition lock is carried into it. composition_lock_sigma is not used in this mode, and coarse_lock_strength and mid_lock_strength must be 0 (nonzero values are rejected). All ten samplers and Spectrum forecasting are supported; latent noise masks are rejected.

  • img2img_start_sigma (default 0.65, planner-final mode only) chooses s. The normal schedule selects how many steps remain, then its first retained sigma is replaced with the requested sigma (no extra model call). All later sigmas remain the original native schedule values. The start noise therefore responds to each slider change, instead of silently snapping to a discrete schedule point. For example, with 20 steps, requests 0.30 and 0.35 both retain 2 refinement steps per stage, but start at different noise levels (0.30 versus 0.35), yielding different target denoiser inputs. Changing the value across a schedule boundary can also change the number of remaining steps. Lower noise generally preserves more of the finished image but may leave insufficient refinement; raise steps if needed. Neither setting guarantees correct anatomy. The effective sigma and number of steps are logged.

    steps	start 0.45	start 0.65	start 0.75
    14	sigma 0.450, 2 steps	sigma 0.650, 5 steps	sigma 0.750, 6 steps
    20	sigma 0.450, 4 steps	sigma 0.650, 7 steps	sigma 0.750, 9 steps

    Each stage evaluates the model once per remaining step (SA-Solver PECE also evaluates its corrections), the same per-stage cost as the trajectory mode at an equal release sigma.

  • Native-range refine + learned final upscale: For outputs above Krea 2 Turbo's documented 2048px-per-axis inference range, set regeneration_mode=planner_final_native_refine, latent_upscale_method=sesqui_wan21, keep stage_megapixels empty, and use img2img_start_sigma as in planner-final img2img. This finishes the planner, runs one native img2img target pass at no more than 2048px on either axis (with the final canvas aspect ratio), then enlarges the completed native output through SesquiLSR to the requested dimensions without running diffusion at the final size. The planner must be smaller than the native refinement canvas on both axes. Both band-lock strengths must be 0. This retains some model-based detail synthesis, which planner_final_upscale_only cannot produce, while avoiding target denoising outside the advertised resolution range. It is experimental, and does not guarantee anatomically correct refinement or absence of VAE/upscaler artifacts. The prior modes, including the interpolation default, remain unchanged.

  • Planner-final learned upscale without target denoising: Select regeneration_mode=planner_final_upscale_only and latent_upscale_method=sesqui_wan21. The sampler completes the planner, enlarges its clean output-space Wan VAE latent to the requested canvas (using the configured intermediate sizes, if any), and returns it directly. It does not re-noise or run the 3552px target diffusion model. It makes no target DiT calls, so it cannot obtain texture from high-resolution regeneration; the high-resolution result is limited by the trained latent upscaler and VAE decode. It is an optional preservation comparator and usable artifact-avoidance mode, not a proven cure for incorrect anatomy. img2img_start_sigma and composition_lock_sigma have no effect in this mode. Both band lock strengths must be zero. The existing trajectory and planner_final_img2img modes are unchanged.

  • Retired planner-fidelity experiment: the optional planner_fidelity_strength and planner_detail_strength widgets are retained at their existing positions to avoid remapping older saved workflows. planner_fidelity_strength must remain 0: nonzero values fail before sampling. Real Krea 2 images exposed severe ghosting at full planner measurement fidelity, including when the added detail strength was zero. planner_detail_strength is inactive at fidelity 0. A correct latent downsampling measurement does not guarantee a correctly decoded or anatomically faithful image. No projection is performed in the active modes.

  • To distinguish latent-resize damage from model-generated damage, enable handoff_diagnostics=log_and_save_latents: besides the finished planner, noisy handoff states and denoised steps, each resolution stage now saves stageN_source_resized.latent in the same diagnostics directory. Decode the resized clean source with the same VAE as the final result. If it already contains duplicated geometry, that occurs before the high-resolution diffusion pass; the latent interpolation itself is unsuitable for a fidelity-preserving handoff.

  • The mode has been checked only on a small random CPU model for execution and initialization correctness. Whether it preserves a real planner image better than the trajectory mode is not yet established: compare both modes at the same seed, prompt, sizes, sampler and steps, with the lowres_planner output as the reference.

• Spectral progressive sampling (regeneration_mode=spectral_progressive, experimental). An optional fifth mode that runs one denoising trajectory instead of a planner pass plus high-resolution passes. It starts at the planner size and grows to each intermediate stage and then to the output size during sampling, so early, noise-dominated steps run on smaller grids. It implements the spectral noise expansion and transition scheduling of Spectral Progressive Diffusion (Xiao et al., 2026, arXiv:2605.18736; official MIT reference implementation howardhx/speed). The implementation here is independent; no third-party code is included.

  • Transition. At each transition the sampler's noisy state, not a denoised prediction, is carried to the larger grid. Its orthonormal 2-D DCT coefficients are kept, every new higher-frequency coefficient receives fresh Gaussian noise of the current noise level, the state is rescaled by kappa = r / (1 + (r - 1) sigma) and sampling continues at the aligned noise level sigma~ = kappa * sigma, with r the square root of the actual latent-area ratio. With x = (1 - sigma) x0 + sigma * noise, this gives a state of exactly the same form at sigma~: the noise is exactly white Gaussian of variance sigma~^2, and the low-frequency image content keeps its amplitude. Only the image content above the smaller grid's resolution is missing, which is why transitions must happen while those frequencies are still dominated by noise. The expansion runs on the sampler device in float32 with separable n x n DCT bases (under 0.1 s on CPU for a 2048 px to 4096 px transition); it adds no denoiser evaluations.

  • Why this does not repeat the rejected staggered ladder. The rejected ladder started later stages from mid-schedule denoised predictions, which are blurry averages, at a lower noise level, so the blur was rendered as defocus and speckle. Here no prediction is ever used as an image: the true noisy state continues on the larger grid, and the time alignment makes its noise level consistent with its content. The two remaining requirements are the transition schedule (frequencies that the smaller grid cannot carry must still be noise dominated) and the latent content of the small grid behaving like a low-pass version of the large one; the second is an assumption, not a guarantee.

  • Transition schedule. Exactly one source is used and logged: progressive_transition_sigmas (one value per resolution change, strictly decreasing; each transition happens at the first step whose sigma is at or below its value); otherwise a connected spectral_calibration (below); otherwise, for a single transition only, composition_lock_sigma, i.e. the same step at which trajectory mode releases its composition lock. Transitions that would leave a resolution without a step, or are never reached, are rejected before sampling; nothing is silently re-planned.

  • Spectral scheduling. The Krea 2 Spectral Calibration (Scale-Locked) node fits a radial power law P(w) = A * w^-beta to clean latents in the model's internal latent space (where sampler noise has unit variance), using an orthonormal FFT, with w in cycles per image along the shorter side. It runs no model. Use finished latents near the intended output size, e.g. a completed Krea 2 generation loaded with LoadLatent, or a representative photo via Load Image -> VAE Encode (using the Krea 2/Qwen Image VAE). Do not feed the shared Empty Latent/target canvas into the calibration node: it is a zero-filled generation placeholder, commonly with 4 channels, whereas Krea 2 calibration needs a clean, populated 16-channel image latent. The node rejects empty or mismatched inputs with wiring guidance. With tolerance spectral_tolerance (delta, default 0.01), a frequency stops being noise dominated at 1 / (1 + sqrt(delta / (P (1 + P - delta)))); each stage hands over at the first schedule sigma at or below that value for the lowest frequency it cannot represent. As in the reference implementation, this uses the output grid's spectrum against the stage's own sigma, which hands over earlier (more conservatively) than a full-resolution-equivalent criterion would. Calibrations are rejected before sampling when the fit is poor (R² below 0.9, exponent outside 0.5–5, fewer than 8 frequency bins), when they belong to another latent format or channel count, or when the output's shorter side differs from the calibration's by more than 2x. Within that range the amplitude is rescaled by the squared side ratio (per-pixel latent variance does not depend on resolution); outside it, recalibrate. Preset coefficients measured for other models are deliberately not offered: their latent normalizations differ and they do not transfer to Krea 2.

  • Measured Krea 2 spectrum (schedule evidence, not image quality). Twelve DIV2K photographs, center-cropped to 1024x1024 and encoded with Krea 2's VAE, fit A = 41.1, beta = 1.99 (R² 0.989). Individual photos ranged from A = 17 to 105 and beta = 1.70 to 2.37, so content strongly affects the schedule; calibrate on representative content. On ComfyUI's simple schedule for Krea 2 (shift 1.15), a 1024 px to 2048 px transition with that calibration falls at:

    delta	threshold	8 steps (low / full)	52 steps (low / full)
    0.001	0.868	3 / 5	17 / 35
    0.01	0.675	5 / 3	32 / 20
    0.05	0.476	7 / 1	41 / 11
    composition_lock_sigma 0.80	0.80	4 / 4	23 / 29

    These are measured spectra applied to the documented criterion; whether a given split preserves Krea 2 image quality has not been measured.

  • Cost. Each low-resolution step costs a DiT evaluation on the smaller grid instead of the output grid, and no planner pass or repeated high-resolution pass is run. With a 1024 px stage for a 2048 px output and the 0.80 split above, 4 of 8 (Turbo) or 23 of 52 (Raw) evaluations run on a quarter of the tokens. Wall-clock speedup and peak memory on GPU have not been measured.

  • Solvers. All ten offered solvers are supported. Every resolution is a separate native sampler call at its own latent size, so ComfyUI reserves memory for the true size, and multistep history (DPM++ 2M, DEIS, iPNDM, RES Multistep, Gradient Estimation, ER-SDE, SA-Solver) and SA-Solver PECE corrections restart at first order after each transition; derivatives of a smaller grid cannot be reused on a larger one. ER-SDE and SA-Solver keep their seeded, patch-coupled per-step stochastic increments; the new high-frequency coefficients of each transition use their own seeds, separate from the initial noise and from solver increments. The first segment is identical to the planner's first steps in the other modes (same noise, seeds and solver), so its composition starts the same way.

  • Spectrum. Each resolution is its own Spectrum session; a forecast never uses features from a different grid. Warm-up therefore repeats after every transition, which reduces forecast savings.

  • Requirements and limits. coarse_lock_strength and mid_lock_strength must be 0, latent_upscale_method must be interpolate internally (a saved sesqui_wan21 selection is ignored, because nothing completed is enlarged), latent noise masks and handoff_diagnostics=log_and_save_latents are rejected; all of this is checked before any model call. log diagnostics are accepted; the mode always logs its transitions, aligned sigmas and denoiser calls per resolution. sa_planner_spectrum_forecasts has no effect (there is no separate planner). The lowres_planner output holds the denoised prediction at the last small-grid step, not a finished planner image. Every random field is seeded, so identical settings reproduce the same trajectory (bitwise only where the device kernels are deterministic).

  • In other modes a connected spectral_calibration never changes sampling. In trajectory mode it logs, for each handoff, the lowest release sigma at which frequencies above the source grid are still noise dominated, and warns when composition_lock_sigma is below it (risk of defocus). Saved progressive_transition_sigmas values are ignored in other modes and become active again when switching to spectral_progressive.

• Latent upscale method (latent_upscale_method, optional, default interpolate) chooses how a completed lower-resolution latent is enlarged before the next stage re-noises and refines it.

  • interpolate is the original bilinear latent resize. It stays bitwise identical to earlier versions.

  • sesqui_wan21 uses the pretrained SesquiLSR Wan 2.1 latent upscaler (LoganBooker/SesquiLSR, MIT), bundled under third_party/sesqui_lsr with its license. Krea 2 uses the Wan 2.1 VAE, and ComfyUI hands Krea 2 LATENTs around as raw VAE latents (the latent format's z-score is applied only inside process_latent_in), which is the space these weights were trained on. The upscaler only sees clean, completed latents: the finished planner and finished stage outputs returned by the native sampler, never a noisy sampler state or an internal model tensor.

  • Where it applies: every planner_final_img2img stage (the finished planner for the first stage, then each finished stage), and trajectory stages after the first. The trajectory mode's first stage follows planner predictions instead of enlarging a finished image, so it is unchanged. trajectory with sesqui_wan21 is valid even when no intermediate stage is needed: the original trajectory runs unchanged, and the backend logs that the learned upscaler is inactive for this invocation. It does not load unused upscaler weights or insert an extra diffusion stage. With intermediate stages, SesquiLSR remains active on completed stage-to-stage handoffs. An empty stage_megapixels field permits automatic intermediate stages when the output/planner pixel-area growth exceeds max_stage_upscale (default 4× area growth); a ratio of 6 requires a stage, whereas a ratio of 3 does not.

  • Output sizes are exact. SesquiLSR is trained for 1x to 2x per axis; a larger jump (for example a direct 1408 px to 3552 px handoff) is split into the fewest latent-only passes that each stay within 2x. No diffusion stage, sigma, noise or model call is added; solvers, Spectrum, seeds and sampler noise are unchanged.

  • The weights (SHA-256 d1b4c2c1…2d015a) are verified before the planner runs and are never downloaded at runtime. The upscaler runs in fp32 on the sampler's device, one image at a time, with one cached instance per device.

  • Measured before denoising, with the real Wan 2.1 VAE (ComfyUI wan_2.1_vae.safetensors): 8 photos with hands, rings, bracelets and faces, Lanczos-downsampled to 384 px, encoded, enlarged in latent space, decoded, and compared with the original. Mean over the 8 photos (LPIPS uses VGG; lower is better):

    Per-axis ratio	Method	LPIPS	PSNR dB	SSIM	Edge F1
    1.83x	interpolate	0.415	22.7	0.638	0.348
    1.83x	sesqui_wan21	0.197	30.3	0.875	0.866
    2.00x	interpolate	0.445	22.5	0.633	0.317
    2.00x	sesqui_wan21	0.224	29.9	0.862	0.832
    2.50x (2 passes)	interpolate	0.482	22.4	0.629	0.281
    2.50x (2 passes)	sesqui_wan21	0.311	28.5	0.818	0.752

    sesqui_wan21 was better on every metric for all 8 photos at every ratio (1.5x too). Bilinear-enlarged latents decode with a latent-grid pattern and smeared, doubled contours on fingers and eyes; the learned result decodes close to the original. Direct jumps above 2x lose part of the gain, so automatic stages of at most 2x per side (the default max_stage_upscale=4) remain preferable. This measures the clean source handed to the high-resolution pass, not the final sampled image: whether the improvement survives denoising on a real Krea 2 checkpoint has not been measured yet.

  • Cost (CPU, 4 threads, fp32, one image): 2.8 s and +0.8 GiB peak memory for 1408 px to 2240 px; 7.8 to 8.0 s and +1.8 GiB for 2240 px to 3552 px or 2448x1632 to 4608x3072; 10.7 s and +1.9 GiB for a direct two-pass 1408 px to 3552 px jump. GPU time was not measured; GPU activation memory is expected to be of the same order and is transient. No DiT evaluations are added.

• Handoff diagnostics (handoff_diagnostics, optional, default off) work in both modes and never change the sampled result. log reports, for every high-resolution step: the sigma, whether the step was composition-locked, how far the denoised prediction is from the finished planner on the planner grid (x0_vs_planner_lowband), how far the state's clean component (x - sigma * noise) / (1 - sigma) is from the finished planner (state_clean_vs_planner_lowband) and from the stage's resized source (state_clean_vs_stage_source, about 0 at the start of a planner-final stage by construction), and the prediction's distance from the resized source (x0_vs_stage_source). Relative errors are L2-norm ratios. The clean-component metrics are exact at the start of each stage and for deterministic solvers; steps after stochastic noise injection include that noise. log_and_save_latents also writes the finished planner, each stage's starting state (and, in trajectory mode, the state at the lock release), and every denoised prediction as .latent files under output/scale_locked_diagnostics/. Load them with LoadLatent and VAE Decode to see the actual tensors that the live preview approximates. Nothing is decoded inside the sampler.
• Five-stage handoff diagnostic viewer: Import workflows/krea2-handoff-diagnostics.json after one generation with handoff_diagnostics=log_and_save_latents. The loader reads the latest complete run directly from ComfyUI's output directory, without manual file copying. Five labeled VAEDecode / PreviewImage pairs show: A the finished planner; B the finished planner enlarged to the first-stage size. In the planner-final modes this is the clean latent the first stage re-noises and starts from. In trajectory mode it is only a reference: the first stage starts from noise and follows the planner's intermediate predictions, so artifacts in B do not come from the trajectory handoff. C first-stage initial x0 prediction; D the completed first high-resolution stage; and E the actual final sampler latent. The completed-stage and final files come directly from the native sampler return values, not x0 callback estimates. The viewer adds no model calls. It defaults to run_folder=latest, but accepts a specific run folder. The VAELoader's example filename does not establish which VAE was used in the generation: select the same original VAE for all five previews. Differences after VAE Decode can be caused by the decoder if the wrong weights are selected. These comparisons do not reproduce downstream SPCA/HDR/other image postprocessors; compare output E to the sampler's direct VAE decode, not a processed final image.
• The output is the high-resolution LATENT, lowres_planner is the planner LATENT, and denoised_output is the available final x0 preview LATENT.

For an initial experiment, use a 1024x1024 planner (1.0 MP) and a 2048x2048 final latent (4.19 MP). Use the same native model, prompt, seed, LoRAs and reference conditioning in both stages, all supplied through the single node. The source/target widths need not have an integral ratio. The official Krea 2 Turbo range is roughly 1K–2K per axis; larger target canvases are experimental and may run out of memory or generate artifacts.

A meaningful A/B must compare the same high-resolution model, step count (12 by default), seed, prompt and conditioning both with and without the two-pass method. Connect one step-count input to both nodes. Judge composition/subject preservation, duplicated objects, typography, fine-texture detail and wall time/VRAM. Real Krea 2 checks so far are limited to individual visual comparisons, not a systematic evaluation; there is no claimed universal quality or speed improvement. With the 12-step simple scheduler and composition lock at 0.65, the planner performs 12 steps, while each target-stage Euler suffix contains four steps. Additional stages add work; Spectrum and PECE change actual denoiser evaluation counts. The goal is structural consistency, not guaranteed throughput. For RAW or arbitrary samplers not supported by the Krea-specific flow-aligned handoff, use the generic Scale-Locked Residual KSampler. That generic path has different noise-coupling and resolution-stage semantics; it is not interchangeable with the Krea-specific integration.

Resolution Selector (Uncapped)

Resolution Selector (Uncapped) (category utilities) behaves like ComfyUI's built-in Resolution Selector: the same aspect ratios, megapixel convention (1 MP = 1024x1024 pixels), multiple rounding and live resolution preview. The built-in node caps megapixels at 16; this one accepts up to 256, the largest square canvas ComfyUI latents allow (16384 pixels per side). A ratio and size that would exceed 16384 pixels on either side is rejected with an error instead of failing later in the empty-latent node. On ComfyUI versions without the preview widget it falls back to the same calculation without the preview.

Nodes

1. Scale-Locked Residual KSampler

Main all-in-one node. It still owns the full SLRD runtime internally and is the easiest entry point.

Outputs

• output: final high-res latent
• lowres_planner: final low-res planner latent
• denoised_output: final high-res denoised x0 latent when available

2. Scale-Locked Runtime Context

Builds the reusable SLRD runtime bundle for ComfyUI's modular custom-sampling path.

Outputs

• runtime: internal SLRD planner/noise context
• prepared_noise: a NOISE object containing the aligned nested high-res noise
• lowres_planner: final low-res planner latent

Use this before SamplerCustomAdvanced when you want the modular graph equivalent of the all-in-one sampler.

3. Scale-Locked CFG Guider

Public guider node for the standard ComfyUI GUIDER contract. This applies the scale-lock denoiser correction using a runtime from Scale-Locked Runtime Context and returns a fresh patched guider instead of mutating the upstream guider object in place.

Important: this node is only the denoiser-side piece. Full SLRD behavior still depends on the paired runtime context so the high-res noise field is aligned with the low-res planner branch.

4. Scale-Locked Residual SamplerCustomAdvanced

One-node version of the modular custom-sampling workflow. Internally it now calls the same runtime builder and guider patcher that power the public guider node.

5. Scale-Locked Detailer Hook Provider

Experimental Impact Pack / FaceDetailer integration path.

This node returns a DETAILER_HOOK object that captures the FaceDetailer crop mask in post_upscale(...) and drives the masked residual/manifold correction through the hook's sampler path.

The live hook path is pre_ksample(...) plus the custom sampler/runtime integration, not the inert post_encode(...) / pre_decode(...) pair.

This provider no longer advertises sampler-runtime controls that do not participate in its live sampler-driven hook path. The exposed knobs are the ones that still affect the masked latent correction directly:

• residual lock strength and cutoffs,
• optional manifold companding controls,
• optional lock_mask / manifold_mask, which are intersected with the FaceDetailer support mask.

Compatibility note: this provider's input signature changed when the inert detailer-only sampler/runtime controls were removed. Older saved workflows that used the previous Scale-Locked Detailer Hook Provider input surface will need to be re-wired to the current node inputs.

This has been validated for import/compile in this repo, but not against a live current Impact Pack checkout in this environment.

6. Scale-Locked Nested Noise Preview

Utility/debug node to inspect the nested-noise construction separately.

7. Krea 2 Spectral Calibration (Scale-Locked)

Fits the clean-latent power spectrum used by spectral_progressive transition scheduling. Inputs: the Krea 2 MODEL (for its latent format) and clean, completed LATENTs near the intended output size; optional fit band fit_low/fit_high (fractions of Nyquist, default 0.05–0.9). Outputs an SLRD_SPECTRUM for the Krea 2 node's spectral_calibration input and a text report. It evaluates no model.

Suggested modular workflow

For standard ComfyUI custom sampling:

1. Build your base GUIDER normally.
2. Build sigmas and choose your sampler normally.
3. Run Scale-Locked Runtime Context with the base noise, guider, sampler, sigmas, and target latent.
4. Run Scale-Locked CFG Guider on the base guider using the returned runtime; this returns a fresh patched guider and leaves the base guider untouched.
5. Feed prepared_noise and the patched guider into SamplerCustomAdvanced.

That path uses the same SLRD runtime pieces as the all-in-one sampler instead of duplicating planner/noise logic.

FaceDetailer / Impact Pack note

A public guider node alone does not make FaceDetailer use SLRD. Scale-Locked Detailer Hook Provider is the experimental integration point for applying the masked residual/manifold correction inside the FaceDetailer crop lifecycle.

The current hook implementation is duck-typed rather than source-verified against a live Impact Pack checkout:

• FaceDetailer mask capture via post_upscale(...),
• alias-tolerant request capture via pre_ksample(...),
• masked latent correction via the custom sampler/runtime path.

Because Impact Pack's internal contracts can move, this integration should be treated as unverified runtime glue until it is exercised against the current Impact Pack source.

Installation

Clone or copy this directory into your ComfyUI custom_nodes folder:

git clone <this-repo> ComfyUI/custom_nodes/ComfyUI-ScaleLockedResidualDiffusion

Then restart ComfyUI.

No extra Python dependencies are required beyond ComfyUI + PyTorch. The SesquiLSR Wan 2.1 latent-upscaler weights used by latent_upscale_method=sesqui_wan21 are included in this repository; no separate download or SesquiLSR custom node is needed.

Suggested first settings for Flux.2 Klein 9B style use

For a first test when your high-res target is around 4 MP:

• target_megapixels = 1.0
• lock_strength = 0.85
• lock_strength_start = 0.95
• lock_strength_end = 0.25
• lock_schedule = hold_then_drop
• lock_schedule_hold = 0.35
• lock_schedule_power = 3.0
• coarse_cutoff = 0.33
• mid_band_cutoff = 0.60
• mid_band_strength = 0.35
• mid_band_schedule = linked
• sampler_guard = warn
• nested_noise_strength = 0.35

If the result still drifts too much:

• raise lock_strength toward 0.95
• lower coarse_cutoff toward 0.25
• use a lock_mask over body / face / hands

If the result feels too constrained / too similar to the low-res planner:

• lower mid_band_strength
• raise mid_band_cutoff
• lower lock_strength
• raise coarse_cutoff
• lower lock_strength_end

Current limitations

This is a carefully implemented MVP, not a mathematically complete research system.

What is already implemented:

• low-res planner trajectory capture,
• nested-noise initialization,
• denoised-space low-frequency locking,
• denoised-space mid-frequency locking,
• residual-preserving coarse-field replacement,
• optional pinned-memory anchor staging,
• conservative sampler-alignment safety gating,
• optional spatial masking,
• modular GUIDER exposure,
• Impact-facing detailer hook/provider path.

What is not implemented yet:

• automatic anatomy / pose / segmentation mask extraction,
• explicit residual-only tiled model execution,
• sigma-perfect trajectory matching for samplers that perform unusual extra model evaluations,
• scheduled cutoff animation for coarse or mid bands,
• multi-stage progressive ladders in the generic Scale-Locked samplers (the Krea 2 Turbo node supports resolution stages),
• exact support tuning for every possible exotic custom sampler,
• verified bindings for every historical Impact Pack hook/provider variant.

Files

• __init__.py - node registration
• nodes.py - ComfyUI node definitions, public guider node, and Impact hook/provider nodes
• slrd_runtime.py - shared ComfyUI runtime for planner capture, nested noise, guider patching, and final sampling
• spectral_progressive.py - spectral noise expansion, time alignment, transition scheduling and spectrum calibration
• latent_upscale.py - completed-latent enlargement backends (interpolate, sesqui_wan21)
• third_party/sesqui_lsr/ - vendored SesquiLSR architecture, Wan 2.1 weights, MIT license and provenance notice
• slrd_core.py - algorithm core, nested noise, latent resizing, residual locking, trajectory helpers